[Bug]: ESP32 C3 dont show any serial text

[SkyDumpper]

What happened?

The sketch compile and upload correctly, but after restart dont show any text and of course my ps4 controller dont connect.

Use a ESP32 C3 ZERO board. In arduino IDE i configured USB CDC on boot: Enable

In Board information:

BN: ESP32 Family Device
VID: 303a
PID: 1001
SN: 64:E8:33:88:61:50

Thank you.

Bluepad32 Version

latest from develop branch

Bluepad32 version custom

Example: Using Git develop branch commit hash #xxxxxxx

Bluepad32 Platform

Arduino IDE

Platform version

IDE 1.8.16

Controller

PS4

Microcontroller

ESP32-C3

Microcontroller board

ESP32-C3-ZERO

https://www.waveshare.com/wiki/ESP32-C3-Zero

OS

Windows

Relevant log output

No response

Relevant sketch

No response

[SkyDumpper]

esptool.py v4.5.1
Serial port COM6
Connecting...
Chip is ESP32-C3 (revision v0.4)
Features: WiFi, BLE
Crystal is 40MHz
MAC: 64:e8:33:88:61:50
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
Configuring flash size...
Erasing flash (this may take a while)...
Chip erase completed successfully in 15.1s
Compressed 13248 bytes to 9562...
Writing at 0x00000000... (100 %)
Wrote 13248 bytes (9562 compressed) at 0x00000000 in 0.2 seconds (effective 436.0 kbit/s)...
Hash of data verified.
Compressed 3072 bytes to 146...
Writing at 0x00008000... (100 %)
Wrote 3072 bytes (146 compressed) at 0x00008000 in 0.1 seconds (effective 452.6 kbit/s)...
Hash of data verified.
Compressed 8192 bytes to 47...
Writing at 0x0000e000... (100 %)
Wrote 8192 bytes (47 compressed) at 0x0000e000 in 0.1 seconds (effective 581.5 kbit/s)...
Hash of data verified.
Compressed 583616 bytes to 334297...
Writing at 0x00010000... (4 %)
Writing at 0x0001aeb1... (9 %)
Writing at 0x00025a64... (14 %)
Writing at 0x0002fd13... (19 %)
Writing at 0x000366b5... (23 %)
Writing at 0x0003c7ac... (28 %)
Writing at 0x00042a3c... (33 %)
Writing at 0x000492ba... (38 %)
Writing at 0x0004f1c8... (42 %)
Writing at 0x00055278... (47 %)
Writing at 0x0005b286... (52 %)
Writing at 0x00060fef... (57 %)
Writing at 0x00067bf4... (61 %)
Writing at 0x0006e933... (66 %)
Writing at 0x0007524b... (71 %)
Writing at 0x0007b155... (76 %)
Writing at 0x00080f26... (80 %)
Writing at 0x00088d79... (85 %)
Writing at 0x0008f8d6... (90 %)
Writing at 0x00095862... (95 %)
Writing at 0x0009bd5f... (100 %)
Wrote 583616 bytes (334297 compressed) at 0x00010000 in 4.7 seconds (effective 1000.6 kbit/s)...
Hash of data verified.

Leaving...
Hard resetting via RTS pin...

[ricardoquesada]

DualShock4 doesn't work on ESP32-C3
https://bluepad32.readthedocs.io/en/latest/supported_gamepads/#bluetooth-gamepads-and-their-protocol

Try with "USB Mode" in "Debug Mode"
#65 (comment)