CHANGELOG.md

Change Log

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog and this project adheres to Semantic Versioning.

[0.6.1]

Changed

• @Moral-ecomo: Fixed issue where unsecure hook was unbounded due to not being bound to the class instance.

[0.6.0]

Added

• @hkpeprah: Added 'rtt_get_buf_descriptor()', and 'rtt_get_status()' with associated structures for describing an RTT buffer, and the status of an RTT control block.

Changed

• @hkpeprah: Changed 'rtt_start()' to take optional block address to specify where RTT block starts.

[0.5.0]

Changed

• @rjshade: Changed .open() and .close() to operate using a reference count; DLL is now only closed if open reference count is zero.

[0.4.0]

Added

• @sauci: Added CP15 API: cp15_present, cp15_register_read, and cp15_register_write.

[0.3.0]

Changed

• @charliebruce: Fix for 'VTarget' in hardware status; incorrectly assigned to 32-bit instead of 16-bit integer.
• @charliebruce: Fix for documentation for 'VTarget' in hardware status; incorrectly displayed mA instead of mV.
• @sauci: Changed register methods ('register_read()', 'register_read_multiple()', 'register_write()', and 'register_write_multiple()') to alternatively take regsiter names instead of just register indices.

[0.2.0]

Added

• @bojanpotocnik: Implemented context manager to enable automatic debugger connection opening when context is entered, and connection closed when exited.

Changed

• @bojanpotocnik: Implemented finalizer method '_finalize()' to tear down connection on destructor.

[0.1.3]

Changed

• @michalfita: Fixed handling for DLL in 64-bit Python instances: on 64-bit Windows platforms running 64-bit Python, the 32-bit DLL was always being loaded; now the 64-bit DLL will be loaded instead.

[0.1.2]

Changed

• @wallacbe: Removed sleep after connect; no-op issued to make sure the target is ready for debugging.

[0.1.1]

Changed

• @ford: async decorator renamed to async_decorator to support new linting rules in Python3.

Added

• @ford: Added missing six requirement to setup.py and requirements.txt.
• @Sauci: Added open_tunnel() method to connect to a J-Link over the remote server.

[0.1.0]

Changed

• @charlesnicholson: flash commands no longer default to powering on the target.

[0.0.10]

Changed

• @MarekNovakNXP: Fixed casting of swd_read32 to properly handle reading 32-bit register when MSB is set.
• @sstallion: Fixed casting of swd_read8, and swd_read16 to properly handle reading 32-bit register when MSB is set.

[0.0.9]

Changed

• @charlesnicholson: fixed non-deterministic crash on Linux when unloading DLL.

[0.0.8]

Changed

• @eldonrivers: added support for 'nxp' name for kinetis/freescale chips

[0.0.7]

Added

• @charlesnicholson: Added support for for RTT.
  • rtt_stop
  • rtt_read
  • rtt_write
  • rtt_get_num_up_buffers
  • rtt_get_num_down_buffers
  • rtt_control

[0.0.6]

Changed

• Cleaned up documentation.
• Linted code.

[0.0.5]

Changed

• Fixed os.path.isfile typo.

[0.0.4]

Changed

• When loading the SEGGER lib on Linux, os.walk is used to descend recursively through the directory tree.

[0.0.3]

Added

• API Functions
  • set_trace_source
  • set_etb_trace
  • set_etm_trace
• ETM
  • etm_supported
  • etm_register_read
  • etm_register_write
• Simple Trace API
  • strace_configure
  • strace_start
  • strace_stop
  • strace_read
  • strace_code_fetch_event
  • strace_data_access_event
  • strace_data_load_event
  • strace_data_store_event
  • strace_clear
  • strace_clear_all
  • strace_set_buffer_size
  • Example application for simple trace API under examples/strace.py.
• Trace API
  • trace_start
  • trace_stop
  • trace_flush
  • trace_sample_count
  • trace_buffer_size
  • trace_set_buffer_size
  • trace_min_buffer_size
  • trace_max_buffer_size
  • trace_set_format
  • trace_format
  • trace_region_count
  • trace_region
  • trace_read

Changed

• Serial number no longer required command-line argument for command-line tool; if not specified, selects the first emulator.
• Fixed bug in Linux library load where 32-bit DLL was loaded on 64-bit platform.

[0.0.2]

Added

• Support added for writing to flash outside of flashing firmware:
  • flash_write
  • flash_write8
  • flash_write16
  • flash_write32
• Added unlock method for unlocking a device connected to a J-Link instance.

Changed

• Fixed logic for determine if J-Link is halted; SDK documentation implies that return value for JLINKARM_IsHalted() is <= 1, but example on Page 144 suggests otherwise; .halted() changed to reflect examples suggestion.
• Fixed logic in .exec_command(). Since the J-Link SDK does not conform to the standard of returning zero only in cases of error, JLINKARM_ExecCommand may succeed, but still return a non-zero value. Checking the error string is the best way to handle this, and the return value should be ignored.
• Fixed logic in handling the return value of JLINKARM_Connect(), JLINKARM_Connect() can return with a positive value which still indicates success.

[0.0.1d]

Changed

• open() with serial_no=None and ip_addr=None will connect to the first USB device. This permits operation without having to define serial numbers for workflows using one emulator.

[0.0.1c]

Changed

• reset() with halt=False would previously cause a mass erase of the device as it used JLINKARM_ResetNoHalt(); now uses JLINKARM_Reset() followed by a call to JLINKARM_Go(), and does not trigger a mass erase if the device is secure.

[0.0.1b]

Added

• sync_firmware

Changed

• Added a minimum version decorator to wrap functions that require at least a certain version of the J-Link software in order to be used.
• Removed 'open_required()' for 'exec_command()', 'disable_dialog_boxes()', and 'enable_dialog_boxes()'.
• Added a sample script for automated updates on Windows platforms.

[0.0.1a]

Added

• General API Functions (88%):
  • opened
  • connected
  • target_connected
  • num_connected_emulators
  • connected_emulators
  • num_supported_devices
  • supported_devices
  • open
  • close
  • exec_command
  • connect
  • error
  • clear_error
  • compile_date
  • version
  • hardware_info
  • hardware_status
  • hardware_version
  • firmware_version
  • capabilities
  • extended_capabilities
  • extended_capability
  • features
  • product_name
  • serial_number
  • oem
  • index
  • speed
  • set_speed
  • set_max_speed
  • speed_info
  • tif
  • supported_tifs
  • set_tif
  • gpio_properties
  • gpio_get
  • gpio_set
  • comm_supported
  • cpu_capability
  • power_on
  • power_off
  • set_reset_strategy
  • set_reset_pin_high
  • set_reset_pin_low
  • set_tck_pin_high
  • set_tck_pin_low
  • set_tdi_pin_high
  • set_tdi_pin_low
  • set_tms_pin_high
  • set_tms_pin_low
  • set_trst_pin_high
  • set_trst_pin_low
  • erase
  • flash
  • flash_file
  • reset
  • reset_tap
  • restart
  • halt
  • halted
  • core_id
  • core_cpu
  • core_name
  • ir_len
  • scan_len
  • scan_chain_len
  • device_family
  • cpu_speed
  • cpu_halt_reasons
  • enable_reset_pulls_reset
  • disable_reset_pulls_reset
  • enable_reset_pulls_trst
  • disable_reset_pulls_trst
  • enable_reset_inits_registers
  • disable_reset_inits_registers
  • set_little_endian
  • set_big_endian
  • set_vector_catch
  • step
  • enable_soft_breakpoints
  • disable_soft_breakpoints
  • num_active_breakpoints
  • num_available_breakpoints
  • breakpoint_info
  • breakpoint_find
  • breakpoint_set
  • software_breakpoint_set
  • hardware_breakpoint_set
  • breakpoint_clear
  • breakpoint_clear_all
  • num_active_watchpoints
  • num_available_watchpoints
  • watchpoint_info
  • watchpoint_set
  • watchpoint_clear
  • watchpoint_clear_all
• Automation Utilities:
  • enable_dialog_boxes
  • disable_dialog_boxes
• JTAG API Functions:
  • jtag_configure
  • jtag_create_clock
  • jtag_flush
  • jtag_send
• License API:
  • licenses
  • custom_license
  • add_license
  • erase_licenses
• Firmware API:
  • invalidate_firmware
  • update_firmware
  • firmware_newer
  • firmware_outdated
• Logging Handlers:
  • log_handler
  • detailed_log_handler
  • error_handler
  • warning_handler
• Coresight API:
  • coresight_configure
  • coresight_read
  • coresight_write
• SWD API:
  • swd_read8
  • swd_read16
  • swd_read32
  • swd_write
  • swd_write8
  • swd_write16
  • swd_write32
  • swd_sync
• SWO API:
  • swo_start
  • swo_stop
  • swo_enabled
  • swo_enable
  • swo_disable
  • swo_flush
  • swo_speed_info
  • swo_num_bytes
  • swo_set_host_buffer_size
  • swo_set_emu_buffer_size
  • swo_supported_speeds
  • swo_read
  • swo_read_stimulus
• Memory API Functions:
  • memory_read
  • memory_write
  • memory_read8
  • memory_write8
  • memory_read16
  • memory_write16
  • memory_read32
  • memory_write32
  • memory_read64
  • memory_write64
  • num_memory_zones
  • memory_zones
  • code_memory_read
• Register API Functions:
  • register_read
  • register_write
  • register_read_multiple
  • register_write_multiple
  • register_list
  • register_name
• ICE Register API Functions:
  • ice_register_read
  • ice_register_write
• Added PyLink command-line tool:
  • Flash command added.
  • Unlock command added.
  • License command added.
  • Erase command added.
• Added support for accessing the multiple J-Links from the same process.
• Added device lockfiles to prevent multiple accesses to the same J-Link when a thread is already accessing that J-Link.
• Example "Serial Wire Viewer (SWV)" added.
• Example "Core Information Query (CIQ)" added.
• Example "Target Endianness (TE)" added.