home-assistant-ds18b20.yaml

####################################################################
# 1-Wire configuration
1-wire:
  # GPIO pin used for 1-wire bus, using GPIO/BCM naming convention
  # See pinout.xyz for pin numbering info
  gpio: 4
  # Define whether an external 4.7k pull-up resistor is fitted
  # Set to true if using an external 4.7k pull-up resistor
  # If set to false, the script will enable the internal pull-up
  external-pullup: false
####################################################################
# MQTT configuration
mqtt:
  # IP address of the MQTT broker
  ip: localhost
  # Username to be used with the MQTT broker
  username: homeassistant
  # Password to be used with the MQTT broker
  password: mqttpass
####################################################################
# Sensor configuration
sensor:
  # Room name, sensor will be named: {room} temperature {count}
  # If below line is left commented, hostname will be used
  # room: office
  # Registration frequency, sensors will be registered every nth sensor reading
  registration-frequency: 10
  # Reporting frequency in seconds
  frequency: 30
####################################################################