First Images of (partial) teardown of Roborock "QRevo Curv" (Model V10VIV / P20 pro)

[linuxlurak]

This is a first set of pictures for those who want to start rooting the robot vacuum cleaner. There is a USB micro port on top. It does not act as a USB Device (not when starting up and not during operation).

Device information:

• Name(s) of the device: "QRevo Curv" aka V10VIV aka P20 pro
• FCC Link V01: https://fccid.io/2AN2O-V10VIV01 <-- Temporary restriction on access to some data until 2025-01-21
• FCC Link V02: https://fccid.io/2AN2O-V10VIV02 <-- Temporary restriction on access to some data until 2025-01-21

Other Infos coming soon, not connected to roborock/xiaomi cloud at the moment.
Use miiocli device --ip <ip address> --token <token> info.

• Model: [e.g., lumi.gateway.v3]
• Hardware version:
• Firmware version:

Chips:
Wifi: RTL8189FTV Datasheet:TL8189FCA.pdf (https://github.com/m3y54m/rtl818x-wifi-modules)
CPU: Nation N32G455 VEL7 TBE02002 (32-bit ARM Cortex-M4F) Datasheet: 1662453066413965.pdf
Uknown: Bai DU2110 241501
NAND: Not found, very likely on the other side of the PCB.

Pcictures: