Skip to content

Latest commit

 

History

History
46 lines (24 loc) · 1.46 KB

README.md

File metadata and controls

46 lines (24 loc) · 1.46 KB
Raw

WaveShare_RP2040-LCD_mecrisp_Forth

Can be modified for other displays, but was based on this device: https://www.waveshare.com/wiki/RP2040-LCD-0.96

lcd v1 for mecrisp - Getting Started

  1. Program as per mecrisp-stellaris README for the Pico. (BOOTSEL while plugging USB, copy with tools ut2).

  2. Upload the code in lcd_v1_mecrisp.fth via a serial terminal to UART1 (GP0 GP1).

Examples

  • test_fill
  • line_test (requires lcd.init if you haven't used test_fill)
  • test_text (required lcd.init if you haven't used test_fill)
  • center_test (required lcd.init if you haven't used test_fill)

Notes for v1 mecrisp

  • Time to update display is currently about 83ms - and is limited by Software SPI. Would h/w SPI be faster?

lcd v2 for Zeptoforth - Getting Started

This was tested with zeptoforth_full_usb-1.0.2.uf2 using communications over the USB port to the RP2040-LCD-0.96 board.

  1. Program as per Zeptoforth instructions - drag the UF2 file over to the USB mounted RP2040 to program (after pressing reset while holding boot).

  2. Upload the code in lcd_v2_zepto.fth via a serial terminal to USB.

Examples

  • test_fill
  • line_test (requires lcd.init if you haven't used test_fill)
  • test_text (required lcd.init if you haven't used test_fill)
  • center_test (required lcd.init if you haven't used test_fill)

Notes for v2 Zeptoforth

  • Time to update display is currently about ??m. This is a h/w SPI implementation.