Skip to content

Latest commit

 

History

History
41 lines (32 loc) · 946 Bytes

README.md

File metadata and controls

41 lines (32 loc) · 946 Bytes
Raw

Prusa RTSP Streamer

Stream from your RTSP camera to prusa connect.

Running

If you wish to run as a service (eg: using systemd on a prusalink device).

  1. Copy prusa-rtsp-streamer to /usr/local/bin
  2. Copy prusa-rtsp-streamer.service to /etc/systemd/system/
  3. Populate your config at /etc/prusa-rtsp-streamer/config.toml
  4. Test the service: systemctl start prusa-rtsp-streamer
  5. Enable the service on boot: systemctl enable prusa-rtsp-streamer

Config

snapshot_interval = 30

[[camera]]
token = "mnbdNm8ATLmJLMSvaWZh" # "custom camera" from prusa connect website
url = "rtsp://192.168.0.2:8080/h264.sdp"

[[camera]]
token = "BTGWx7tJRQGcZzh8r99r" 
url = "rtsp://192.168.0.4:8080/stream1"
username = "username"
password = "password"

Building

x64:

sudo apt install nasm
cargo build --release

Prusalink:

cargo install cross
cross build --release --target armv7-unknown-linux-gnueabihf