Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Configure the BQ3060 (battery gas gauge) #23

Open
ThirteenFish opened this issue Mar 12, 2014 · 1 comment
Open

Configure the BQ3060 (battery gas gauge) #23

ThirteenFish opened this issue Mar 12, 2014 · 1 comment
Assignees
@andrewgreenberg
Labels
Priority: Low

Comments

@ThirteenFish
Copy link
Member

The BQ3060 will need to be configured with some to be determined (by the hardware guys) magic values to charge the battery and function correctly.

Capability to set these values should be implemented in the common/devices/BQ3060 driver, but the actual values to be set should be implemented in flight-rnh.
@ThirteenFish
Copy link
Member Author

Apparently this can be configured once in its life and then never touched again, keeping the config through power cycles.

I'd still like to have the config written down in the RNH source so that we can verify the config is correct.

@kwilsonpdx kwilsonpdx changed the title Configue the BQ3060 (battery gas gauge) Configure the BQ3060 (battery gas gauge) May 23, 2014
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees

@andrewgreenberg andrewgreenberg

Labels
Priority: Low
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
3 participants
@kwilsonpdx @andrewgreenberg @ThirteenFish