Zig Image library

This is a work in progress library to create, process, read and write different image formats with Zig programming language.

Install & Build

This library uses zig nominated 2024.10.0-mach. To install using zigup:

zigup 0.14.0-dev.1911+3bf89f55c

Use zigimg in your project

How to add to your project:

As a submodule

Clone this repository or add as a submodule
Add to your build.zig

exe.addAnonymousModule("zigimg", .{.source_file = .{ .path = "zigimg.zig" }});

Through the package manager

Run this command in your project folder to add zigimg to your build.zig.zon

zig fetch --save "https://github.com/zigimg/zigimg/archive/$REPLACE_WITH_WANTED_COMMIT.tar.gz"

Get the module in your build.zig file

const zigimg_dependency = b.dependency("zigimg", .{
    .target = target,
    .optimize = optimize,
});

exe.root_module.addImport("zigimg", zigimg_dependency.module("zigimg"));

After you are done setting up, you can look at the user guide below.

Test suite

To run the test suite, checkout the test suite and run

Checkout zigimg
Go back one folder and checkout the test suite
Run the tests with zig build

zig build test

Supported image formats

Image Format	Read	Write
ANIM	❌	❌
BMP	✔️ (Partial)	✔️ (Partial)
GIF	✔️	❌
ICO	❌	❌
IILBM	❌	❌
JPEG	❌	❌
PAM	✔️	✔️
PBM	✔️	✔️
PCX	✔️	✔️
PGM	✔️ (Partial)	✔️ (Partial)
PNG	✔️	✔️ (Partial)
PPM	✔️ (Partial)	✔️ (Partial)
QOI	✔️	✔️
TGA	✔️	✔️
TIFF	❌	❌
XBM	❌	❌
XPM	❌	❌

BMP - Bitmap

version 4 BMP
version 5 BMP
24-bit RGB read & write
32-bit RGBA read & write
Doesn't support any compression

GIF - Graphics Interchange Format

Support GIF87a and GIF89a
Support animated GIF with Netscape application extension for looping information
Supported interlaced
Supports tiled and layered images used to achieve pseudo true color and more.
The plain text extension is not supported

PAM - Portable Arbitrary Map

Currently, this only supports a subset of PAMs where:

The tuple type is official (see man 5 pam) or easily inferred (and by extension, depth is 4 or less)
All the images in a sequence have the same dimensions and maxval (it is technically possible to support animations with different maxvals and tuple types as each AnimationFrame has its own PixelStorage, however, this is likely not expected by users of the library)
Grayscale,
Grayscale with alpha
Rgb555
Rgb24 and Rgba32
Bgr24 and Bgra32
Rgb48 and Rgba64

PBM - Portable Bitmap format

Everything is supported

PCX - ZSoft Picture Exchange format

Support monochrome, 4 color, 16 color and 256 color indexed images
Support 24-bit RGB images

PGM - Portable Graymap format

Support 8-bit and 16-bit grayscale images
16-bit ascii grayscale loading not tested

PNG - Portable Network Graphics

Support all pixel formats supported by PNG (grayscale, grayscale+alpha, indexed, truecolor, truecolor with alpha) in 8-bit or 16-bit.
Support the mininal chunks in order to decode the image.
Not all images in Png Test Suite is covered but should be good enough for now.

PPM - Portable Pixmap format

Support 24-bit RGB (8-bit per channel)
Missing 48-bit RGB (16-bit per channel)

QOI - Quite OK Image Format

Imported from https://github.com/MasterQ32/zig-qoi with blessing of the author

TGA - Truevision TGA format

Supports uncompressed and compressed 8-bit grayscale, indexed with 16-bit and 24-bit colormap, truecolor with 16-bit(RGB555), 24-bit or 32-bit bit depth.
Supports reading version 1 and version 2
Supports writing version 2

User Guide

Design philosophy

zigimg offers color and image functionality. The library is designed around either using the convenient Image (or ImageUnmanaged) struct that can read and write image formats no matter the format.

Or you can also use the image format directly in case you want to extract more data from the image format. So if you find that Image does not give you the information that you need from a PNG or other format, you can use the PNG format albeit with a more manual API that Image hide from you.

`Image` vs `ImageUnmanaged`

Image bundle a memory allocator and ImageUnmanaged does not. Similar to std.ArrayList() and std.ArrayListUnmanaged() in Zig standard library. For all the examples we are going to use Image but it is similar with ImageUnmanaged.

Read an image

It is pretty straightforward to read an image using the Image struct.

From a file

You can use either a file path

const std = @import("std");
const zigimg = @import("zigimg");

pub fn main() !void {
    var gpa = std.heap.GeneralPurposeAllocator(.{}){};
    defer _ = gpa.deinit();

    const allocator = gpa.allocator();

    var image = try zigimg.Image.fromFilePath(allocator, "my_image.png");
    defer image.deinit();

    // Do something with your image
}

or a std.fs.File directly

const std = @import("std");
const zigimg = @import("zigimg");

pub fn main() !void {
    var gpa = std.heap.GeneralPurposeAllocator(.{}){};
    defer _ = gpa.deinit();

    const allocator = gpa.allocator();

    var file = try std.fs.cwd().openFile(file_path, .{});
    defer file.close();

    var image = try zigimg.Image.fromFile(allocator, file);
    defer image.deinit();

    // Do something with your image
}

From memory

const std = @import("std");
const zigimg = @import("zigimg");

const image_data = @embedFile("test.bmp");

pub fn main() !void {
    var gpa = std.heap.GeneralPurposeAllocator(.{}){};
    defer _ = gpa.deinit();

    const allocator = gpa.allocator();

    const image = try zigimg.Image.fromMemory(allocator, image_data[0..]);
    defer image.deinit();

    // Do something with your image
}

Accessing pixel data

For a single image, they are two ways to get accees to the pixel data.

Accessing a specific format directly

Yu can access the pixel data directly using Image.pixels. pixels is an union of all supported pixel formats.

For RGB pixel formats, just use the pixel format enum value and addresss the data directly.

pub fn example() void {
    // [...]
    // Assuming you already have an image loaded

    const first_pixel = image.pixels.rgb24[0];
}

For grayscale formats, you need to use .value to get the grayscale value. It can also contain the alpha value if you use the grayscale with alpha.

pub fn example() void {
    // [...]
    // Assuming you already have an image loaded

    const first_pixel = image.pixels.grayscale8Alpha[0];
    const grayscale = first_pixel.value;
    const alpha = grayscale.alpha;
}

For indexed formats, you need to first access the union value then either the indices or the palette. The palette color are stored in the Rgba32 pixel format.

pub fn example() void {
    // [...]
    // Assuming you already have an image loaded

    const first_color_palette = image.pixels.indexed8.palette[0];
    const first_pixel = image.pixels.indexed8.indices[0];
}

If you want to know the current pixel format use Image.pixelFormat().

Using the color iterator

You can use the iterator to get each pixel as the universal Colorf32 pixel format. (32-bit floating ploint RGBA)

pub fn example() void {
    // [...]
    // Assuming you already have an image loaded

    const color_it = image.iterator();

    while (color_it.next()) |color| {
        // Do something with color
    }
}

Accessing animation frames

In the case of an Image containing multiple frames, you can use Image.animation to get access to the animation information. Use Image.animation.frames to access each indivial frame. Each frame contain the pixel data and a frame duration in seconds (32-bit floating point).

Image.pixels will always point to the first frame of an animation also.

pub fn example() void {
    // [...]
    // Assuming you already have an image loaded

    const loop_count = image.animation.loop_count;

    for (image.animation.frames) |frame| {
        const rgb24_data = frame.pixels.rgb24;
        const frame_duration = frame.duration;
    }
}

Get raw bytes for texture transfer

Image has helper functions to help you get the right data to upload your image to the GPU.

pub fn example() void {
    // [...]
    // Assuming you already have an image loaded

    const image_data = image.rawBytes();
    const row_pitch = image.rowByteSize();
    const image_byte_size = image.imageByteSize();
}

Write an image

Each 3 functions to write an image take a union of encoder options for the target format. To know the actual options you'll need to consult the source code. The active tag of the union determine the target format, not the file extension.

Write to a file path

pub fn example() !void {
    // [...]
    // Assuming you already have an image loaded

    try image.writeToFilePath("my_new_image.png", .{ .png = .{} });

    // Or with encoder options
    try image.writeToFilePath("my_new_image.png", .{ .png = .{ .interlaced = true } });
}

Write to `std.fs.File`

pub fn example() !void {
    // [...]
    // Assuming you already have an image loaded and the file already created

    try image.writeToFile(file, .{ .bmp = .{} });
}

Write to a memory buffer

Ensure that you have enough place in your buffer before calling writeToMemory()

pub fn example() !void {
    // [...]
    // Assuming you already have an image loaded and the buffer already allocated

    try image.writeToMemory(buffer[0..], .{ .tga = .{} });
}

Create an image

Use Image.create() and pass the width, height and the pixel format that you want.

const std = @import("std");
const zigimg = @import("zigimg");

pub fn main() !void {
    var gpa = std.heap.GeneralPurposeAllocator(.{}){};
    defer _ = gpa.deinit();

    const allocator = gpa.allocator();

    var image = try zigimg.Image.create(allocator, 1920, 1080, .rgba32);
    defer image.deinit();

    // Do something with your image
}

Interpret raw pixels

If you are not dealing with a image format, you can import your pixel data using Image.fromRawPixels(). It will create a copy of the pixels data. If you want the image to take ownership or just pass the data along to write it to a image format, use ImageUnmanaged.fromRawPixelsOwned().

Using fromRawPixel():

const std = @import("std");
const zigimg = @import("zigimg");

pub fn main() !void {
    var gpa = std.heap.GeneralPurposeAllocator(.{}){};
    defer _ = gpa.deinit();

    const allocator = gpa.allocator();

    const my_raw_pixels = @embedData("raw_bgra32.bin");

    var image = try zigimg.Image.fromRawPixels(allocator, 1920, 1080, my_raw_pixels[0..], .bgra32);
    defer image.deinit();

    // Do something with your image
}

Using fromRawPixelsOwned():

const std = @import("std");
const zigimg = @import("zigimg");

pub fn main() !void {
    var gpa = std.heap.GeneralPurposeAllocator(.{}){};
    defer _ = gpa.deinit();

    const allocator = gpa.allocator();

    const my_raw_pixels = @embedData("raw_bgra32.bin");

    var image = try zigimg.ImageUnmanaged.fromRawPixelsOwned(1920, 1080, my_raw_pixels[0..], .bgra32);

    // Do something with your image
}

Use image format directly

In the case you want more direct access to the image format, all the image format are accessible from the zigimg module. However, you'll need to do a bit more manual steps in order to get the pixel data.

const std = @import("std");
const zigimg = @import("zigimg");

pub fn main() !void {
    var gpa = std.heap.GeneralPurposeAllocator(.{}){};
    defer _ = gpa.deinit();

    const allocator = gpa.allocator();

    const image_data = @embedFile("windows_rgba_v5.bmp");

    var stream_source = std.io.StreamSource{ .const_buffer = std.io.fixedBufferStream(image_data) };

    var bmp = zigimg.bmp.BMP{};

    const pixels = try bmp.read(allocator, &stream_source);
    defer pixels.deinit(allocator);

    std.log.info("BMP info header: {}", .{bmp.info_header});
}

For the curious, the program above generate the following output:

info: BMP info header: src.formats.bmp.BitmapInfoHeader{ .v5 = src.formats.bmp.BitmapInfoHeaderV5{ .header_size = 124, .width = 240, .height = 160, .color_plane = 1, .bit_count = 32, .compression_method = src.formats.bmp.CompressionMethod.bitfields, .image_raw_size = 153600, .horizontal_resolution = 2835, .vertical_resolution = 2835, .palette_size = 0, .important_colors = 0, .red_mask = 16711680, .green_mask = 65280, .blue_mask = 255, .alpha_mask = 4278190080, .color_space = src.formats.bmp.BitmapColorSpace.srgb, .cie_end_points = src.formats.bmp.CieXyzTriple{ .red = src.formats.bmp.CieXyz{ ... }, .green = src.formats.bmp.CieXyz{ ... }, .blue = src.formats.bmp.CieXyz{ ... } }, .gamma_red = 0, .gamma_green = 0, .gamma_blue = 0, .intent = src.formats.bmp.BitmapIntent.graphics, .profile_data = 0, .profile_size = 0, .reserved = 0 } }

Convert between pixel formats

You can use Image.convert() to convert between pixel formats. It will allocate the new pixel data and free the old one for you. It supports conversion from and to any pixel format. When converting down to indexed format, no dithering is done.

pub fn example() !void {
    // [...]
    // Assuming you already have an image loaded

    try image.convert(.float32);
}

PixelFormatConverter

If you prefer, you can use PixelFormatConverter directly.

pub fn example(allocator: std.mem.Allocator) !void {
    const indexed2_pixels = try zigimg.color.PixelStorage.init(allocator, .indexed2, 4);
    defer indexed2_pixels.deinit(allocator);

    // [...] Setup your indexed2 pixel data

    const bgr24_pixels = try zigimg.PixelFormatConverter.convert(allocator, &indexed2_pixels, .bgr24);
    defer bgr24_pixels.deinit(allocator);
}

OctTreeQuantizer

If you prefer more granular control to create an indexed image, you can use the OctTreeQuantizer directly.

pub fn example(allocator: std.mem.Allocator) !void {
    const image_data = @embedFile("windows_rgba_v5.bmp");

    var image = try zigimg.Image.fromMemory(allocator, image_data[0..]);
    defer image.deinit();

    var quantizer = zigimg.OctTreeQuantizer.init(allocator);
    defer quantizer.deinit();

    var color_it = image.iterator();

    while (color_it.next()) |pixel| {
        try quantizer.addColor(pixel);
    }

    var palette_storage: [256]zigimg.color.Rgba32 = undefined;
    const palette = quantizer.makePalette(255, palette_storage[0..]);

    const palette_index = try quantizer.getPaletteIndex(zigimg.color.Rgba32.initRgba(110, 0, 0, 255));
}

Get a color from a HTML hex string

You can get a color from a HTML hex string. The alpha component is always last. It also supports the shorthand version.

pub fn example() !void {
    const rgb24 = try zigimg.color.Rgb24.fromHtmlHex("#123499");
    const rgba32 = try zigimg.color.Rgba32.fromHtmlHex("FF000045");

    const red_rgb24 = try zigimg.color.Rgb24.fromHtmlHex("#F00");
    const blue_rgba32 = try zigimg.clor.Rgba32.fromHtmlHex("#00FA");
}

Predefined colors

You can access predefined colors for any pixel format using Colors().

const std = @import("std");
const zigimg = @import("zigimg");

pub fn main() !void {
    const red_float32 = zigimg.Colors(zigimg.color.Colorf32).Red;
    const blue_rgb24 = zigimg.Colors(zigimg.color.Rgb24).Blue;
}

Color management & color space

While zigimg does not support ICC profile yet (see #36) it does support a variety of color models and color spaces. All color space and color model are done in 32-bit floating point. So if you are not using Colorf32 / float32 as your pixel format, you'll need to convert to that format first.

The following device-dependent color model are supported:

HSL (Hue, Saturation, Luminance)
HSV (Hue, Saturation, Value) or also known as HSB (Hue, Saturation, Brightness)
CMYK (Cyan-Magenta-Yellow-Black)

The following device-inpendent color spaces are supported, with or without alpha:

CIE XYZ
CIE Lab
CIE LCh(ab), the cylindral representation of CIE Lab
CIE Luv
CIE LCh(uv), the cylindral representation of CIE Luv
HSLuv, a HSL representation of CIE LCh(uv) which is a cylindrical representation of CIE Luv color space
Oklab
Oklch, the cylindrical representation of Oklab

Convert between linear and gamma-corrected color

All color space transformation are done assuming a linear version of the color. To convert between gamma-converted and linear, you need to use any RGB colorspace and then call toGamma() or toLinear(), in this example I'm using both sRGB and BT709 (aka Rec.709).

You can use either the accurate version or the fast version. For example the sRGB transfer function is linear below a threshold and an exponent curve above the threshold but the fast version will use the approximate exponent curve for the whole range.

pub fn example(linear_color: zigimg.color.Colorf32) {
    const gamma_srgb = zigimg.color.sRGB.toGamma(linear_color);
    const gamma_bt709 = zigimg.color.BT709.toGammaFast(linear_color);

    const linear_srgb = zigimg.color.sRGB.toLinearFast(gamma_srgb);
    const linear_bt709 = zigimg.color.BT709.toLinear(gamma_bt609);
}

Convert a single color to a different color space

To convert to a device independant color space, you need first to use a reference RGB color space. Usually the most common for computer purposes is sRGB. Then each RGB colorspace has functions to convert from and to various color spaces. They support both non-alpha and alpha of the color space.

To a color space:

pub fn example(linear_color: zigimg.color.Colorf32) void {
    const xyz = zigimg.color.sRGB.toXYZ(linear_color);
    const lab_alpha = zigimg.color.sRGB.toLabAlpha(linear_color);
    const lch_ab = zigimg.color.sRGB.toLCHab(linear_color);
    const luv_alpha = zigimg.color.sRGB.toLuvAlpha(linear_color);
    const lch_uv = zigimg.color.sRGB.toLCHuv(linear_color);
    const hsluv = zigimg.color.sRGB.toHSLuv(linear_color);
    const oklab = zigimg.color.sRGB.toOklab(linear_color);
    const oklch = zigimg.color.sRGB.toOkLCh(linear_color);
}

When converting from a color space to a RGB color space, you need to specify if you want the color to be clamped inside the RGB colorspace or not because the resulting color could be outside of the RGB color space.

pub fn example(oklab: zigimg.color.Oklab) {
    const linear_srgb_clamped = zigimg.color.sRGB.fromOklab(oklab, .clamp);
    const linear_srgb = zigimg.color.sRGB.fromOklab(oklab, .none);
}

Convert a slice of color to a different color space

Converting each pixel individually will be tedious if you want to use image processing on the CPU. Almost all color space conversion offer an slice in-place conversion or a slice copy conversion. The in-place will reuse the same memory but interpret the color data differently. When you are conversion from a color space to a RGB color space, you need to specify if you want clamping or not.

Those conversions are only available with the alpha version of each color space.

pub fn exampleInPlace(linear_srgb_image: []zigimg.color.Colorf32) void {
    const slice_lab_alpha = zigimg.color.sRGB.sliceToLabAlphaInPlace(linear_srgb_image);

    // Do your image manipulation in CIE L*a*b*

    // Convert back to linear sRGB
    _ = zigimg.color.sRGB.sliceFromLabAlphaInPlace(slice_lab_alpha, .clamp);

    // or without clamping
     _ = zigimg.color.sRGB.sliceFromLabAlphaInPlace(slice_lab_alpha, .none);
}

pub fn exampleCopy(allocator: std.mem.Allocator, linear_srgb_image: []const zigimg.color.Colorf32) ![]zigimg.color.Colorf32 {
    const slice_oklab_alpha = try zigimg.color.sRGB.sliceToOklabCopy(allocator, linear_srgb_image);

    // Do your image manipulatioon in Oklab

    // Convert back to linear sRGB
    return try zigimg.color.sRGB.sliceFromOklabCopy(allocator, slice_oklab_alpha, .clamp);

    // Or without clamping
    return try zigimg.color.sRGB.sliceFromOklabCopy(allocator, slice_oklab_alpha, .none);
}

Convert between some cylindrical representation

CIE Lab, CIE Luv and Oklab have cylindrical representation of their color space, each color has functions to convert from and to the cylindrical version.

pub fn example() void {
    const lab = zigimg.color.CIELab{ .l = 0.12, .a = -0.23, .b = 0.56 };
    const luv_alpha = zigimg.color.CIELuvAlpha { .l = 0.4, .u = 0.5, .v = -0.2, .alpha = 0.8 };
    const oklab = zigimg.color.Oklab{ .l = 0.67, .a = 0.1, .b = 0.56 };

    const lch_ab = lab.toLCHab();
    const lch_uv_alpha = luv_alpha.toLCHuvAlpha();
    const oklch = oklab.toOkLCh();

    const result_lab = lch_ab.toLab();
    const result_luv_alpha = lch_uv_alpha.toLuvAlpha();
    const result_oklab = oklch.toOklab();
}

Convert color between RGB color spaces

To convert a single color, use the convertColor() function on the RgbColorspace struct:

pub fn example(linear_color: zigimg.color.Colorf32) void {
    const pro_photo_color = zigimg.color.sRGB.convertColor(zigimg.color.ProPhotoRGB, linear_color);
}

If you want to convert a whole slice of pixels, use convertColors(), it will apply the conversion in-place:

pub fn example(linear_image: []zigimg.color.Colorf32) void {
    const adobe_image = zigimg.color.sRGB.convertColors(zigimg.color.AdobeRGB, linear_image);
}

If the target RGB colorspace have a different white point, it will do the chromatic adapdation for you using the Bradford method.

Predefined RGB color spaces

Here the list of predefined RGB color spaces, all acessilbe from zigimg.color struct:

BT601_NTSC
BT601_PAL
BT709
sRGB
DCIP3.Display
DCIP3.Theater
DCIP3.ACES
BT2020
AdobeRGB
AdobeWideGamutRGB
ProPhotoRGB

Predefined white points

All predefined white point are accessed with zigimg.color.WhitePoints. All the standard illuminants are defined there.

Create your own RGB color space

You can create your own RGB color space using zigimg.color.RgbColorspace.init(). Each coordinate is in the 2D version of the CIE xyY color space.

If you don't care about linear and gamma conversion, just ignore those functions in the init struct.

fn myColorSpaceToGamma(value: f32) f32 {
    return std.math.pow(f32, value, 1.0 / 2.4);
}

fn myColorSpaceToLinear(value: f32) f32 {
    return std.math.pow(f32, value, 2.4);
}

pub fn example() void {
    pub const my_color_space = zigimg.color.RgbColorspace.init(.{
        .red = .{ .x = 0.6400, .y = 0.3300 },
        .green = .{ .x = 0.3000, .y = 0.6000 },
        .blue = .{ .x = 0.1500, .y = 0.0600 },
        .white = zigimg.color.WhitePoints.D50,
        .to_gamma = myColorSpaceToGamma,
        .to_gamma_fast = myColorSpaceToGamma,
        .to_linear = myColorSpaceToLinear,
        .to_linear_fast = myColorSpaceToLinear,
    });
}

Files

README.md

Latest commit

History