Skip to content

Latest commit

 

History

History
146 lines (104 loc) · 7.64 KB

README.md

File metadata and controls

146 lines (104 loc) · 7.64 KB
Raw

vSphere Tanzu Kubernetes Grid Image Builder

vSphere Tanzu Kubernetes Grid Image Builder provides tooling that can be used to build node images for use with vSphere with Tanzu.

Content

Prerequisites

Below are the prerequisites for building the node images

  • vSphere Environment version >= 8.0
  • DCHP configured for vCenter (required by Packer)
  • jq version >= 1.6
  • make version >= 4.2.1
  • docker version >= 20.10.21
  • Linux environment should have the below utilities available on the system

Building Images

Demo

  • Clone this repository on the linux environment for building the image.
  • Update the vSphere environment details like vCenter IP, Username, Password, etc. in vsphere.j2
  • Select the Kubernetes version.
    • Use make list-versions to list supported Kubernetes versions.
  • Run the artifacts container for the selected Kubernetes version using make run-artifacts-container KUBERNETES_VERSION=v1.22.13+vmware.1.
    • Default port used by the container is 8080 but this can be configured using the ARTIFACTS_CONTAINER_PORT parameter.
  • Run the image-builder container to build the node image(use make build-node-image target).
    • When building photon images make sure to open ports from 8000 to 9000 or else refer to this document to customize the ports.
  • Once the OVA is generated upload the OVA to a content library used by the supervisor.
  • To clean the containers and artifacts use the make clean target.

Supported Kubernetes Versions

supported-versions.json holds information about the supported Kubernetes versions and their corresponding supported OS targets along with the artifacts container image URL. This file will be updated when a new Kubernetes version is supported by the vSphere Tanzu team.

Make targets

Help

  • make help Provides help information about different make targets
make
make help
  • make list-versions gives information about supported Kubernetes versions and the corresponding OS targets
make list-versions PRINT_HELP=y # To show the help information for this target.
make list-versions              # Retrieves information from supported-versions.json file.

Clean

There are three different clean targets to clean the containers or artifacts generated during the process or both.

  • make clean-containers is used to stop/remove the artifacts or image builder or both.
    • During the container creation, All containers related to BYOI will be labelled as byoi
      • artifacts container will have byoi_artifacts and Kubernetes version as labels.
      • image builder container will have byoi_image_builder, Kubernetes version, and os target as labels
make clean-containers PRINT_HELP=y         # To show the help information for this target
make clean-containers                      # To clean all the artifacts and image-builder containers
make clean-containers LABEL=byoi_artifacts # To remove artifact containers
  • make clean-image-artifacts is used to remove the image artifacts like OVA's and packer log files
make clean-image-artifacts PRINT_HELP=y                           # To show help information for this target
make clean-image-artifacts IMAGE_ARTIFACTS_PATH=/root/artifacts/  # To clean the image artifacts in a folder
  • make clean is a combination of clean-containers and clean-image-artifacts that cleans both containers and image artifacts
make clean PRINT_HELP=y                                                   # To show the help information for this target
make clean IMAGE_ARTIFACTS_PATH=/root/artifacts/                          # To clean image artifacts and containers
make clean IMAGE_ARTIFACTS_PATH=/root/artifacts/ LABEL=byoi_image_builder # To clean image artifacts and image builder containers

Image Building

  • make run-artifacts-container is used to run the artifacts container for a Kubernetes version at a particular port
    • artifacts image URL will be fetched from the supported-versions.json based on the Kubernetes version selected.
    • By default artifacts container uses port 8080 by default however this can be configured through the ARTIFACTS_CONTAINER_PORT parameter.
make run-artifacts-container PRINT_HELP=y                                                       # To show the help information for this target
make run-artifacts-container KUBERNETES_VERSION=v1.22.13+vmware.1 ARTIFACTS_CONTAINER_PORT=9090 # To run 1.22.13 Kubernetes artifacts container on port 9090
  • make build-container is used to build the image builder container locally with all the dependencies like Packer, Ansible, and OVF Tool.
make build-image-builder-container PRINT_HELP=y # To show the help information for this target.
make build-image-builder-container              # To create the image builder container.
  • make build-node-image is used to build the vSphere Tanzu compatible node image for a Kubernetes version.
    • Artifacts container IP is required to pull the required Carvel Packages during the image build process and the default artifacts container port is 8080 which can be configured through ARTIFACTS_CONTAINER_PORT.
    • TKR(Tanzu Kubernetes Release) Suffix is used to distinguish images built on the same version for a different purpose. Maximum suffix length can be 8 characters.
make build-node-image PRINT_HELP=y # To show the help information for this target.
make build-node-image OS_TARGET=photon-3 KUBERNETES_VERSION=v1.23.15+vmware.1 TKR_SUFFIX=byoi ARTIFACTS_CONTAINER_IP=1.2.3.4 IMAGE_ARTIFACTS_PATH=/Users/image ARTIFACTS_CONTAINER_PORT=9090 # Create photon-3 1.23.15 Kubernetes node image

Customizations Examples

Sample customization examples can be found here

Debugging

  • To enable debugging for the make file scripts export DEBUGGING=true.
  • Debug logs are enabled by default on the image builder container which can be viewed through the docker logs -f <container_name> command.
  • Packer logs can be found at <artifacts-folder>/logs/packer-<random_id>.log which will be helpful when debugging issues.

Contributing

The vSphere Tanzu Kubernetes Grid Image Builder project team welcomes contributions from the community. Before you start working with VMware Image Builder, please read our Developer Certificate of Origin. All contributions to this repository must be signed as described on that page. Your signature certifies that you wrote the patch or have the right to pass it on as an open-source patch. For more detailed information, please refer to CONTRIBUTING.

License

This project is available under the Mozilla Public License, V2.0.