Request for smartctl --scan --json output for non-standard systems

[NiceGuyIT]

PR #188 added lots of test files containing smartctl output. To test PRs such as #205, it would be nice to have the output of smartctl --scan --json. Either add them as a comment below (use spoilers) or submit them in a PR. This data should not have any sensitive data so there's no need to redact anything.

[6r4yf0x]

1

{
  "json_format_version": [
    1,
    0
  ],
  "smartctl": {
    "version": [
      7,
      1
    ],
    "svn_revision": "5022",
    "platform_info": "x86_64-linux-5.4.0-124-generic",
    "build_info": "(local build)",
    "argv": [
      "smartctl",
      "--json",
      "--scan"
    ],
    "exit_status": 0
  },
  "devices": [
    {
      "name": "/dev/sda",
      "info_name": "/dev/sda",
      "type": "scsi",
      "protocol": "SCSI"
    },
    {
      "name": "/dev/bus/0",
      "info_name": "/dev/bus/0 [megaraid_disk_01]",
      "type": "megaraid,1",
      "protocol": "SCSI"
    },
    {
      "name": "/dev/bus/0",
      "info_name": "/dev/bus/0 [megaraid_disk_02]",
      "type": "megaraid,2",
      "protocol": "SCSI"
    },
    {
      "name": "/dev/bus/0",
      "info_name": "/dev/bus/0 [megaraid_disk_03]",
      "type": "megaraid,3",
      "protocol": "SCSI"
    }
  ]
}

2

{
"json_format_version": [
  1,
  0
],
"smartctl": {
  "version": [
    7,
    1
  ],
  "svn_revision": "5022",
  "platform_info": "x86_64-linux-5.4.0-156-generic",
  "build_info": "(local build)",
  "argv": [
    "smartctl",
    "--json",
    "--scan"
  ],
  "exit_status": 0
},
"devices": [
  {
    "name": "/dev/sda",
    "info_name": "/dev/sda",
    "type": "scsi",
    "protocol": "SCSI"
  },
  {
    "name": "/dev/sdb",
    "info_name": "/dev/sdb",
    "type": "scsi",
    "protocol": "SCSI"
  },
  {
    "name": "/dev/sdc",
    "info_name": "/dev/sdc",
    "type": "scsi",
    "protocol": "SCSI"
  },
  {
    "name": "/dev/bus/0",
    "info_name": "/dev/bus/0 [megaraid_disk_04]",
    "type": "megaraid,4",
    "protocol": "SCSI"
  },
  {
    "name": "/dev/bus/0",
    "info_name": "/dev/bus/0 [megaraid_disk_05]",
    "type": "megaraid,5",
    "protocol": "SCSI"
  },
  {
    "name": "/dev/bus/0",
    "info_name": "/dev/bus/0 [megaraid_disk_06]",
    "type": "megaraid,6",
    "protocol": "SCSI"
  },
  {
    "name": "/dev/bus/0",
    "info_name": "/dev/bus/0 [megaraid_disk_07]",
    "type": "megaraid,7",
    "protocol": "SCSI"
  }
]
}

3

{
"json_format_version": [
  1,
  0
],
"smartctl": {
  "version": [
    7,
    1
  ],
  "svn_revision": "5022",
  "platform_info": "x86_64-linux-5.4.0-122-generic",
  "build_info": "(local build)",
  "argv": [
    "smartctl",
    "--json",
    "--scan"
  ],
  "exit_status": 0
},
"devices": [
  {
    "name": "/dev/sda",
    "info_name": "/dev/sda",
    "type": "scsi",
    "protocol": "SCSI"
  },
  {
    "name": "/dev/bus/0",
    "info_name": "/dev/bus/0 [megaraid_disk_17]",
    "type": "megaraid,17",
    "protocol": "SCSI"
  },
  {
    "name": "/dev/bus/0",
    "info_name": "/dev/bus/0 [megaraid_disk_18]",
    "type": "megaraid,18",
    "protocol": "SCSI"
  }
]
}

[karl-rousseau]

With the same idea, for SAS/SCSI drives, it would be nice to have those specific controller values taken into account when there are exported into JSON format using such command line:

smartctl -a -d cciss,0 /dev/sda --json=u

And there is an important HDD health metric to monitor:

"smartctl_0043_u": "Non-medium error count: 626",

When the disk is brand new, this value is equal to zero and with time, it will increase. It is very similar to the SATA one named "Reallocated sector count".