HoymilesZeroExport_Config.ini

# HoymilesZeroExport - https://github.com/reserve85/HoymilesZeroExport
# Copyright (C) 2023, Tobias Kraft

# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# ---------------------------------------------------------------------
# --- DO NOT DELETE ANY ENTRIES HERE - else your script won't start ---
# ---------------------------------------------------------------------

[VERSION]
VERSION = 1.87

[SELECT_DTU]
# --- define your DTU (only one) ---
USE_AHOY = false
USE_OPENDTU = false

[SELECT_POWERMETER]
# --- define your Powermeter (only one) ---
USE_TASMOTA = false
USE_SHELLY_EM = false
USE_SHELLY_3EM = false
USE_SHELLY_3EM_PRO = false
USE_SHRDZM = false
USE_EMLOG = false
USE_IOBROKER = false
USE_HOMEASSISTANT = false
USE_VZLOGGER = false
USE_SCRIPT = false

[AHOY_DTU]
# --- defines for AHOY-DTU ---
# in settings/inverter set interval to 6 seconds!
AHOY_IP = xxx.xxx.xxx.xxx
AHOY_PASS =

[OPEN_DTU]
# --- defines for OPEN-DTU ---
OPENDTU_IP = xxx.xxx.xxx.xxx
OPENDTU_USER = 
OPENDTU_PASS = 

[TASMOTA]
# --- defines for Tasmota Smartmeter Modul---
TASMOTA_IP = xxx.xxx.xxx.xxx
# the following three constants describes how to navigate through the Tasmota-JSON. 
# if you do not know the format of your Tasmota reader, open a browser and put in the following string replacing xxx with the IP address of your Tasmota device: http://xxx.xxx.xxx.xxx/cm?cmnd=status%2010
# e.g. JSON_Result = {"StatusSNS":{"Time":"2023-02-28T12:49:49","SML":{"total_kwh":15011.575,"curr_w":-71}}}
TASMOTA_JSON_STATUS = StatusSNS
# Prefix for Web UI and MQTT JSON payload
TASMOTA_JSON_PAYLOAD_MQTT_PREFIX = SML
# Power-MQTT label (the current power in Watt, positive (import more energy than export) or negative (export more energy than import)).
TASMOTA_JSON_POWER_MQTT_LABEL = curr_w
# if your powermeter does NOT output the current power: you need to calculate it -> Power(W) = OBIS(1.7.0) - OBIS(2.7.0)
TASMOTA_JSON_POWER_CALCULATE = FALSE
# Power-MQTT Input label (positive active instantaneous power, e.g. OBIS Code 1.7.0)
TASMOTA_JSON_POWER_INPUT_MQTT_LABEL =
# Power-MQTT output label (negative active instantaneous power, e.g. OBIS Code 2.7.0)
TASMOTA_JSON_POWER_OUTPUT_MQTT_LABEL =

[SHELLY]
# --- defines for Shelly ---
SHELLY_IP = xxx.xxx.xxx.xxx
# if you restricted the web login enter your username and password, for Shelly "Generation 2" devices the username is always "admin" (e.g. Shelly pro 3EM)
SHELLY_USER =
SHELLY_PASS =

[SHRDZM]
# --- defines for SHRDZM Smartmeter Modul ---
SHRDZM_IP = xxx.xxx.xxx.xxx
SHRDZM_USER =
SHRDZM_PASS =

[EMLOG]
# --- defines for EMLOG (electronic meter log) System ---
EMLOG_IP = xxx.xxx.xxx.xxx
EMLOG_METERINDEX = 
# if your powermeter does NOT output the current power: you need to calculate it -> Power(W) = OBIS(1.7.0) - OBIS(2.7.0)
EMLOG_JSON_POWER_CALCULATE = TRUE

[IOBROKER]
# --- defines for IOBROKER (make sure you installed https://github.com/ioBroker/ioBroker.simple-api) ---
IOBROKER_IP = xxx.xxx.xxx.xxx
IOBROKER_PORT = 8087
IOBROKER_CURRENT_POWER_ALIAS = alias.0.Zaehler.Zaehler_CurrentWatt
# if your powermeter does NOT output the current power: you need to calculate it -> Power(W) = OBIS(1.7.0) - OBIS(2.7.0)
IOBROKER_POWER_CALCULATE = FALSE
# Power-MQTT Input label (positive active instantaneous power, e.g. OBIS Code 1.7.0)
IOBROKER_POWER_INPUT_ALIAS = alias.0.Zaehler.Zaehler_CurrentInputWatt
# Power-MQTT output label (negative active instantaneous power, e.g. OBIS Code 2.7.0)
IOBROKER_POWER_OUTPUT_ALIAS = alias.0.Zaehler.Zaehler_CurrentOutputWatt

[HOMEASSISTANT]
# --- defines for HOME ASSISTANT ---
HA_IP = xxx.xxx.xxx.xxx
HA_PORT = 8123
# you need to create a Long-Lived Access Token in your Home Assistant: click on your profile, then scroll down to the bottom
HA_ACCESSTOKEN = xxx
HA_CURRENT_POWER_ENTITY = sensor.dtz541_sml_curr_w
# if your powermeter does NOT output the current power: you need to calculate it -> Power(W) = OBIS(1.7.0) - OBIS(2.7.0)
HA_POWER_CALCULATE = FALSE
# Power-MQTT Input label (positive active instantaneous power, e.g. OBIS Code 1.7.0)
HA_POWER_INPUT_ALIAS = sensor.dtz541_sml_170
# Power-MQTT output label (negative active instantaneous power, e.g. OBIS Code 2.7.0)
HA_POWER_OUTPUT_ALIAS = sensor.dtz541_sml_270

[VZLOGGER]
# --- defines for VZLOGGER (local http API https://wiki.volkszaehler.org/software/controller/vzlogger/vzlogger_conf_parameter#local) ---
VZL_IP = 127.0.0.1
VZL_PORT = 2081
# you need to specify the uuid of the vzlogger channel for the reading OBIS(16.7.0) (aktuelle Gesamtwirkleistung)
VZL_UUID = 30c6c501-9a3c-4b0f-bda5-1d1769904463

[SCRIPT]
# --- defines for Shell Script Smartmeter Modul ---
SCRIPT_IP = xxx.xxx.xxx.xx
SCRIPT_FILE = GetPowerFromVictronMultiplus.sh
SCRIPT_USER =
SCRIPT_PASS =

[SELECT_INTERMEDIATE_METER]
# if you have an intermediate meter ("Zwischenzähler") to measure the outputpower of your inverter you can set it here. It is faster than the DTU current_power value
# --- define your intermediate meter - if you don´t have one set the following defines to false to use the value from your DTU---
USE_TASMOTA_INTERMEDIATE = false
USE_SHELLY_EM_INTERMEDIATE = false
USE_SHELLY_3EM_INTERMEDIATE = false
USE_SHELLY_3EM_PRO_INTERMEDIATE = false
USE_SHELLY_1PM_INTERMEDIATE = false
USE_SHELLY_PLUS_1PM_INTERMEDIATE = false
USE_ESPHOME_INTERMEDIATE = false
USE_SHRDZM_INTERMEDIATE = false
USE_EMLOG_INTERMEDIATE = false
USE_IOBROKER_INTERMEDIATE = false
USE_HOMEASSISTANT_INTERMEDIATE = false
USE_VZLOGGER_INTERMEDIATE = false

[INTERMEDIATE_TASMOTA]
# --- defines for Tasmota Smartmeter Modul---
TASMOTA_IP_INTERMEDIATE = xxx.xxx.xxx.xxx 
# the following three constants describes how to navigate through the Tasmota-JSON
# e.g. JSON_Result = {"StatusSNS":{"Time":"2023-02-28T12:49:49","SML":{"curr_w":500}}}
TASMOTA_JSON_STATUS_INTERMEDIATE = StatusSNS
# Prefix for Web UI and MQTT JSON payload
TASMOTA_JSON_PAYLOAD_MQTT_PREFIX_INTERMEDIATE = SML
# Power-MQTT label (the current solar-power in Watt).
TASMOTA_JSON_POWER_MQTT_LABEL_INTERMEDIATE = curr_w

[INTERMEDIATE_SHELLY]
# --- defines for Shelly ---
SHELLY_IP_INTERMEDIATE = xxx.xxx.xxx.xxx
# if you restricted the web login enter your username and password, for Shelly "Generation 2" devices the username is always "admin" (e.g. Shelly pro 3EM)
SHELLY_USER_INTERMEDIATE =
SHELLY_PASS_INTERMEDIATE =

[INTERMEDIATE_ESPHOME]
ESPHOME_IP_INTERMEDIATE = xxx.xxx.xxx.xxx
ESPHOME_PORT_INTERMEDIATE = 80
ESPHOME_DOMAIN_INTERMEDIATE =
ESPHOME_ID_INTERMEDIATE =

[INTERMEDIATE_SHRDZM]
# --- defines for SHRDZM Smartmeter Modul ---
SHRDZM_IP_INTERMEDIATE = xxx.xxx.xxx.xxx
SHRDZM_USER_INTERMEDIATE =
SHRDZM_PASS_INTERMEDIATE =

[INTERMEDIATE_EMLOG]
# --- defines for EMLOG (electronic meter log) System ---
EMLOG_IP_INTERMEDIATE = xxx.xxx.xxx.xxx
EMLOG_METERINDEX_INTERMEDIATE = 

[INTERMEDIATE_IOBROKER]
# --- defines for IOBROKER (needs installed https://github.com/ioBroker/ioBroker.simple-api) ---
IOBROKER_IP_INTERMEDIATE = xxx.xxx.xxx.xxx
IOBROKER_PORT_INTERMEDIATE = 8087
IOBROKER_CURRENT_POWER_ALIAS_INTERMEDIATE = alias.0.Zaehler.Zaehler_SolarCurrentWatt

[INTERMEDIATE_HOMEASSISTANT]
# --- defines for HOME ASSISTANT (you need to create a Long-Lived Access Token in your profile) ---
HA_IP_INTERMEDIATE = xxx.xxx.xxx.xxx
HA_PORT_INTERMEDIATE = 8123
HA_ACCESSTOKEN_INTERMEDIATE = xxx
HA_CURRENT_POWER_ENTITY_INTERMEDIATE = sensor.dtz541_sml_curr_w

[INTERMEDIATE_VZLOGGER]
# --- defines for VZLOGGER (local http API https://wiki.volkszaehler.org/software/controller/vzlogger/vzlogger_conf_parameter#local) ---
VZL_IP_INTERMEDIATE = 127.0.0.1
VZL_PORT_INTERMEDIATE = 2081
# you need to specify the uuid of the vzlogger channel for the reading OBIS(16.7.0) (aktuelle Gesamtwirkleistung)
VZL_UUID_INTERMEDIATE = 06ec9562-a490-49fe-92ea-ffe0758d181c

# Uncomment the following section if you want to use MQTT to dynamically reconfigure some settings while the script is running
# [MQTT_CONFIG]
# MQTT_BROKER = localhost
# MQTT_PORT = 1883
# MQTT_CLIENT_ID = HoymilesZeroExport

# The script subscribes to the following topics:
# - zeropower/set/powermeter_target_point: To change the target point of the powermeter
# - zeropower/set/powermeter_max_point: To change the max point of the powermeter
# - zeropower/set/powermeter_tolerance: To change the tolerance of the powermeter
# - zeropower/set/on_grid_usage_jump_to_limit_percent: To change the on grid usage jump to limit percent
# - zeropower/set/inverter/0/min_watt_in_percent: To change the min watt in percent of the first inverter
# - zeropower/set/inverter/0/normal_watt: To change the battery normal watt of the first inverter
# - zeropower/set/inverter/0/reduce_watt: To change the battery reduce watt of the first inverter
# - zeropower/set/inverter/0/battery_priority: To change the battery priority of the first inverter
# MQTT_SET_TOPIC = zeropower/set
# MQTT_RESET_TOPIC = zeropower/reset

[COMMON]
# Number of Inverters
INVERTER_COUNT = 1
# max difference in percent between SetpointLimit change to approximate the power to new setpoint
SLOW_APPROX_LIMIT_IN_PERCENT = 20
# if slow approximation: additional limit based on the limit-difference to "smoot the curve": newLimitSetpoint = newLimitSetpoint + (LimitDifference * SLOW_APPROX_FACTOR_IN_PERCENT / 100)
SLOW_APPROX_FACTOR_IN_PERCENT = 20
# interval time for setting limit to Hoymiles
LOOP_INTERVAL_IN_SECONDS = 20
# Timeout time to wait for Acknowledge after sending limit to Hoymiles Inverter
SET_LIMIT_TIMEOUT_SECONDS = 10
# polling interval for powermeter (must be <= LOOP_INTERVAL_IN_SECONDS)
POLL_INTERVAL_IN_SECONDS = 1
# if your powermeter exceeds POWERMETER_MAX_POINT: immediatelly set the limit to predefined percent of HOY_MAX_WATT (if you have more than one inverter it´s the sum of all HOY_MAX_WATT)
# value = 0 disables the feature. Values are possible from [0 to 100]
ON_GRID_USAGE_JUMP_TO_LIMIT_PERCENT = 100
# max difference between Limit and real output power in % of HOY_MAX_WATT (100 = disabled)
MAX_DIFFERENCE_BETWEEN_LIMIT_AND_OUTPUTPOWER = 100
# enable logging to file
ENABLE_LOG_TO_FILE = false
# how many logfiles you wish to keep
LOG_BACKUP_COUNT = 30
# defines how often the Inverter Power Status will be set, set it to "-1" for disabled (infinite repeat)
SET_POWERSTATUS_CNT = 10
# log the inverter temperature
LOG_TEMPERATURE = false
# delay time after turning the inverter off or on
SET_POWER_STATUS_DELAY_IN_SECONDS = 10
# define if you want to set your inverter to min-limit when your powermeter can't be read out
SET_INVERTER_TO_MIN_ON_POWERMETER_ERROR = false

[CONTROL]
# --- global defines for control behaviour ---
# POWERMETER_TARGET_POINT is the target power for powermeter in watts
POWERMETER_TARGET_POINT = -75
# POWERMETER_TOLERANCE is the tolerance (pos and neg) around the target point. in this range no adjustment will be set
POWERMETER_TOLERANCE = 25
# POWERMETER_MAX_POINT is the maximum power of your powermeter for the normal "regulation loop".
# if your powermeter jumps over this point, the limit will be increased instantly. it is like a "super high priority limit change".
# if you defined ON_GRID_USAGE_JUMP_TO_LIMIT_PERCENT > 0, then the limit will jump to the defined percent when reaching this point.
POWERMETER_MAX_POINT = 0

# List of INVERTERS, based on COMMON/COUNT
[INVERTER_1]
# serial number of your inverter, if empty it is automatically read out of the API. If you have more than one inverter you should define the serial number here (prevents mix-up).
SERIAL_NUMBER = 
# manufacturer power rating of your inverter.
HOY_INVERTER_WATT = 
# max. power output of your inverter (e.g. if you have a 1500W Inverter and you only want to output max. 1000W)
HOY_MAX_WATT = 1500
# minimum limit in percent, e.g. 5% of your inverter power rating
HOY_MIN_WATT_IN_PERCENT = 5
# factor to multiply before set Limit. Some Inverters have some offsets, with that factor you can compensate it. Default = 1
HOY_COMPENSATE_WATT_FACTOR = 1
# battery powered?
HOY_BATTERY_MODE = false
# voltage to turn off the inverter
HOY_BATTERY_THRESHOLD_OFF_LIMIT_IN_V = 47
# voltage to limit the inverter to a maximum of HOY_BATTERY_REDUCE_WATT
HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V = 48
# voltage to limit the inverter to a maximum of HOY_BATTERY_NORMAL_WATT
HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V = 48.5
# maximum limit in watts when battery is high (above HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V)
HOY_BATTERY_NORMAL_WATT = 1500
# maximum limit in watts when battery is low (below HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V)
HOY_BATTERY_REDUCE_WATT = 300
# reenable inverter at this voltage
HOY_BATTERY_THRESHOLD_ON_LIMIT_IN_V = 51
# define which panels you want to ignore for the panel voltage. E.g. if you have input 1 + 2 battery powered and input 3 + 4 for solar panels you can disable panel 3 and 4.
# if you want to ignore Panel 3 and Panel 4 type: "HOY_BATTERY_IGNORE_PANELS = 3,4". leave it empty for no ignore.
HOY_BATTERY_IGNORE_PANELS = 
# define prioriry of the inverters (possible values: 1 (high) ... 5 (low); default = 1). same priorities are also possible. Not supported in mixed modes (a mix of solar and battery powered inverters)
# example 1 (default):
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 1: 
# set limit of 1100W -> inverter 1 is set to 733W and inverter 2 is set to 367W
# set limit of 300W -> inverter 1 is set to 200W and inverter 2 is set to 100W
# example 2:
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 2: 
# set limit of 1100W -> inverter 1 is set to 1000W and inverter 2 is set to 100W
# set limit of 300W -> inverter 1 is set to 300W and inverter 2 is powered off
HOY_BATTERY_PRIORITY = 1
# Number of measured values for the moving average of the min panel voltage
HOY_BATTERY_AVERAGE_CNT = 1

[INVERTER_2]
# serial number of your inverter, if empty it is automatically read out of the API. If you have more than one inverter you should define the serial number here (prevents mix-up).
SERIAL_NUMBER = 
# manufacturer power rating of your inverter.
HOY_INVERTER_WATT = 
# max. power output of your inverter (e.g. if you have a 1500W Inverter and you only want to output max. 1000W)
HOY_MAX_WATT = 1500
# minimum limit in percent, e.g. 5% of your inverter power rating
HOY_MIN_WATT_IN_PERCENT = 5
# factor to multiply before set Limit. Some Inverters have some offsets, with that factor you can compensate it. Default = 1
HOY_COMPENSATE_WATT_FACTOR = 1
# battery powered?
HOY_BATTERY_MODE = false
# voltage to turn off the inverter
HOY_BATTERY_THRESHOLD_OFF_LIMIT_IN_V = 47
# voltage to limit the inverter to a maximum of HOY_BATTERY_REDUCE_WATT
HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V = 48
# voltage to limit the inverter to a maximum of HOY_BATTERY_NORMAL_WATT
HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V = 48.5
# maximum limit in watts when battery is high (above HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V)
HOY_BATTERY_NORMAL_WATT = 1500
# maximum limit in watts when battery is low (below HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V)
HOY_BATTERY_REDUCE_WATT = 300
# reenable inverter at this voltage
HOY_BATTERY_THRESHOLD_ON_LIMIT_IN_V = 51
# define which panels you want to ignore for the panel voltage. E.g. if you have input 1 + 2 battery powered and input 3 + 4 for solar panels you can disable panel 3 and 4.
# if you want to ignore Panel 3 and Panel 4 type: "HOY_BATTERY_IGNORE_PANELS = 3,4". leave it empty for no ignore.
HOY_BATTERY_IGNORE_PANELS = 
# define prioriry of the inverters (possible values: 1 (high) ... 5 (low); default = 1). same priorities are also possible. Not supported in mixed modes (a mix of solar and battery powered inverters)
# example 1 (default):
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 1: 
# set limit of 1100W -> inverter 1 is set to 733W and inverter 2 is set to 367W
# set limit of 300W -> inverter 1 is set to 200W and inverter 2 is set to 100W
# example 2:
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 2: 
# set limit of 1100W -> inverter 1 is set to 1000W and inverter 2 is set to 100W
# set limit of 300W -> inverter 1 is set to 300W and inverter 2 is powered off
HOY_BATTERY_PRIORITY = 1
# Number of measured values for the moving average of the min panel voltage
HOY_BATTERY_AVERAGE_CNT = 1

[INVERTER_3]
# serial number of your inverter, if empty it is automatically read out of the API. If you have more than one inverter you should define the serial number here (prevents mix-up).
SERIAL_NUMBER = 
# manufacturer power rating of your inverter.
HOY_INVERTER_WATT = 
# max. power output of your inverter (e.g. if you have a 1500W Inverter and you only want to output max. 1000W)
HOY_MAX_WATT = 1500
# minimum limit in percent, e.g. 5% of your inverter power rating
HOY_MIN_WATT_IN_PERCENT = 5
# factor to multiply before set Limit. Some Inverters have some offsets, with that factor you can compensate it. Default = 1
HOY_COMPENSATE_WATT_FACTOR = 1
# battery powered?
HOY_BATTERY_MODE = false
# voltage to turn off the inverter
HOY_BATTERY_THRESHOLD_OFF_LIMIT_IN_V = 47
# voltage to limit the inverter to a maximum of HOY_BATTERY_REDUCE_WATT
HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V = 48
# voltage to limit the inverter to a maximum of HOY_BATTERY_NORMAL_WATT
HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V = 48.5
# maximum limit in watts when battery is high (above HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V)
HOY_BATTERY_NORMAL_WATT = 1500
# maximum limit in watts when battery is low (below HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V)
HOY_BATTERY_REDUCE_WATT = 300
# reenable inverter at this voltage
HOY_BATTERY_THRESHOLD_ON_LIMIT_IN_V = 51
# define which panels you want to ignore for the panel voltage. E.g. if you have input 1 + 2 battery powered and input 3 + 4 for solar panels you can disable panel 3 and 4.
# if you want to ignore Panel 3 and Panel 4 type: "HOY_BATTERY_IGNORE_PANELS = 3,4". leave it empty for no ignore.
HOY_BATTERY_IGNORE_PANELS = 
# define prioriry of the inverters (possible values: 1 (high) ... 5 (low); default = 1). same priorities are also possible. Not supported in mixed modes (a mix of solar and battery powered inverters)
# example 1 (default):
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 1: 
# set limit of 1100W -> inverter 1 is set to 733W and inverter 2 is set to 367W
# set limit of 300W -> inverter 1 is set to 200W and inverter 2 is set to 100W
# example 2:
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 2: 
# set limit of 1100W -> inverter 1 is set to 1000W and inverter 2 is set to 100W
# set limit of 300W -> inverter 1 is set to 300W and inverter 2 is powered off
HOY_BATTERY_PRIORITY = 1
# Number of measured values for the moving average of the min panel voltage
HOY_BATTERY_AVERAGE_CNT = 1

[INVERTER_4]
# serial number of your inverter, if empty it is automatically read out of the API. If you have more than one inverter you should define the serial number here (prevents mix-up).
SERIAL_NUMBER = 
# manufacturer power rating of your inverter.
HOY_INVERTER_WATT = 
# max. power output of your inverter (e.g. if you have a 1500W Inverter and you only want to output max. 1000W)
HOY_MAX_WATT = 1500
# minimum limit in percent, e.g. 5% of your inverter power rating
HOY_MIN_WATT_IN_PERCENT = 5
# factor to multiply before set Limit. Some Inverters have some offsets, with that factor you can compensate it. Default = 1
HOY_COMPENSATE_WATT_FACTOR = 1
# battery powered?
HOY_BATTERY_MODE = false
# voltage to turn off the inverter
HOY_BATTERY_THRESHOLD_OFF_LIMIT_IN_V = 47
# voltage to limit the inverter to a maximum of HOY_BATTERY_REDUCE_WATT
HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V = 48
# voltage to limit the inverter to a maximum of HOY_BATTERY_NORMAL_WATT
HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V = 48.5
# maximum limit in watts when battery is high (above HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V)
HOY_BATTERY_NORMAL_WATT = 1500
# maximum limit in watts when battery is low (below HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V)
HOY_BATTERY_REDUCE_WATT = 300
# reenable inverter at this voltage
HOY_BATTERY_THRESHOLD_ON_LIMIT_IN_V = 51
# define which panels you want to ignore for the panel voltage. E.g. if you have input 1 + 2 battery powered and input 3 + 4 for solar panels you can disable panel 3 and 4.
# if you want to ignore Panel 3 and Panel 4 type: "HOY_BATTERY_IGNORE_PANELS = 3,4". leave it empty for no ignore.
HOY_BATTERY_IGNORE_PANELS = 
# define prioriry of the inverters (possible values: 1 (high) ... 5 (low); default = 1). same priorities are also possible. Not supported in mixed modes (a mix of solar and battery powered inverters)
# example 1 (default):
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 1: 
# set limit of 1100W -> inverter 1 is set to 733W and inverter 2 is set to 367W
# set limit of 300W -> inverter 1 is set to 200W and inverter 2 is set to 100W
# example 2:
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 2: 
# set limit of 1100W -> inverter 1 is set to 1000W and inverter 2 is set to 100W
# set limit of 300W -> inverter 1 is set to 300W and inverter 2 is powered off
HOY_BATTERY_PRIORITY = 1
# Number of measured values for the moving average of the min panel voltage
HOY_BATTERY_AVERAGE_CNT = 1

[INVERTER_5]
# serial number of your inverter, if empty it is automatically read out of the API. If you have more than one inverter you should define the serial number here (prevents mix-up).
SERIAL_NUMBER = 
# manufacturer power rating of your inverter.
HOY_INVERTER_WATT = 
# max. power output of your inverter (e.g. if you have a 1500W Inverter and you only want to output max. 1000W)
HOY_MAX_WATT = 1500
# minimum limit in percent, e.g. 5% of your inverter power rating
HOY_MIN_WATT_IN_PERCENT = 5
# factor to multiply before set Limit. Some Inverters have some offsets, with that factor you can compensate it. Default = 1
HOY_COMPENSATE_WATT_FACTOR = 1
# battery powered?
HOY_BATTERY_MODE = false
# voltage to turn off the inverter
HOY_BATTERY_THRESHOLD_OFF_LIMIT_IN_V = 47
# voltage to limit the inverter to a maximum of HOY_BATTERY_REDUCE_WATT
HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V = 48
# voltage to limit the inverter to a maximum of HOY_BATTERY_NORMAL_WATT
HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V = 48.5
# maximum limit in watts when battery is high (above HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V)
HOY_BATTERY_NORMAL_WATT = 1500
# maximum limit in watts when battery is low (below HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V)
HOY_BATTERY_REDUCE_WATT = 300
# reenable inverter at this voltage
HOY_BATTERY_THRESHOLD_ON_LIMIT_IN_V = 51
# define which panels you want to ignore for the panel voltage. E.g. if you have input 1 + 2 battery powered and input 3 + 4 for solar panels you can disable panel 3 and 4.
# if you want to ignore Panel 3 and Panel 4 type: "HOY_BATTERY_IGNORE_PANELS = 3,4". leave it empty for no ignore.
HOY_BATTERY_IGNORE_PANELS = 
# define prioriry of the inverters (possible values: 1 (high) ... 5 (low); default = 1). same priorities are also possible. Not supported in mixed modes (a mix of solar and battery powered inverters)
# example 1 (default):
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 1: 
# set limit of 1100W -> inverter 1 is set to 733W and inverter 2 is set to 367W
# set limit of 300W -> inverter 1 is set to 200W and inverter 2 is set to 100W
# example 2:
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 2: 
# set limit of 1100W -> inverter 1 is set to 1000W and inverter 2 is set to 100W
# set limit of 300W -> inverter 1 is set to 300W and inverter 2 is powered off
HOY_BATTERY_PRIORITY = 1
# Number of measured values for the moving average of the min panel voltage
HOY_BATTERY_AVERAGE_CNT = 1

[INVERTER_6]
# serial number of your inverter, if empty it is automatically read out of the API. If you have more than one inverter you should define the serial number here (prevents mix-up).
SERIAL_NUMBER = 
# manufacturer power rating of your inverter.
HOY_INVERTER_WATT = 
# max. power output of your inverter (e.g. if you have a 1500W Inverter and you only want to output max. 1000W)
HOY_MAX_WATT = 1500
# minimum limit in percent, e.g. 5% of your inverter power rating
HOY_MIN_WATT_IN_PERCENT = 5
# factor to multiply before set Limit. Some Inverters have some offsets, with that factor you can compensate it. Default = 1
HOY_COMPENSATE_WATT_FACTOR = 1
# battery powered?
HOY_BATTERY_MODE = false
# voltage to turn off the inverter
HOY_BATTERY_THRESHOLD_OFF_LIMIT_IN_V = 47
# voltage to limit the inverter to a maximum of HOY_BATTERY_REDUCE_WATT
HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V = 48
# voltage to limit the inverter to a maximum of HOY_BATTERY_NORMAL_WATT
HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V = 48.5
# maximum limit in watts when battery is high (above HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V)
HOY_BATTERY_NORMAL_WATT = 1500
# maximum limit in watts when battery is low (below HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V)
HOY_BATTERY_REDUCE_WATT = 300
# reenable inverter at this voltage
HOY_BATTERY_THRESHOLD_ON_LIMIT_IN_V = 51
# define which panels you want to ignore for the panel voltage. E.g. if you have input 1 + 2 battery powered and input 3 + 4 for solar panels you can disable panel 3 and 4.
# if you want to ignore Panel 3 and Panel 4 type: "HOY_BATTERY_IGNORE_PANELS = 3,4". leave it empty for no ignore.
HOY_BATTERY_IGNORE_PANELS = 
# define prioriry of the inverters (possible values: 1 (high) ... 5 (low); default = 1). same priorities are also possible. Not supported in mixed modes (a mix of solar and battery powered inverters)
# example 1 (default):
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 1: 
# set limit of 1100W -> inverter 1 is set to 733W and inverter 2 is set to 367W
# set limit of 300W -> inverter 1 is set to 200W and inverter 2 is set to 100W
# example 2:
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 2: 
# set limit of 1100W -> inverter 1 is set to 1000W and inverter 2 is set to 100W
# set limit of 300W -> inverter 1 is set to 300W and inverter 2 is powered off
HOY_BATTERY_PRIORITY = 1
# Number of measured values for the moving average of the min panel voltage
HOY_BATTERY_AVERAGE_CNT = 1

[INVERTER_7]
# serial number of your inverter, if empty it is automatically read out of the API. If you have more than one inverter you should define the serial number here (prevents mix-up).
SERIAL_NUMBER = 
# manufacturer power rating of your inverter.
HOY_INVERTER_WATT = 
# max. power output of your inverter (e.g. if you have a 1500W Inverter and you only want to output max. 1000W)
HOY_MAX_WATT = 1500
# minimum limit in percent, e.g. 5% of your inverter power rating
HOY_MIN_WATT_IN_PERCENT = 5
# factor to multiply before set Limit. Some Inverters have some offsets, with that factor you can compensate it. Default = 1
HOY_COMPENSATE_WATT_FACTOR = 1
# battery powered?
HOY_BATTERY_MODE = false
# voltage to turn off the inverter
HOY_BATTERY_THRESHOLD_OFF_LIMIT_IN_V = 47
# voltage to limit the inverter to a maximum of HOY_BATTERY_REDUCE_WATT
HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V = 48
# voltage to limit the inverter to a maximum of HOY_BATTERY_NORMAL_WATT
HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V = 48.5
# maximum limit in watts when battery is high (above HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V)
HOY_BATTERY_NORMAL_WATT = 1500
# maximum limit in watts when battery is low (below HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V)
HOY_BATTERY_REDUCE_WATT = 300
# reenable inverter at this voltage
HOY_BATTERY_THRESHOLD_ON_LIMIT_IN_V = 51
# define which panels you want to ignore for the panel voltage. E.g. if you have input 1 + 2 battery powered and input 3 + 4 for solar panels you can disable panel 3 and 4.
# if you want to ignore Panel 3 and Panel 4 type: "HOY_BATTERY_IGNORE_PANELS = 3,4". leave it empty for no ignore.
HOY_BATTERY_IGNORE_PANELS = 
# define prioriry of the inverters (possible values: 1 (high) ... 5 (low); default = 1). same priorities are also possible. Not supported in mixed modes (a mix of solar and battery powered inverters)
# example 1 (default):
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 1: 
# set limit of 1100W -> inverter 1 is set to 733W and inverter 2 is set to 367W
# set limit of 300W -> inverter 1 is set to 200W and inverter 2 is set to 100W
# example 2:
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 2: 
# set limit of 1100W -> inverter 1 is set to 1000W and inverter 2 is set to 100W
# set limit of 300W -> inverter 1 is set to 300W and inverter 2 is powered off
HOY_BATTERY_PRIORITY = 1
# Number of measured values for the moving average of the min panel voltage
HOY_BATTERY_AVERAGE_CNT = 1

[INVERTER_8]
# serial number of your inverter, if empty it is automatically read out of the API. If you have more than one inverter you should define the serial number here (prevents mix-up).
SERIAL_NUMBER = 
# manufacturer power rating of your inverter.
HOY_INVERTER_WATT = 
# max. power output of your inverter (e.g. if you have a 1500W Inverter and you only want to output max. 1000W)
HOY_MAX_WATT = 1500
# minimum limit in percent, e.g. 5% of your inverter power rating
HOY_MIN_WATT_IN_PERCENT = 5
# factor to multiply before set Limit. Some Inverters have some offsets, with that factor you can compensate it. Default = 1
HOY_COMPENSATE_WATT_FACTOR = 1
# battery powered?
HOY_BATTERY_MODE = false
# voltage to turn off the inverter
HOY_BATTERY_THRESHOLD_OFF_LIMIT_IN_V = 47
# voltage to limit the inverter to a maximum of HOY_BATTERY_REDUCE_WATT
HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V = 48
# voltage to limit the inverter to a maximum of HOY_BATTERY_NORMAL_WATT
HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V = 48.5
# maximum limit in watts when battery is high (above HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V)
HOY_BATTERY_NORMAL_WATT = 1500
# maximum limit in watts when battery is low (below HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V)
HOY_BATTERY_REDUCE_WATT = 300
# reenable inverter at this voltage
HOY_BATTERY_THRESHOLD_ON_LIMIT_IN_V = 51
# define which panels you want to ignore for the panel voltage. E.g. if you have input 1 + 2 battery powered and input 3 + 4 for solar panels you can disable panel 3 and 4.
# if you want to ignore Panel 3 and Panel 4 type: "HOY_BATTERY_IGNORE_PANELS = 3,4". leave it empty for no ignore.
HOY_BATTERY_IGNORE_PANELS = 
# define prioriry of the inverters (possible values: 1 (high) ... 5 (low); default = 1). same priorities are also possible. Not supported in mixed modes (a mix of solar and battery powered inverters)
# example 1 (default):
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 1: 
# set limit of 1100W -> inverter 1 is set to 733W and inverter 2 is set to 367W
# set limit of 300W -> inverter 1 is set to 200W and inverter 2 is set to 100W
# example 2:
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 2: 
# set limit of 1100W -> inverter 1 is set to 1000W and inverter 2 is set to 100W
# set limit of 300W -> inverter 1 is set to 300W and inverter 2 is powered off
HOY_BATTERY_PRIORITY = 1
# Number of measured values for the moving average of the min panel voltage
HOY_BATTERY_AVERAGE_CNT = 1

[INVERTER_9]
# serial number of your inverter, if empty it is automatically read out of the API. If you have more than one inverter you should define the serial number here (prevents mix-up).
SERIAL_NUMBER = 
# manufacturer power rating of your inverter.
HOY_INVERTER_WATT = 
# max. power output of your inverter (e.g. if you have a 1500W Inverter and you only want to output max. 1000W)
HOY_MAX_WATT = 1500
# minimum limit in percent, e.g. 5% of your inverter power rating
HOY_MIN_WATT_IN_PERCENT = 5
# factor to multiply before set Limit. Some Inverters have some offsets, with that factor you can compensate it. Default = 1
HOY_COMPENSATE_WATT_FACTOR = 1
# battery powered?
HOY_BATTERY_MODE = false
# voltage to turn off the inverter
HOY_BATTERY_THRESHOLD_OFF_LIMIT_IN_V = 47
# voltage to limit the inverter to a maximum of HOY_BATTERY_REDUCE_WATT
HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V = 48
# voltage to limit the inverter to a maximum of HOY_BATTERY_NORMAL_WATT
HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V = 48.5
# maximum limit in watts when battery is high (above HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V)
HOY_BATTERY_NORMAL_WATT = 1500
# maximum limit in watts when battery is low (below HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V)
HOY_BATTERY_REDUCE_WATT = 300
# reenable inverter at this voltage
HOY_BATTERY_THRESHOLD_ON_LIMIT_IN_V = 51
# define which panels you want to ignore for the panel voltage. E.g. if you have input 1 + 2 battery powered and input 3 + 4 for solar panels you can disable panel 3 and 4.
# if you want to ignore Panel 3 and Panel 4 type: "HOY_BATTERY_IGNORE_PANELS = 3,4". leave it empty for no ignore.
HOY_BATTERY_IGNORE_PANELS = 
# define prioriry of the inverters (possible values: 1 (high) ... 5 (low); default = 1). same priorities are also possible. Not supported in mixed modes (a mix of solar and battery powered inverters)
# example 1 (default):
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 1: 
# set limit of 1100W -> inverter 1 is set to 733W and inverter 2 is set to 367W
# set limit of 300W -> inverter 1 is set to 200W and inverter 2 is set to 100W
# example 2:
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 2: 
# set limit of 1100W -> inverter 1 is set to 1000W and inverter 2 is set to 100W
# set limit of 300W -> inverter 1 is set to 300W and inverter 2 is powered off
HOY_BATTERY_PRIORITY = 1
# Number of measured values for the moving average of the min panel voltage
HOY_BATTERY_AVERAGE_CNT = 1

[INVERTER_10]
# serial number of your inverter, if empty it is automatically read out of the API. If you have more than one inverter you should define the serial number here (prevents mix-up).
SERIAL_NUMBER = 
# manufacturer power rating of your inverter.
HOY_INVERTER_WATT = 
# max. power output of your inverter (e.g. if you have a 1500W Inverter and you only want to output max. 1000W)
HOY_MAX_WATT = 1500
# minimum limit in percent, e.g. 5% of your inverter power rating
HOY_MIN_WATT_IN_PERCENT = 5
# factor to multiply before set Limit. Some Inverters have some offsets, with that factor you can compensate it. Default = 1
HOY_COMPENSATE_WATT_FACTOR = 1
# battery powered?
HOY_BATTERY_MODE = false
# voltage to turn off the inverter
HOY_BATTERY_THRESHOLD_OFF_LIMIT_IN_V = 47
# voltage to limit the inverter to a maximum of HOY_BATTERY_REDUCE_WATT
HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V = 48
# voltage to limit the inverter to a maximum of HOY_BATTERY_NORMAL_WATT
HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V = 48.5
# maximum limit in watts when battery is high (above HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V)
HOY_BATTERY_NORMAL_WATT = 1500
# maximum limit in watts when battery is low (below HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V)
HOY_BATTERY_REDUCE_WATT = 300
# reenable inverter at this voltage
HOY_BATTERY_THRESHOLD_ON_LIMIT_IN_V = 51
# define which panels you want to ignore for the panel voltage. E.g. if you have input 1 + 2 battery powered and input 3 + 4 for solar panels you can disable panel 3 and 4.
# if you want to ignore Panel 3 and Panel 4 type: "HOY_BATTERY_IGNORE_PANELS = 3,4". leave it empty for no ignore.
HOY_BATTERY_IGNORE_PANELS = 
# define prioriry of the inverters (possible values: 1 (high) ... 5 (low); default = 1). same priorities are also possible. Not supported in mixed modes (a mix of solar and battery powered inverters)
# example 1 (default):
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 1: 
# set limit of 1100W -> inverter 1 is set to 733W and inverter 2 is set to 367W
# set limit of 300W -> inverter 1 is set to 200W and inverter 2 is set to 100W
# example 2:
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 2: 
# set limit of 1100W -> inverter 1 is set to 1000W and inverter 2 is set to 100W
# set limit of 300W -> inverter 1 is set to 300W and inverter 2 is powered off
HOY_BATTERY_PRIORITY = 1
# Number of measured values for the moving average of the min panel voltage
HOY_BATTERY_AVERAGE_CNT = 1

[INVERTER_11]
# serial number of your inverter, if empty it is automatically read out of the API. If you have more than one inverter you should define the serial number here (prevents mix-up).
SERIAL_NUMBER = 
# manufacturer power rating of your inverter.
HOY_INVERTER_WATT = 
# max. power output of your inverter (e.g. if you have a 1500W Inverter and you only want to output max. 1000W)
HOY_MAX_WATT = 1500
# minimum limit in percent, e.g. 5% of your inverter power rating
HOY_MIN_WATT_IN_PERCENT = 5
# factor to multiply before set Limit. Some Inverters have some offsets, with that factor you can compensate it. Default = 1
HOY_COMPENSATE_WATT_FACTOR = 1
# battery powered?
HOY_BATTERY_MODE = false
# voltage to turn off the inverter
HOY_BATTERY_THRESHOLD_OFF_LIMIT_IN_V = 47
# voltage to limit the inverter to a maximum of HOY_BATTERY_REDUCE_WATT
HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V = 48
# voltage to limit the inverter to a maximum of HOY_BATTERY_NORMAL_WATT
HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V = 48.5
# maximum limit in watts when battery is high (above HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V)
HOY_BATTERY_NORMAL_WATT = 1500
# maximum limit in watts when battery is low (below HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V)
HOY_BATTERY_REDUCE_WATT = 300
# reenable inverter at this voltage
HOY_BATTERY_THRESHOLD_ON_LIMIT_IN_V = 51
# define which panels you want to ignore for the panel voltage. E.g. if you have input 1 + 2 battery powered and input 3 + 4 for solar panels you can disable panel 3 and 4.
# if you want to ignore Panel 3 and Panel 4 type: "HOY_BATTERY_IGNORE_PANELS = 3,4". leave it empty for no ignore.
HOY_BATTERY_IGNORE_PANELS = 
# define prioriry of the inverters (possible values: 1 (high) ... 5 (low); default = 1). same priorities are also possible. Not supported in mixed modes (a mix of solar and battery powered inverters)
# example 1 (default):
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 1: 
# set limit of 1100W -> inverter 1 is set to 733W and inverter 2 is set to 367W
# set limit of 300W -> inverter 1 is set to 200W and inverter 2 is set to 100W
# example 2:
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 2: 
# set limit of 1100W -> inverter 1 is set to 1000W and inverter 2 is set to 100W
# set limit of 300W -> inverter 1 is set to 300W and inverter 2 is powered off
HOY_BATTERY_PRIORITY = 1
# Number of measured values for the moving average of the min panel voltage
HOY_BATTERY_AVERAGE_CNT = 1

[INVERTER_12]
# serial number of your inverter, if empty it is automatically read out of the API. If you have more than one inverter you should define the serial number here (prevents mix-up).
SERIAL_NUMBER = 
# manufacturer power rating of your inverter.
HOY_INVERTER_WATT = 
# max. power output of your inverter (e.g. if you have a 1500W Inverter and you only want to output max. 1000W)
HOY_MAX_WATT = 1500
# minimum limit in percent, e.g. 5% of your inverter power rating
HOY_MIN_WATT_IN_PERCENT = 5
# factor to multiply before set Limit. Some Inverters have some offsets, with that factor you can compensate it. Default = 1
HOY_COMPENSATE_WATT_FACTOR = 1
# battery powered?
HOY_BATTERY_MODE = false
# voltage to turn off the inverter
HOY_BATTERY_THRESHOLD_OFF_LIMIT_IN_V = 47
# voltage to limit the inverter to a maximum of HOY_BATTERY_REDUCE_WATT
HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V = 48
# voltage to limit the inverter to a maximum of HOY_BATTERY_NORMAL_WATT
HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V = 48.5
# maximum limit in watts when battery is high (above HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V)
HOY_BATTERY_NORMAL_WATT = 1500
# maximum limit in watts when battery is low (below HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V)
HOY_BATTERY_REDUCE_WATT = 300
# reenable inverter at this voltage
HOY_BATTERY_THRESHOLD_ON_LIMIT_IN_V = 51
# define which panels you want to ignore for the panel voltage. E.g. if you have input 1 + 2 battery powered and input 3 + 4 for solar panels you can disable panel 3 and 4.
# if you want to ignore Panel 3 and Panel 4 type: "HOY_BATTERY_IGNORE_PANELS = 3,4". leave it empty for no ignore.
HOY_BATTERY_IGNORE_PANELS = 
# define prioriry of the inverters (possible values: 1 (high) ... 5 (low); default = 1). same priorities are also possible. Not supported in mixed modes (a mix of solar and battery powered inverters)
# example 1 (default):
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 1: 
# set limit of 1100W -> inverter 1 is set to 733W and inverter 2 is set to 367W
# set limit of 300W -> inverter 1 is set to 200W and inverter 2 is set to 100W
# example 2:
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 2: 
# set limit of 1100W -> inverter 1 is set to 1000W and inverter 2 is set to 100W
# set limit of 300W -> inverter 1 is set to 300W and inverter 2 is powered off
HOY_BATTERY_PRIORITY = 1
# Number of measured values for the moving average of the min panel voltage
HOY_BATTERY_AVERAGE_CNT = 1

[INVERTER_13]
# serial number of your inverter, if empty it is automatically read out of the API. If you have more than one inverter you should define the serial number here (prevents mix-up).
SERIAL_NUMBER = 
# manufacturer power rating of your inverter.
HOY_INVERTER_WATT = 
# max. power output of your inverter (e.g. if you have a 1500W Inverter and you only want to output max. 1000W)
HOY_MAX_WATT = 1500
# minimum limit in percent, e.g. 5% of your inverter power rating
HOY_MIN_WATT_IN_PERCENT = 5
# factor to multiply before set Limit. Some Inverters have some offsets, with that factor you can compensate it. Default = 1
HOY_COMPENSATE_WATT_FACTOR = 1
# battery powered?
HOY_BATTERY_MODE = false
# voltage to turn off the inverter
HOY_BATTERY_THRESHOLD_OFF_LIMIT_IN_V = 47
# voltage to limit the inverter to a maximum of HOY_BATTERY_REDUCE_WATT
HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V = 48
# voltage to limit the inverter to a maximum of HOY_BATTERY_NORMAL_WATT
HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V = 48.5
# maximum limit in watts when battery is high (above HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V)
HOY_BATTERY_NORMAL_WATT = 1500
# maximum limit in watts when battery is low (below HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V)
HOY_BATTERY_REDUCE_WATT = 300
# reenable inverter at this voltage
HOY_BATTERY_THRESHOLD_ON_LIMIT_IN_V = 51
# define which panels you want to ignore for the panel voltage. E.g. if you have input 1 + 2 battery powered and input 3 + 4 for solar panels you can disable panel 3 and 4.
# if you want to ignore Panel 3 and Panel 4 type: "HOY_BATTERY_IGNORE_PANELS = 3,4". leave it empty for no ignore.
HOY_BATTERY_IGNORE_PANELS = 
# define prioriry of the inverters (possible values: 1 (high) ... 5 (low); default = 1). same priorities are also possible. Not supported in mixed modes (a mix of solar and battery powered inverters)
# example 1 (default):
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 1: 
# set limit of 1100W -> inverter 1 is set to 733W and inverter 2 is set to 367W
# set limit of 300W -> inverter 1 is set to 200W and inverter 2 is set to 100W
# example 2:
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 2: 
# set limit of 1100W -> inverter 1 is set to 1000W and inverter 2 is set to 100W
# set limit of 300W -> inverter 1 is set to 300W and inverter 2 is powered off
HOY_BATTERY_PRIORITY = 1
# Number of measured values for the moving average of the min panel voltage
HOY_BATTERY_AVERAGE_CNT = 1

[INVERTER_14]
# serial number of your inverter, if empty it is automatically read out of the API. If you have more than one inverter you should define the serial number here (prevents mix-up).
SERIAL_NUMBER = 
# manufacturer power rating of your inverter.
HOY_INVERTER_WATT = 
# max. power output of your inverter (e.g. if you have a 1500W Inverter and you only want to output max. 1000W)
HOY_MAX_WATT = 1500
# minimum limit in percent, e.g. 5% of your inverter power rating
HOY_MIN_WATT_IN_PERCENT = 5
# factor to multiply before set Limit. Some Inverters have some offsets, with that factor you can compensate it. Default = 1
HOY_COMPENSATE_WATT_FACTOR = 1
# battery powered?
HOY_BATTERY_MODE = false
# voltage to turn off the inverter
HOY_BATTERY_THRESHOLD_OFF_LIMIT_IN_V = 47
# voltage to limit the inverter to a maximum of HOY_BATTERY_REDUCE_WATT
HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V = 48
# voltage to limit the inverter to a maximum of HOY_BATTERY_NORMAL_WATT
HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V = 48.5
# maximum limit in watts when battery is high (above HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V)
HOY_BATTERY_NORMAL_WATT = 1500
# maximum limit in watts when battery is low (below HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V)
HOY_BATTERY_REDUCE_WATT = 300
# reenable inverter at this voltage
HOY_BATTERY_THRESHOLD_ON_LIMIT_IN_V = 51
# define which panels you want to ignore for the panel voltage. E.g. if you have input 1 + 2 battery powered and input 3 + 4 for solar panels you can disable panel 3 and 4.
# if you want to ignore Panel 3 and Panel 4 type: "HOY_BATTERY_IGNORE_PANELS = 3,4". leave it empty for no ignore.
HOY_BATTERY_IGNORE_PANELS = 
# define prioriry of the inverters (possible values: 1 (high) ... 5 (low); default = 1). same priorities are also possible. Not supported in mixed modes (a mix of solar and battery powered inverters)
# example 1 (default):
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 1: 
# set limit of 1100W -> inverter 1 is set to 733W and inverter 2 is set to 367W
# set limit of 300W -> inverter 1 is set to 200W and inverter 2 is set to 100W
# example 2:
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 2: 
# set limit of 1100W -> inverter 1 is set to 1000W and inverter 2 is set to 100W
# set limit of 300W -> inverter 1 is set to 300W and inverter 2 is powered off
HOY_BATTERY_PRIORITY = 1
# Number of measured values for the moving average of the min panel voltage
HOY_BATTERY_AVERAGE_CNT = 1

[INVERTER_15]
# serial number of your inverter, if empty it is automatically read out of the API. If you have more than one inverter you should define the serial number here (prevents mix-up).
SERIAL_NUMBER = 
# manufacturer power rating of your inverter.
HOY_INVERTER_WATT = 
# max. power output of your inverter (e.g. if you have a 1500W Inverter and you only want to output max. 1000W)
HOY_MAX_WATT = 1500
# minimum limit in percent, e.g. 5% of your inverter power rating
HOY_MIN_WATT_IN_PERCENT = 5
# factor to multiply before set Limit. Some Inverters have some offsets, with that factor you can compensate it. Default = 1
HOY_COMPENSATE_WATT_FACTOR = 1
# battery powered?
HOY_BATTERY_MODE = false
# voltage to turn off the inverter
HOY_BATTERY_THRESHOLD_OFF_LIMIT_IN_V = 47
# voltage to limit the inverter to a maximum of HOY_BATTERY_REDUCE_WATT
HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V = 48
# voltage to limit the inverter to a maximum of HOY_BATTERY_NORMAL_WATT
HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V = 48.5
# maximum limit in watts when battery is high (above HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V)
HOY_BATTERY_NORMAL_WATT = 1500
# maximum limit in watts when battery is low (below HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V)
HOY_BATTERY_REDUCE_WATT = 300
# reenable inverter at this voltage
HOY_BATTERY_THRESHOLD_ON_LIMIT_IN_V = 51
# define which panels you want to ignore for the panel voltage. E.g. if you have input 1 + 2 battery powered and input 3 + 4 for solar panels you can disable panel 3 and 4.
# if you want to ignore Panel 3 and Panel 4 type: "HOY_BATTERY_IGNORE_PANELS = 3,4". leave it empty for no ignore.
HOY_BATTERY_IGNORE_PANELS = 
# define prioriry of the inverters (possible values: 1 (high) ... 5 (low); default = 1). same priorities are also possible. Not supported in mixed modes (a mix of solar and battery powered inverters)
# example 1 (default):
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 1: 
# set limit of 1100W -> inverter 1 is set to 733W and inverter 2 is set to 367W
# set limit of 300W -> inverter 1 is set to 200W and inverter 2 is set to 100W
# example 2:
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 2: 
# set limit of 1100W -> inverter 1 is set to 1000W and inverter 2 is set to 100W
# set limit of 300W -> inverter 1 is set to 300W and inverter 2 is powered off
HOY_BATTERY_PRIORITY = 1
# Number of measured values for the moving average of the min panel voltage
HOY_BATTERY_AVERAGE_CNT = 1

[INVERTER_16]
# serial number of your inverter, if empty it is automatically read out of the API. If you have more than one inverter you should define the serial number here (prevents mix-up).
SERIAL_NUMBER = 
# manufacturer power rating of your inverter.
HOY_INVERTER_WATT = 
# max. power output of your inverter (e.g. if you have a 1500W Inverter and you only want to output max. 1000W)
HOY_MAX_WATT = 1500
# minimum limit in percent, e.g. 5% of your inverter power rating
HOY_MIN_WATT_IN_PERCENT = 5
# factor to multiply before set Limit. Some Inverters have some offsets, with that factor you can compensate it. Default = 1
HOY_COMPENSATE_WATT_FACTOR = 1
# battery powered?
HOY_BATTERY_MODE = false
# voltage to turn off the inverter
HOY_BATTERY_THRESHOLD_OFF_LIMIT_IN_V = 47
# voltage to limit the inverter to a maximum of HOY_BATTERY_REDUCE_WATT
HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V = 48
# voltage to limit the inverter to a maximum of HOY_BATTERY_NORMAL_WATT
HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V = 48.5
# maximum limit in watts when battery is high (above HOY_BATTERY_THRESHOLD_NORMAL_LIMIT_IN_V)
HOY_BATTERY_NORMAL_WATT = 1500
# maximum limit in watts when battery is low (below HOY_BATTERY_THRESHOLD_REDUCE_LIMIT_IN_V)
HOY_BATTERY_REDUCE_WATT = 300
# reenable inverter at this voltage
HOY_BATTERY_THRESHOLD_ON_LIMIT_IN_V = 51
# define which panels you want to ignore for the panel voltage. E.g. if you have input 1 + 2 battery powered and input 3 + 4 for solar panels you can disable panel 3 and 4.
# if you want to ignore Panel 3 and Panel 4 type: "HOY_BATTERY_IGNORE_PANELS = 3,4". leave it empty for no ignore.
HOY_BATTERY_IGNORE_PANELS = 
# define prioriry of the inverters (possible values: 1 (high) ... 5 (low); default = 1). same priorities are also possible. Not supported in mixed modes (a mix of solar and battery powered inverters)
# example 1 (default):
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 1: 
# set limit of 1100W -> inverter 1 is set to 733W and inverter 2 is set to 367W
# set limit of 300W -> inverter 1 is set to 200W and inverter 2 is set to 100W
# example 2:
# inverter 1 = 1000W, priority = 1 // inverter 2 = 500W, priority = 2: 
# set limit of 1100W -> inverter 1 is set to 1000W and inverter 2 is set to 100W
# set limit of 300W -> inverter 1 is set to 300W and inverter 2 is powered off
HOY_BATTERY_PRIORITY = 1
# Number of measured values for the moving average of the min panel voltage
HOY_BATTERY_AVERAGE_CNT = 1

# grid power
#    ...
#     |
#     | -------> if you defined ON_GRID_USAGE_JUMP_TO_LIMIT_PERCENT > 0, then the limit will jump to the defined percent of HOY_MAX_WATT when reaching this point. else: increasing limit <-------
#     |
#   [0W]      [POWERMETER_MAX_POINT]
#     |
#     | -------> increasing limit <-------
#     |
#  [-50W]     [POWERMETER_TARGET_POINT + POWERMETER_TOLERANCE]
#     |
#     | -------> no limit change between -100W ... -50W <-------
#     |
#  [-75W]     [POWERMETER_TARGET_POINT]
#     |
#     | -------> no limit change between -100W ... -50W <-------
#     |
#  [-100W]    [POWERMETER_TARGET_POINT - POWERMETER_TOLERANCE]
#     |
#     | -------> decreasing limit <-------
#     |
#    ...