forked from brendangregg/perf-tools
-
Notifications
You must be signed in to change notification settings - Fork 0
/
iolatency_example.txt
350 lines (281 loc) · 17.9 KB
/
iolatency_example.txt
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
Demonstrations of iolatency, the Linux ftrace version.
Here's a busy system doing over 4k disk IOPS:
# ./iolatency
Tracing block I/O. Output every 1 seconds. Ctrl-C to end.
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 4381 |######################################|
1 -> 2 : 9 |# |
2 -> 4 : 5 |# |
4 -> 8 : 0 | |
8 -> 16 : 1 |# |
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 4053 |######################################|
1 -> 2 : 18 |# |
2 -> 4 : 9 |# |
4 -> 8 : 2 |# |
8 -> 16 : 1 |# |
16 -> 32 : 1 |# |
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 4658 |######################################|
1 -> 2 : 9 |# |
2 -> 4 : 2 |# |
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 4298 |######################################|
1 -> 2 : 17 |# |
2 -> 4 : 10 |# |
4 -> 8 : 1 |# |
8 -> 16 : 1 |# |
^C
Ending tracing...
Disk I/O latency is usually between 0 and 1 milliseconds, as this system uses
SSDs. There are occasional outliers, up to the 16->32 ms range.
Identifying outliers like these is difficult from iostat(1) alone, which at
the same time reported:
# iostat 1
[...]
avg-cpu: %user %nice %system %iowait %steal %idle
0.53 0.00 1.05 46.84 0.53 51.05
Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util
xvdap1 0.00 0.00 0.00 28.00 0.00 112.00 8.00 0.02 0.71 0.00 0.71 0.29 0.80
xvdb 0.00 0.00 2134.00 0.00 18768.00 0.00 17.59 0.51 0.24 0.24 0.00 0.23 50.00
xvdc 0.00 0.00 2088.00 0.00 18504.00 0.00 17.72 0.47 0.22 0.22 0.00 0.22 46.40
md0 0.00 0.00 4222.00 0.00 37256.00 0.00 17.65 0.00 0.00 0.00 0.00 0.00 0.00
I/O latency ("await") averages 0.24 and 0.22 ms for our busy disks, but this
output doesn't show that occasionally is much higher.
To get more information on these I/O, try the iosnoop(8) tool.
The -Q option includes the block I/O queued time, by tracing based on
block_rq_insert instead of block_rq_issue:
# ./iolatency -Q
Tracing block I/O. Output every 1 seconds. Ctrl-C to end.
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 1913 |######################################|
1 -> 2 : 438 |######### |
2 -> 4 : 100 |## |
4 -> 8 : 145 |### |
8 -> 16 : 43 |# |
16 -> 32 : 43 |# |
32 -> 64 : 1 |# |
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 2360 |######################################|
1 -> 2 : 132 |### |
2 -> 4 : 72 |## |
4 -> 8 : 14 |# |
8 -> 16 : 1 |# |
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 2138 |######################################|
1 -> 2 : 496 |######### |
2 -> 4 : 81 |## |
4 -> 8 : 40 |# |
8 -> 16 : 1 |# |
16 -> 32 : 2 |# |
^C
Ending tracing...
I use this along with the default mode to identify problems of load (queueing)
vs problems of the device, which is shown by default.
Here's a more interesting system. This is doing a mixed read/write workload,
and has a pretty awful latency distribution:
# ./iolatency 5 3
Tracing block I/O. Output every 5 seconds.
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 2809 |######################################|
1 -> 2 : 32 |# |
2 -> 4 : 14 |# |
4 -> 8 : 6 |# |
8 -> 16 : 7 |# |
16 -> 32 : 14 |# |
32 -> 64 : 39 |# |
64 -> 128 : 1556 |###################### |
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 3027 |######################################|
1 -> 2 : 19 |# |
2 -> 4 : 6 |# |
4 -> 8 : 5 |# |
8 -> 16 : 3 |# |
16 -> 32 : 7 |# |
32 -> 64 : 14 |# |
64 -> 128 : 540 |####### |
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 2939 |######################################|
1 -> 2 : 25 |# |
2 -> 4 : 15 |# |
4 -> 8 : 2 |# |
8 -> 16 : 3 |# |
16 -> 32 : 7 |# |
32 -> 64 : 17 |# |
64 -> 128 : 936 |############# |
Ending tracing...
It's multi-modal, with most I/O taking 0 to 1 milliseconds, then many between
64 and 128 milliseconds. This is how it looks in iostat:
# iostat -x 1
avg-cpu: %user %nice %system %iowait %steal %idle
0.52 0.00 12.37 32.99 0.00 54.12
Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util
xvdap1 0.00 12.00 0.00 156.00 0.00 19968.00 256.00 52.17 184.38 0.00 184.38 2.33 36.40
xvdb 0.00 0.00 298.00 0.00 2732.00 0.00 18.34 0.04 0.12 0.12 0.00 0.11 3.20
xvdc 0.00 0.00 297.00 0.00 2712.00 0.00 18.26 0.08 0.27 0.27 0.00 0.24 7.20
md0 0.00 0.00 595.00 0.00 5444.00 0.00 18.30 0.00 0.00 0.00 0.00 0.00 0.00
Fortunately, it turns out that the high latency is to xvdap1, which is for files
from a low priority application (processing and writing log files). A high
priority application is reading from the other disks, xvdb and xvdc.
Examining xvdap1 only:
# ./iolatency -d 202,1 5
Tracing block I/O. Output every 5 seconds. Ctrl-C to end.
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 38 |## |
1 -> 2 : 18 |# |
2 -> 4 : 0 | |
4 -> 8 : 0 | |
8 -> 16 : 5 |# |
16 -> 32 : 11 |# |
32 -> 64 : 26 |## |
64 -> 128 : 894 |######################################|
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 75 |### |
1 -> 2 : 11 |# |
2 -> 4 : 0 | |
4 -> 8 : 4 |# |
8 -> 16 : 4 |# |
16 -> 32 : 7 |# |
32 -> 64 : 13 |# |
64 -> 128 : 1141 |######################################|
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 61 |######## |
1 -> 2 : 21 |### |
2 -> 4 : 5 |# |
4 -> 8 : 1 |# |
8 -> 16 : 5 |# |
16 -> 32 : 7 |# |
32 -> 64 : 19 |### |
64 -> 128 : 324 |######################################|
128 -> 256 : 7 |# |
256 -> 512 : 26 |#### |
^C
Ending tracing...
And now xvdb:
# ./iolatency -d 202,16 5
Tracing block I/O. Output every 5 seconds. Ctrl-C to end.
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 1427 |######################################|
1 -> 2 : 5 |# |
2 -> 4 : 3 |# |
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 1409 |######################################|
1 -> 2 : 6 |# |
2 -> 4 : 1 |# |
4 -> 8 : 1 |# |
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 1478 |######################################|
1 -> 2 : 6 |# |
2 -> 4 : 5 |# |
4 -> 8 : 0 | |
8 -> 16 : 2 |# |
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 1437 |######################################|
1 -> 2 : 5 |# |
2 -> 4 : 7 |# |
4 -> 8 : 0 | |
8 -> 16 : 1 |# |
[...]
While that's much better, it is reaching the 8 - 16 millisecond range,
and these are SSDs with a light workload (~1500 IOPS).
I already know from iosnoop(8) analysis the reason for these high latency
outliers: they are queued behind writes. However, these writes are to a
different disk -- somewhere in this virtualized guest (Xen) there may be a
shared I/O queue.
One way to explore this is to reduce the queue length for the low priority disk,
so that it is less likely to pollute any shared queue. (There are other ways to
investigate and fix this too.) Here I reduce the disk queue length from its
default of 128 to 4:
# echo 4 > /sys/block/xvda1/queue/nr_requests
The overall distribution looks much better:
# ./iolatency 5
Tracing block I/O. Output every 5 seconds. Ctrl-C to end.
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 3005 |######################################|
1 -> 2 : 19 |# |
2 -> 4 : 9 |# |
4 -> 8 : 45 |# |
8 -> 16 : 859 |########### |
16 -> 32 : 16 |# |
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 2959 |######################################|
1 -> 2 : 43 |# |
2 -> 4 : 16 |# |
4 -> 8 : 39 |# |
8 -> 16 : 1009 |############# |
16 -> 32 : 76 |# |
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 3031 |######################################|
1 -> 2 : 27 |# |
2 -> 4 : 9 |# |
4 -> 8 : 24 |# |
8 -> 16 : 422 |###### |
16 -> 32 : 5 |# |
^C
Ending tracing...
Latency only reaching 32 ms.
Our important disk didn't appear to change much -- maybe a slight improvement
to the outliers:
# ./iolatency -d 202,16 5
Tracing block I/O. Output every 5 seconds. Ctrl-C to end.
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 1449 |######################################|
1 -> 2 : 6 |# |
2 -> 4 : 5 |# |
4 -> 8 : 1 |# |
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 1519 |######################################|
1 -> 2 : 12 |# |
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 1466 |######################################|
1 -> 2 : 2 |# |
2 -> 4 : 3 |# |
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 1460 |######################################|
1 -> 2 : 4 |# |
2 -> 4 : 7 |# |
[...]
And here's the other disk after the queue length change:
# ./iolatency -d 202,1 5
Tracing block I/O. Output every 5 seconds. Ctrl-C to end.
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 85 |### |
1 -> 2 : 12 |# |
2 -> 4 : 21 |# |
4 -> 8 : 76 |## |
8 -> 16 : 1539 |######################################|
16 -> 32 : 10 |# |
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 123 |################## |
1 -> 2 : 8 |## |
2 -> 4 : 6 |# |
4 -> 8 : 17 |### |
8 -> 16 : 270 |######################################|
16 -> 32 : 2 |# |
>=(ms) .. <(ms) : I/O |Distribution |
0 -> 1 : 91 |### |
1 -> 2 : 23 |# |
2 -> 4 : 8 |# |
4 -> 8 : 71 |### |
8 -> 16 : 1223 |######################################|
16 -> 32 : 12 |# |
^C
Ending tracing...
Much better looking distribution.
Use -h to print the USAGE message:
# ./iolatency -h
USAGE: iolatency [-hQT] [-d device] [-i iotype] [interval [count]]
-d device # device string (eg, "202,1)
-i iotype # match type (eg, '*R*' for all reads)
-Q # use queue insert as start time
-T # timestamp on output
-h # this usage message
interval # summary interval, seconds (default 1)
count # number of summaries
eg,
iolatency # summarize latency every second
iolatency -Q # include block I/O queue time
iolatency 5 2 # 2 x 5 second summaries
iolatency -i '*R*' # trace reads
iolatency -d 202,1 # trace device 202,1 only
See the man page and example file for more info.