diff --git a/scripts/flash.sh b/scripts/flash.sh
deleted file mode 100755
index c5e76471a..000000000
--- a/scripts/flash.sh
+++ /dev/null
@@ -1,64 +0,0 @@
-#!/usr/bin/env bash
-
-run_dir="OpenDeck"
-
-if [[ $(pwd) != *"$run_dir" ]]
-then
-    echo This script must be run from $run_dir directory!
-    exit 1
-fi
-
-if [[ "$(command -v avrdude)" == "" ]]
-then
-    echo "ERROR: avrdude not installed"
-    exit 1
-fi
-
-echo -n "Please type the serial port on which ArduinoISP is connected, without /dev/ part.
-Port name usually has the following pattern, where X is number representing the port:
-    * ttyACMX (or ttyUSBX)
-If unsure, open Arduino IDE and check where your Arduino as an programmer is connected to under Tools/Port.
-Port: "
-
-read -r port
-
-echo "Please select AVR MCU you want to flash and then press enter:"
-
-mcus=$(find config/mcu -type f -name "at*" -exec basename -s '.yml' {} +)
-echo "$mcus" | cat -n
-
-echo -n "MCU number: "
-read -r mcu_nr
-
-echo "
-Please wait...
-"
-
-mcu=$(echo "$mcus" | head -n "$mcu_nr" | tail -n 1)
-
-# Don't use yaml parser (dasel) here so that this script can be run without any external tools
-unlock_fuse=$(< config/mcu/"$mcu".yml awk '{$1=$1};1' | grep ^unlock | cut -d: -f2 | xargs)
-lock_fuse=$(< config/mcu/"$mcu".yml awk '{$1=$1};1' | grep ^lock | cut -d: -f2 | xargs)
-ext_fuse=$(< config/mcu/"$mcu".yml awk '{$1=$1};1' | grep ^ext | cut -d: -f2 | xargs)
-low_fuse=$(< config/mcu/"$mcu".yml awk '{$1=$1};1' | grep ^low | cut -d: -f2 | xargs)
-high_fuse=$(< config/mcu/"$mcu".yml awk '{$1=$1};1' | grep ^high | cut -d: -f2 | xargs)
-
-echo -n "Type the path (location) of the binary you want to flash.
-If you want to flash official binary from OpenDeck repository, go to the following link and
-download appropriate .bin file: https://github.com/shanteacontrols/OpenDeck/releases
-.bin file can be found in release assets.
-
-Tip: you can also drag .bin file to the terminal - path to the binary will be printed.
-Path: "
-
-read -r path
-
-# Remove single quotes if present
-path=${path//\'/}
-
-echo "Connect programmer to programming header on the board and then press enter."
-read -rn1
-
-avrdude -p "$mcu" -P /dev/"$port" -b 19200 -c avrisp -C /etc/avrdude.conf -e -V -u -U lock:w:"$unlock_fuse":m -U efuse:w:"$ext_fuse":m -U hfuse:w:"$high_fuse":m -U lfuse:w:"$low_fuse":m
-avrdude -p "$mcu" -P /dev/"$port" -b 19200 -c avrisp -C /etc/avrdude.conf -U flash:w:"$path"
-avrdude -p "$mcu" -P /dev/"$port" -b 19200 -c avrisp -C /etc/avrdude.conf -V -u -U lock:w:"$lock_fuse":m
\ No newline at end of file