We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
I am using respeaker 4 mic array successfully installed the driver
i2cdetect -y 1 gives:
pi@raspberrypi:~ $ i2cdetect -y 1 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- UU -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- --
arecord -L gives: pi@raspberrypi:~ $ arecord -L null Discard all samples (playback) or generate zero samples (capture) default playback ac108 sysdefault:CARD=seeed4micvoicec seeed-4mic-voicecard, Default Audio Device dmix:CARD=seeed4micvoicec,DEV=0 seeed-4mic-voicecard, Direct sample mixing device dsnoop:CARD=seeed4micvoicec,DEV=0 seeed-4mic-voicecard, Direct sample snooping device hw:CARD=seeed4micvoicec,DEV=0 seeed-4mic-voicecard, Direct hardware device without any conversions plughw:CARD=seeed4micvoicec,DEV=0 seeed-4mic-voicecard, Hardware device with all software conversions
pi@raspberrypi:~ $ arecord -L null Discard all samples (playback) or generate zero samples (capture) default playback ac108 sysdefault:CARD=seeed4micvoicec seeed-4mic-voicecard, Default Audio Device dmix:CARD=seeed4micvoicec,DEV=0 seeed-4mic-voicecard, Direct sample mixing device dsnoop:CARD=seeed4micvoicec,DEV=0 seeed-4mic-voicecard, Direct sample snooping device hw:CARD=seeed4micvoicec,DEV=0 seeed-4mic-voicecard, Direct hardware device without any conversions plughw:CARD=seeed4micvoicec,DEV=0 seeed-4mic-voicecard, Hardware device with all software conversions
but when I try running arecord -Dac108 -f S32_LE -r 16000 -c 4 hello.wav
arecord -Dac108 -f S32_LE -r 16000 -c 4 hello.wav
I get
pi@raspberrypi:~ $ arecord -Dac108 -f S32_LE -r 16000 -c 4 hello.wav Recording WAVE 'hello.wav' : Signed 32 bit Little Endian, Rate 16000 Hz, Channels 4 arecord: pcm_read:2103: read error: Input/output error
please help!!
The text was updated successfully, but these errors were encountered:
Pillar1989
No branches or pull requests
I am using respeaker 4 mic array
successfully installed the driver
i2cdetect -y 1 gives:
pi@raspberrypi:~ $ i2cdetect -y 1 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- UU -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- --
arecord -L gives:
pi@raspberrypi:~ $ arecord -L null Discard all samples (playback) or generate zero samples (capture) default playback ac108 sysdefault:CARD=seeed4micvoicec seeed-4mic-voicecard, Default Audio Device dmix:CARD=seeed4micvoicec,DEV=0 seeed-4mic-voicecard, Direct sample mixing device dsnoop:CARD=seeed4micvoicec,DEV=0 seeed-4mic-voicecard, Direct sample snooping device hw:CARD=seeed4micvoicec,DEV=0 seeed-4mic-voicecard, Direct hardware device without any conversions plughw:CARD=seeed4micvoicec,DEV=0 seeed-4mic-voicecard, Hardware device with all software conversions
but when I try running
arecord -Dac108 -f S32_LE -r 16000 -c 4 hello.wav
I get
pi@raspberrypi:~ $ arecord -Dac108 -f S32_LE -r 16000 -c 4 hello.wav Recording WAVE 'hello.wav' : Signed 32 bit Little Endian, Rate 16000 Hz, Channels 4 arecord: pcm_read:2103: read error: Input/output error
please help!!
The text was updated successfully, but these errors were encountered: