| Option | Default | New | Setting |
|---|---|---|---|
| Machine Label | - | Anet A6 | #define CUSTOM_MACHINE_NAME "Anet A6" |
| Filament diameter | 3.0 | 1.75 | #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 |
| Waiting for stable extruder temperature | 10 | 6 | #define TEMP_RESIDENCY_TIME 6 |
| Waiting for stable bed temperature | 10 | 6 | #define TEMP_BED_RESIDENCY_TIME 6 |
| Option | Setting |
|---|---|
| Disable safe Z homing | //#define Z_SAFE_HOMING |
| Option | Setting |
|---|---|
| Enable safe Z homing | #define Z_SAFE_HOMING |
| Option | Setting |
|---|---|
| Z axis probe endstop signal | #define Z_MIN_PROBE_ENDSTOP_INVERTING true |
| Enable probe | #define FIX_MOUNTED_PROBE |
| Turn of heaters while probing | #define PROBING_HEATERS_OFF |
| Turn of fans while probing | #define PROBING_FANS_OFF |
| Travel speed while probing | #define XY_PROBE_SPEED 8000 |
| Repetition per probe | #define MULTIPLE_PROBING 2 |
| Type of leveling | #define AUTO_BED_LEVELING_LINEAR |
| Option | Setting |
|---|---|
| Probe X offset | #define X_PROBE_OFFSET_FROM_EXTRUDER -38 |
| Probe Y offset | #define Y_PROBE_OFFSET_FROM_EXTRUDER 5 |
| Probe Z offset | #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 |
| Probe left position | #define LEFT_PROBE_BED_POSITION 20 |
| Probe right position | #define RIGHT_PROBE_BED_POSITION 160 |
| Probe front position | #define FRONT_PROBE_BED_POSITION 20 |
| Probe back position | #define BACK_PROBE_BED_POSITION 180 |