lesskey.nro

.TH LESSKEY 1 "Version 481: 31 Aug 2015"
.SH NAME
lesskey \- specify key bindings for less
.SH SYNOPSIS
.B "lesskey [-o output] [--] [input]"
.br
.B "lesskey [--output=output] [--] [input]"
.br
.B "lesskey -V"
.br
.B "lesskey --version"
.SH DESCRIPTION
.I Lesskey
is used to specify a set of key bindings to be used by 
.I less.
The input file is a text file which describes the key bindings.
If the input file is "-", standard input is read.
If no input file is specified, a standard filename is used
as the name of the input file, which depends on the system being used:
On Unix systems, $HOME/.lesskey is used;
on MS-DOS systems, $HOME/_lesskey is used;
and on OS/2 systems $HOME/lesskey.ini is used,
or $INIT/lesskey.ini if $HOME is undefined.
The output file is a binary file which is used by 
.I less.
If no output file is specified, 
and the environment variable LESSKEY is set,
the value of LESSKEY is used as the name of the output file.
Otherwise, a standard filename is used as the name of the output file,
which depends on the system being used:
On Unix and OS-9 systems, $HOME/.less is used;
on MS-DOS systems, $HOME/_less is used;
and on OS/2 systems, $HOME/less.ini is used,
or $INIT/less.ini if $HOME is undefined.
If the output file already exists,
.I lesskey
will overwrite it.
.PP
The -V or --version option causes
.I lesskey
to print its version number and immediately exit.  
If -V or --version is present, other options and arguments are ignored.
.PP
The input file consists of one or more
.I sections.
Each section starts with a line that identifies the type of section.
Possible sections are:
.IP #command
Defines new command keys.
.IP #line-edit
Defines new line-editing keys.
.IP #env
Defines environment variables.
.PP
Blank lines and lines which start with a pound sign (#) are ignored,
except for the special section header lines.

.SH "COMMAND SECTION"
The command section begins with the line
.sp
#command
.sp
If the command section is the first section in the file,
this line may be omitted.
The command section consists of lines of the form:
.sp
	\fIstring\fP <whitespace> \fIaction\fP [extra-string] <newline>
.sp
Whitespace is any sequence of one or more spaces and/or tabs.
The \fIstring\fP is the command key(s) which invoke the action.
The \fIstring\fP may be a single command key, or a sequence of up to 15 keys.
The \fIaction\fP is the name of the less action, from the list below.
The characters in the \fIstring\fP may appear literally, or be
prefixed by a caret to indicate a control key.
A backslash followed by one to three octal digits may be used to
specify a character by its octal value.
A backslash followed by certain characters specifies input
characters as follows:
.IP \eb
BACKSPACE
.IP \ee
ESCAPE
.IP \en
NEWLINE
.IP \er
RETURN
.IP \et
TAB
.IP \eku
UP ARROW
.IP \ekd
DOWN ARROW
.IP \ekr
RIGHT ARROW
.IP \ekl
LEFT ARROW
.IP \ekU
PAGE UP
.IP \ekD
PAGE DOWN
.IP \ekh
HOME
.IP \eke
END
.IP \ekx
DELETE
.PP
A backslash followed by any other character indicates that character is
to be taken literally.
Characters which must be preceded by backslash include
caret, space, tab and the backslash itself.
.PP
An action may be followed by an "extra" string.
When such a command is entered while running
.I less,
the action is performed, and then the extra
string is parsed, just as if it were typed in to
.I less.
This feature can be used in certain cases to extend
the functionality of a command.
For example, see the "{" and ":t" commands in the example below.
The extra string has a special meaning for the "quit" action:
when
.I less
quits, first character of the extra string is used as its exit status.

.SH EXAMPLE
The following input file describes the set of
default command keys used by less:
.sp
.nf
	#command
	\er		forw-line 
	\en		forw-line 
	e		forw-line 
	j		forw-line 
	\ekd	forw-line
	^E		forw-line 
	^N		forw-line 
	k		back-line 
	y		back-line 
	^Y		back-line 
	^K		back-line 
	^P		back-line 
	J		forw-line-force 
	K		back-line-force 
	Y		back-line-force 
	d		forw-scroll 
	^D		forw-scroll 
	u		back-scroll 
	^U		back-scroll 
	\e40	forw-screen 
	f		forw-screen 
	^F		forw-screen 
	^V		forw-screen 
	\ekD	forw-screen
	b		back-screen 
	^B		back-screen 
	\eev		back-screen 
	\ekU	back-screen
	z		forw-window 
	w		back-window 
	\ee\e40		forw-screen-force
	F		forw-forever 
	\eeF		forw-until-hilite
	R		repaint-flush 
	r		repaint 
	^R		repaint 
	^L		repaint 
	\eeu		undo-hilite
	g		goto-line 
	\ekh	goto-line
	<		goto-line 
	\ee<		goto-line 
	p		percent 
	%		percent 
	\ee[		left-scroll
	\ee]		right-scroll
	\ee(		left-scroll
	\ee)		right-scroll
	\ekl		left-scroll
	\ekr		right-scroll
	{		forw-bracket {}
	}		back-bracket {}
	(		forw-bracket ()
	)		back-bracket ()
	[		forw-bracket []
	]		back-bracket []
	\ee^F		forw-bracket 
	\ee^B		back-bracket 
	G		goto-end 
	\ee>		goto-end 
	>		goto-end 
	\eke	goto-end
	\eeG		goto-end-buffered
	=		status 
	^G		status 
	:f		status 
	/		forw-search 
	?		back-search 
	\ee/		forw-search *
	\ee?		back-search *
	n		repeat-search 
	\een		repeat-search-all 
	N		reverse-search 
	\eeN		reverse-search-all 
	&		filter
	m		set-mark 
	'		goto-mark 
	^X^X		goto-mark 
	E		examine 
	:e		examine 
	^X^V		examine 
	:n		next-file 
	:p		prev-file 
	t		next-tag
	T		prev-tag
	:x		index-file 
	:d		remove-file
	-		toggle-option 
	:t		toggle-option t
	s		toggle-option o
	_		display-option 
	|		pipe 
	v		visual 
	!		shell 
	+		firstcmd 
	H		help 
	h		help 
	V		version 
	0		digit
	1		digit
	2		digit
	3		digit
	4		digit
	5		digit
	6		digit
	7		digit
	8		digit
	9		digit
	q		quit 
	Q		quit 
	:q		quit 
	:Q		quit 
	ZZ		quit 
.fi
.sp
.SH PRECEDENCE
Commands specified by
.I lesskey
take precedence over the default commands.
A default command key may be disabled by including it in the
input file with the action "invalid".
Alternatively, a key may be defined 
to do nothing by using the action "noaction".
"noaction" is similar to "invalid", but 
.I less
will give an error beep for an "invalid" command, 
but not for a "noaction" command.
In addition, ALL default commands may be disabled by 
adding this control line to the input file:
.sp
#stop
.sp
This will cause all default commands to be ignored.
The #stop line should be the last line in that section of the file.
.PP
Be aware that #stop can be dangerous.  
Since all default commands are disabled, 
you must provide sufficient commands before the #stop line
to enable all necessary actions.
For example, failure to provide a "quit" command can lead to frustration.

.SH "LINE EDITING SECTION"
The line-editing section begins with the line:
.sp
#line-edit
.sp
This section specifies new key bindings for the line editing commands,
in a manner similar to the way key bindings for 
ordinary commands are specified in the #command section.
The line-editing section consists of a list of keys and actions,
one per line as in the example below.

.SH EXAMPLE
The following input file describes the set of
default line-editing keys used by less:
.sp
.nf
	#line-edit
	\et	    	forw-complete
	\e17		back-complete
	\ee\et		back-complete
	^L		expand
	^V		literal
	^A		literal
   	\eel		right
	\ekr		right
	\eeh		left
	\ekl		left
	\eeb		word-left
	\ee\ekl	word-left
	\eew		word-right
	\ee\ekr	word-right
	\eei		insert
	\eex		delete
	\ekx		delete
	\eeX		word-delete
	\eekx		word-delete
	\ee\eb		word-backspace
	\ee0		home
	\ekh		home
	\ee$		end
	\eke		end
	\eek		up
	\eku		up
	\eej		down
	^G		abort
.fi
.sp

.SH "LESS ENVIRONMENT VARIABLES"
The environment variable section begins with the line
.sp
#env
.sp
Following this line is a list of environment variable assignments.
Each line consists of an environment variable name, an equals sign (=)
and the value to be assigned to the environment variable.
White space before and after the equals sign is ignored.
Variables assigned in this way are visible only to
.I less.
If a variable is specified in the system environment and also in a
lesskey file, the value in the lesskey file takes precedence.
Although the lesskey file can be used to override variables set in the
environment, the main purpose of assigning variables in the lesskey file
is simply to have all 
.I less
configuration information stored in one file.

.SH EXAMPLE
The following input file sets the -i option whenever 
.I less
is run, and specifies the character set to be "latin1":
.sp
.nf
	#env
	LESS = -i
	LESSCHARSET = latin1
.fi
.sp

.SH "SEE ALSO"
less(1)

.SH WARNINGS
On MS-DOS and OS/2 systems, certain keys send a sequence of characters
which start with a NUL character (0).
This NUL character should be represented as \e340 in a lesskey file.

.SH COPYRIGHT
Copyright (C) 1984-2015  Mark Nudelman
.PP
less is part of the GNU project and is free software.
You can redistribute it and/or modify it
under the terms of either
(1) the GNU General Public License as published by
the Free Software Foundation; or (2) the Less License.
See the file README in the less distribution for more details
regarding redistribution.
You should have received a copy of the GNU General Public License
along with the source for less; see the file COPYING.
If not, write to the Free Software Foundation, 59 Temple Place,
Suite 330, Boston, MA  02111-1307, USA.
You should also have received a copy of the Less License;
see the file LICENSE.
.PP
less is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.

.SH AUTHOR
.PP
Mark Nudelman
.br
Send bug reports or comments to <bug-less@gnu.org>.