ci.yml

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

name: ci
on:
  push:
    branches:
      - main
    tags:
      - v*
  pull_request:
    branches:
      - main
jobs:
  build_dist:
    runs-on: ${{ matrix.os_dist.os }}
    strategy:
      fail-fast: false
      matrix:
        os_dist: [
          {os: ubuntu-latest, dist: cp36-manylinux_x86_64},
          {os: ubuntu-latest, dist: cp37-manylinux_x86_64},
          {os: ubuntu-latest, dist: cp38-manylinux_x86_64},
          {os: ubuntu-latest, dist: cp39-manylinux_x86_64},
          {os: ubuntu-latest, dist: cp310-manylinux_x86_64},
          {os: ubuntu-latest, dist: cp311-manylinux_x86_64},
          {os: ubuntu-latest, dist: cp312-manylinux_x86_64},

          {os: ubuntu-latest, dist: cp36-manylinux_i686},
          {os: ubuntu-latest, dist: cp37-manylinux_i686},
          # cp38-manylinux_i686 disabled because pandas isn't prebuilt and takes 20 minutes to build.
          # {os: ubuntu-latest, dist: cp38-manylinux_i686},
          # cp39-manylinux_i686 disabled because pandas isn't prebuilt and takes 20 minutes to build.
          # {os: ubuntu-latest, dist: cp39-manylinux_i686},
          # cp310-manylinux_i686 disabled because scipy isn't prebuilt and fails to build.
          #
          # The actual error seen in github actions:
          #
          #     numpy.distutils.system_info.NotFoundError: No BLAS/LAPACK
          #     libraries found. To build Scipy from sources, BLAS & LAPACK
          #     libraries need to be installed.
          #
          #{os: ubuntu-latest, dist: cp310-manylinux_i686},

          # pypy manylinux builds disabled because scipy isn't prebuilt and fails to build.
          #
          # The actual error seen in github actions:
          #
          #     numpy.distutils.system_info.NotFoundError: No BLAS/LAPACK
          #     libraries found. To build Scipy from sources, BLAS & LAPACK
          #     libraries need to be installed.
          #
          # {os: ubuntu-latest, dist: pp37-manylinux_x86_64},
          # {os: ubuntu-latest, dist: pp38-manylinux_x86_64},
          # {os: ubuntu-latest, dist: pp39-manylinux_x86_64},
          # {os: ubuntu-latest, dist: pp37-manylinux_i686},
          # {os: ubuntu-latest, dist: pp38-manylinux_i686},
          # {os: ubuntu-latest, dist: pp39-manylinux_i686},

          # musllinux builds disabled because scipy isn't prebuilt and fails to build.
          #
          # The actual error seen in github actions:
          #
          #     numpy.distutils.system_info.NotFoundError: No BLAS/LAPACK
          #     libraries found. To build Scipy from sources, BLAS & LAPACK
          #     libraries need to be installed.
          #
          # {os: ubuntu-latest, dist: cp36-musllinux_x86_64},
          # {os: ubuntu-latest, dist: cp37-musllinux_x86_64},
          # {os: ubuntu-latest, dist: cp38-musllinux_x86_64},
          # {os: ubuntu-latest, dist: cp39-musllinux_x86_64},
          # {os: ubuntu-latest, dist: cp310-musllinux_x86_64},
          # {os: ubuntu-latest, dist: cp36-musllinux_i686},
          # {os: ubuntu-latest, dist: cp37-musllinux_i686},
          # {os: ubuntu-latest, dist: cp38-musllinux_i686},
          # {os: ubuntu-latest, dist: cp39-musllinux_i686},
          # {os: ubuntu-latest, dist: cp310-musllinux_i686},

          {os: macos-latest, dist: cp36-macosx_x86_64, macosarch: x86_64},
          {os: macos-latest, dist: cp37-macosx_x86_64, macosarch: x86_64},
          {os: macos-latest, dist: cp38-macosx_x86_64, macosarch: x86_64},
          {os: macos-latest, dist: cp39-macosx_x86_64, macosarch: x86_64},
          {os: macos-latest, dist: cp310-macosx_x86_64, macosarch: x86_64},
          {os: macos-latest, dist: cp311-macosx_x86_64, macosarch: x86_64},
          {os: macos-latest, dist: cp312-macosx_x86_64, macosarch: x86_64},

          {os: macos-latest, dist: cp38-macosx_arm64, macosarch: arm64},
          {os: macos-latest, dist: cp39-macosx_arm64, macosarch: arm64},
          {os: macos-latest, dist: cp310-macosx_arm64, macosarch: arm64},
          {os: macos-latest, dist: cp311-macosx_arm64, macosarch: arm64},
          {os: macos-latest, dist: cp312-macosx_arm64, macosarch: arm64},

          # pypy OSX builds disabled because numpy isn't prebuilt and fails to build.
          #
          # The actual error seen in github actions:
          #
          #     RuntimeError: Found /usr/lib/libcblas.dylib, but that file is a
          #     symbolic link to the MacOS Accelerate framework, which is not
          #     supported by NumPy. You must configure the build to use a
          #     different optimized library, or disable the use of optimized
          #     BLAS and LAPACK by setting the environment variables
          #     NPY_BLAS_ORDER="" and NPY_LAPACK_ORDER="" before building NumPy.
          #
          # {os: macOS-10.15, dist: pp37-macosx_x86_64},
          # {os: macOS-10.15, dist: pp38-macosx_x86_64},
          # {os: macOS-10.15, dist: pp39-macosx_x86_64},

          {os: windows-2019, dist: cp36-win_amd64},
          {os: windows-2019, dist: cp37-win_amd64},
          {os: windows-2019, dist: cp38-win_amd64},
          {os: windows-2019, dist: cp39-win_amd64},
          {os: windows-2019, dist: cp310-win_amd64},
          {os: windows-2019, dist: cp311-win_amd64},
          {os: windows-2019, dist: cp312-win_amd64},

          {os: windows-2019, dist: cp36-win32},
          {os: windows-2019, dist: cp37-win32},
          # cp38-win32 and cp39-win32 disabled because scipy fails to build.
          #
          # The actual error seen in github actions:
          #
          #    Need python for 64-bit, but found 32-bit
          #    ..\..\meson.build:82:0: ERROR: Python dependency not found
          #
          #{os: windows-2019, dist: cp38-win32},
          #{os: windows-2019, dist: cp39-win32},

          # cp310-win32 disabled because numpy isn't prebuilt and fails to build.
          #
          # The actual error seen in github actions:
          #
          #     CCompiler_spawn() got an unexpected keyword argument 'env'
          #
          # {os: windows-2019, dist: cp310-win32},
        ]
    env:
      CIBW_BUILD: "${{ matrix.os_dist.dist }}"
      CIBW_ARCHS_MACOS: "${{ matrix.os_dist.macosarch }}"
      CIBW_TEST_REQUIRES: cirq-core pytest
      CIBW_TEST_COMMAND: pytest {project}/src {project}/glue/cirq && stim help
    steps:
      - uses: actions/checkout@v3
      - uses: actions/setup-python@v3
      - run: python dev/overwrite_dev_versions_with_date.py
      - run: mkdir -p output/stim
      - run: mkdir -p output/stimcirq
      - run: mkdir -p output/sinter
      - run: python -m pip install pybind11~=2.11.1 cibuildwheel~=2.16.2 setuptools wheel
      - run: python -m cibuildwheel --print-build-identifiers
      - run: python -m cibuildwheel --output-dir output/stim
      - run: python setup.py sdist
      - run: cd glue/cirq && python setup.py sdist
      - run: cd glue/sample && python setup.py sdist
      - run: mv dist/* output/stim
      - run: mv glue/cirq/dist/* output/stimcirq
      - run: mv glue/sample/dist/* output/sinter
      - uses: actions/upload-artifact@v3
        with:
          name: dist
          path: |
            ./output/stimcirq/*.tar.gz
            ./output/sinter/*.tar.gz
            ./output/stim/*
  check_sdist_installs:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v3
      - uses: actions/setup-python@v3
      - run: python -m pip install pybind11~=2.11.1 cibuildwheel~=2.16.2 setuptools wheel
      - run: python setup.py sdist
      - run: pip install dist/*.tar.gz
  upload_dev_release_to_pypi:
    needs: ["build_dist"]
    if: github.ref == 'refs/heads/main'
    runs-on: ubuntu-latest
    steps:
      - uses: actions/download-artifact@v2
        with:
          name: dist
          path: dist
      - uses: pypa/gh-action-pypi-publish@release/v1
        with:
          user: __token__
          packages_dir: dist/stim/
          password: ${{ secrets.pypi_token_stim }}
      - uses: pypa/gh-action-pypi-publish@release/v1
        with:
          user: __token__
          packages_dir: dist/stimcirq/
          password: ${{ secrets.pypi_token_stimcirq }}
      - uses: pypa/gh-action-pypi-publish@release/v1
        with:
          user: __token__
          packages_dir: dist/sinter/
          password: ${{ secrets.pypi_token_sinter }}
  run_main:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v1
    - run: cmake .
    - run: make stim -j 2
    - run: echo -e "H 0 \n CNOT 0 1 \n M 0 1" | out/stim --sample
  build_bazel:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v1
    - uses: bazel-contrib/setup-bazel@0.8.5
      bazelisk-cache: true
      disk-cache: ${{ github.workflow }}
      repository-cache: true
      bazelisk-version: 1.x
    - run: bazel build :all
    - run: bazel test :stim_test
  build_clang:
    runs-on: ubuntu-20.04
    steps:
    - uses: actions/checkout@v1
    - run: |
        cd ..
        git clone https://github.com/google/googletest.git -b release-1.12.1
        mkdir googletest/build && cd googletest/build
        cmake .. -DBUILD_GMOCK=OFF
        make
        sudo make install
    - uses: egor-tensin/setup-clang@v1
      with:
        version: latest
        platform: x64
    - run: cmake . -DCMAKE_C_COMPILER=cc -DCMAKE_CXX_COMPILER=c++
    - run: cmake --build .
  build_lib:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v1
    - run: cmake .
    - run: make libstim -j 2
    - run: echo -e '#include "stim.h"\nint main(int argc,const char **argv) {return !stim::find_bool_argument("test", argc, argv);}' > test.cc
    - run: g++ -std=c++20 test.cc out/libstim.a -I src
    - run: ./a.out test
  build_lib_install:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v1
    - run: mkdir install_dir
    - run: cmake . -DCMAKE_INSTALL_PREFIX=install_dir
    - run: make -j 2
    - run: make install
    - run: echo -e '#include "stim.h"\nint main(int argc,const char **argv) {return !stim::find_bool_argument("test", argc, argv);}' > test.cc
    - run: g++ -std=c++20 test.cc install_dir/lib/libstim.a -I install_dir/include
    - run: ./a.out test
    - run: echo -e "H 0 \n CNOT 0 1 \n M 0 1" | install_dir/bin/stim --sample
  benchmark_windows:
    runs-on: windows-latest
    steps:
      - uses: actions/checkout@v1
      - uses: microsoft/setup-msbuild@v1.0.2
      - run: cmake .
      - run: MSBuild.exe stim_perf.vcxproj /p:Configuration=Release /p:OutDir=msbuild_out /p:O=2
      - run: msbuild_out/stim_perf.exe
  benchmark:
    runs-on: ubuntu-latest
    strategy:
      matrix:
        simd_width: [64, 128, 256]
    steps:
    - uses: actions/checkout@v1
    - run: cmake . -DSIMD_WIDTH=${{ matrix.simd_width }}
    - run: make stim_perf -j 2
    - run: out/stim_perf
  test:
    runs-on: ubuntu-latest
    strategy:
      matrix:
        simd_width: [64, 128, 256]
    steps:
    - uses: actions/checkout@v1
    - run: |
        cd ..
        git clone https://github.com/google/googletest.git -b release-1.12.1
        mkdir googletest/build && cd googletest/build
        cmake .. -DBUILD_GMOCK=OFF
        make
        sudo make install
    - run: cmake . -DSIMD_WIDTH=${{ matrix.simd_width }}
    - run: make stim_test -j 2
    - run: out/stim_test
  test_o3:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v1
    - run: |
        cd ..
        git clone https://github.com/google/googletest.git -b release-1.12.1
        mkdir googletest/build && cd googletest/build
        cmake .. -DBUILD_GMOCK=OFF
        make
        sudo make install
    - run: cmake . -DSIMD_WIDTH=256
    - run: make stim_test_o3 -j 2
    - run: out/stim_test_o3
  test_generated_docs_are_fresh:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v3
      - uses: actions/setup-python@v3
      - uses: bazel-contrib/setup-bazel@0.8.5
        bazelisk-cache: true
        disk-cache: ${{ github.workflow }}
        repository-cache: true
        bazelisk-version: 1.x
      - uses: actions/setup-node@v1
        with:
          node-version: 16.x
      - run: bazel build :stim_dev_wheel
      - run: pip install bazel-bin/stim-0.0.dev0-py3-none-any.whl
      - run: diff <(python dev/gen_stim_api_reference.py -dev) doc/python_api_reference_vDev.md
      - run: diff <(python dev/gen_stim_stub_file.py -dev) glue/python/src/stim/__init__.pyi
      - run: diff <(python dev/gen_stim_stub_file.py -dev) doc/stim.pyi
      - run: diff <(python -c "import stim; stim.main(command_line_args=['help', 'gates_markdown'])") doc/gates.md
      - run: diff <(python -c "import stim; stim.main(command_line_args=['help', 'formats_markdown'])") doc/result_formats.md
      - run: diff <(python -c "import stim; stim.main(command_line_args=['help', 'commands_markdown'])") doc/usage_command_line.md
      - run: diff <(dev/gen_known_gates_for_js.sh) glue/crumble/test/generated_gate_name_list.test.js
      - run: python doc/stim.pyi
      - run: npm install -g rollup@3.21.2 uglify-js@3.17.4
      - run: diff <(dev/compile_crumble_into_cpp_string_file.sh) src/stim/diagram/crumble_data.cc
      - run: pip install -e glue/sample
      - run: diff <(python dev/gen_sinter_api_reference.py -dev) doc/sinter_api.md
  test_generated_file_lists_are_fresh:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v3
      - run: dev/regen_file_lists.sh /tmp
      - run: diff /tmp/perf_files file_lists/perf_files
      - run: diff /tmp/pybind_files file_lists/pybind_files
      - run: diff /tmp/source_files_no_main file_lists/source_files_no_main
      - run: diff /tmp/test_files file_lists/test_files
  test_pybind:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v3
      - uses: actions/setup-python@v3
      - uses: bazel-contrib/setup-bazel@0.8.5
        bazelisk-cache: true
        disk-cache: ${{ github.workflow }}
        repository-cache: true
        bazelisk-version: 1.x
      - run: bazel build :stim_dev_wheel
      - run: pip install bazel-bin/stim-0.0.dev0-py3-none-any.whl
      - run: pip install pytest
      - run: pytest src
      - run: dev/doctest_proper.py --module stim
  test_stimcirq:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v3
      - uses: actions/setup-python@v3
      - uses: bazel-contrib/setup-bazel@0.8.5
        bazelisk-cache: true
        disk-cache: ${{ github.workflow }}
        repository-cache: true
        bazelisk-version: 1.x
      - run: bazel build :stim_dev_wheel
      - run: pip install bazel-bin/stim-0.0.dev0-py3-none-any.whl
      - run: pip install -e glue/cirq
      - run: pip install pytest
      - run: pytest glue/cirq
      - run: dev/doctest_proper.py --module stimcirq --import cirq sympy
  test_sinter:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v3
      - uses: actions/setup-python@v3
      - uses: bazel-contrib/setup-bazel@0.8.5
        bazelisk-cache: true
        disk-cache: ${{ github.workflow }}
        repository-cache: true
        bazelisk-version: 1.x
      - run: bazel build :stim_dev_wheel
      - run: pip install bazel-bin/stim-0.0.dev0-py3-none-any.whl
      - run: pip install -e glue/sample
      - run: pip install pytest pymatching fusion-blossom~=0.1.4
      - run: pytest glue/sample
      - run: dev/doctest_proper.py --module sinter
      - run: sinter help
  test_stimzx:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v3
      - uses: actions/setup-python@v3
      - uses: bazel-contrib/setup-bazel@0.8.5
        bazelisk-cache: true
        disk-cache: ${{ github.workflow }}
        repository-cache: true
        bazelisk-version: 1.x
      - run: bazel build :stim_dev_wheel
      - run: pip install bazel-bin/stim-0.0.dev0-py3-none-any.whl
      - run: pip install -e glue/zx
      - run: pip install pytest
      - run: pytest glue/zx
      - run: dev/doctest_proper.py --module stimzx
  test_stimjs:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v3
      - uses: mymindstorm/setup-emsdk@v14
        with:
          version: 2.0.18
          actions-cache-folder: 'emsdk-cache'
      - uses: actions/setup-node@v1
        with:
          node-version: 16.x
      - run: npm install
      - run: bash glue/javascript/build_wasm.sh
      - run: node puppeteer_run_tests.js
  test_crumble:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v3
    - uses: actions/setup-node@v3
      with:
        node-version: 16
    - run: node glue/crumble/run_tests_headless.js