Skip to content

Latest commit

 

History

History
273 lines (196 loc) · 10.4 KB

README.md

File metadata and controls

273 lines (196 loc) · 10.4 KB

Digiplan

Built with Cookiecutter Django Black code style

App for Digiplan project. The data pipeline can be found here: Digipipe

Getting started

First you have to decide, wether you want to run the application via Docker or simply via python. For backend developers, I would recommend to install it regulary with python. For frontend developers it is simplier to just run docker and not to care about python environment and dependencies.

Obviously, you have to clone this repo first.

Prepare Data

In both cases, the datapackage from digipipe have to be placed into folder digiplan/data/ and renamed into digipipe, so that they can be found by the application and uploaded into database.

Using standard python installation

Setting up environment

Prerequisite: conda (Anaconda /Miniconda) Enter repo folder and set up a conda environment and activate it:

conda env create -f environment.yml
conda activate digiplan

Install poetry (python dependency manager used in this project) and dependencies for the project (Note: Installing poetry via pip into same environment is not recommended and can cause trouble! Instead it should be installed system-wide via command below or pipx):

curl -sSL https://install.python-poetry.org | python3 -
poetry install

The project uses pre-commit in order to check for errors and linting bugs before commits. To activate pre-commit simply run:

pre-commit install

Now you should be ready to start the application by running: (This will throw a database error, as we must set up a database)

python manage.py runserver

As the project uses a database you must have to set up a database first. I highly recommend to use postgresql fot that. Please follow online tutorials to set up database correctly and come back here, if everything is set up.

In order to run oemof simulations using django-oemof, you have to set up celery together with a locally running redis server. You can find instructions at https://realpython.com/caching-in-django-with-redis/#install-redis on how to install redis. Simplest solution to install and run redis it via apt:

sudo apt-get install redis-server
redis-server

Afterwards, make sure that following variable is set in your environment:

  • CELERY_BROKER_URL=redis://localhost:6379/0 (default port used here) and run celery from your terminal:
export DJANGO_READ_DOT_ENV_FILE=True; celery -A config.celery worker -l INFO

Configuration

Configuration is done by django configuration files in config/settings/ and by using environment variables (for database, redis, etc.). Environment variables have to be set using the following structure:

  • DATABASE_URL=postgis://<user>:<password>@<host>:<port>/<database>
  • TILING_SERVICE_STYLE_ID=<URL to mapbox style>
  • TILING_SERVICE_TOKEN=<token>
  • PROJ_LIB=<path to folder _proj/_, needed for GDAL>
  • REDIS_URL=redis://<host>:<port> (if REDIS is used)
  • USE_DISTILLED_MVTS=<True/False> (should be set to False at first)
  • USE_DOCKER=<True/False>

You can set up environment variables either by using your IDE, or by setting them via your system. Please follow tutorials for this or ask your local IT-expert.

Example: local dev configuration without Docker

  1. Merge given local env files into newly created root .env file: make local_env_file
  2. Adjust values in root .env file to your needs. For example your hostname is probably localhost and not postgres. Maybe you want also use a different user or password.
  3. Set environment variable DJANGO_READ_DOT_ENV_FILE to True, e.g. via simple export: export DJANGO_READ_DOT_ENV_FILE=True. You can persist the env export by putting it for example into your bashrc file (terminal restart needed afterwards):
    echo -e "\n# Use .env file for Digiplan in local dev environment\nexport DJANGO_READ_DOT_ENV_FILE=True" >> ~/.bashrc
  4. Create in your local Postgres Database Management System a database like defined in your .env file (e.g. via pgAdmin or psql)
  5. In your database create following extensions:
      CREATE EXTENSION postgis;
    

Load data into application

First you have to set up all tables in the database by runnning:

python manage.py migrate

Afterwards you have to load in data. To simplify data commands a Makefile has been added, which can be used by command make. You can load all data by running (or you can run them one-by-one):

make load_regions load_data

And you can empty all data by running:

make empty_data empty_regions

Using Docker

Make sure you have Docker and Docker-Compose installed. You may have to put sudo in front of the commands. While using the following commands, exchange production.yml (production server) and _ local.yml_ (local development) accordingly to your needs!

USE_DISTILLED_MVTS should be set to False at first in the env file.

Start container

docker-compose -f production.yml up -d --build

Depending on your deployment (local/production), the server should be available under localhost:8000 (local) or at docker container at port 5000 (production server needs to be forwarded by a proxy server). Sometimes the CSS is not loaded correctly in production mode, restarting the production server can help:

docker-compose -f production.yml restart

By now, no data is visible, as the geometries have to be loaded into database first by the following steps.

Load data into database

Following steps are necessary to refresh/load data on production server:

docker-compose -f production.yml run --rm django python manage.py migrate
docker-compose -f production.yml run --rm django make empty_data empty_regions
docker-compose -f production.yml run --rm django make load_regions load_data load_population

In order to increase loading speed of vector tiles, the tiles can be prerenderd. This is done by using distilled vector tiles. You can create those vector tiles by using the following commands: (Note: You have to recreate distilled vector tiles after each data update in order to see changes on the map)

docker-compose -f production.yml run --name digiplan_distill -e DISTILL=True django /bin/bash -c "python manage.py collectstatic --noinput; python manage.py distill-local --force --exclude-staticfiles ./distill"
docker cp digiplan_distill:/app/distill/ ./digiplan/static/mvts/
# commit and push, afterwards remove temp container:
docker rm -f digiplan_distill

Adding new (static) layers

Outdated! - django-mapengine is used to set up map sources and layers instead!

In order to add new layers to the application following steps must be made:

  • add geopackages containing vector layer data into folder digiplan/data.

  • create a Django model in digiplan/map/models.py with following minimum requirements:

    • it must contain a GeometryField (Point/Polygon) named geom,
    • it must contain the default Django Manager as attribute objects,
    • it must contain a MVTManager derived from digiplan/map/managers.py. Normally, a StaticMVTManager (which activates filtering of vector tiles by given zoom level) should be chosen.
  • run makemigrations and migrate (see commands above),

  • add an entry for new layer in MODELS in digiplan/utils/data_processing.py ,

  • load layer data into DB by running load_data or by loading only specific data.

Now the layer data is present in DB, but not yet served as vector tiles. This can be accomplished with following steps:

  • add mapbox layer information in digiplan/map/layers.py (either in existing category or by adding a new one)
  • add layer to STATIC_MVT_LAYERS in digiplan/map/mvt_layers.

The layer and a related switch should now be visible on map and on the detail panel.

Testing

We encourage all to build application tests. As best practice, this should be done immediately after documentation of the application being built, before starting on any coding.

Pytest

This project uses the Pytest, a framework for easily building simple and scalable tests. After you have set up to develop locally, run the following commands to make sure the testing environment is ready: pytest

You will get a readout of the users app that has already been set up with tests. If you do not want to run the pytest on the entire project, you can target a particular app by typing in its location:

pytest <path-to-app-in-project/app>

If you set up your project to develop locally with docker, run the following command:

docker-compose -f local.yml run --rm django pytest

Targeting particular apps for testing in docker follows a similar pattern as previously shown above.

Coverage

You should build your tests to provide the highest level of code coverage. You can run the pytest with code coverage by typing in the following command:

coverage run -m pytest

Once the tests are complete, in order to see the code coverage, run the following command:

coverage report

If you're running the project locally with Docker, use these commands instead:

docker-compose -f local.yml run --rm django coverage run -m pytest docker-compose -f local.yml run --rm django coverage report

Note

At the root of the project folder, you will find the pytest.ini file. You can use this to customize the pytest to your liking.

There is also the .coveragerc. This is the configuration file for the coverage tool.

Useful commands

Example to only load specific data:

docker-compose -f production.yml run --rm django python -u manage.py shell --command="from djagora.utils import load_overlays; from djagora.utils.load_configs import DYNAMIC_OVERLAYS; overlays = [item for item in DYNAMIC_OVERLAYS if item['name'].startswith('settlement')]; load_overlays.run(overlays=overlays)"

If celery does not complete, but shows no errors you can check redis for errors:

docker exec -it <redis-container> bash
redis-cli keys "*"
redis-cli get <task-meta-with-current-id>