Skip to content

Latest commit

 

History

History
74 lines (60 loc) · 2.34 KB

README.md

File metadata and controls

74 lines (60 loc) · 2.34 KB
Raw

MQTT Consumer Input Plugin

The MQTT consumer plugin reads from the specified MQTT topics and creates metrics using one of the supported input data formats.

Configuration:

[[inputs.mqtt_consumer]]
  ## MQTT broker URLs to be used. The format should be scheme://host:port,
  ## schema can be tcp, ssl, or ws.
  servers = ["tcp://localhost:1883"]

  ## QoS policy for messages
  ##   0 = at most once
  ##   1 = at least once
  ##   2 = exactly once
  ##
  ## When using a QoS of 1 or 2, you should enable persistent_session to allow
  ## resuming unacknowledged messages.
  qos = 0

  ## Connection timeout for initial connection in seconds
  connection_timeout = "30s"

  ## Maximum messages to read from the broker that have not been written by an
  ## output.  For best throughput set based on the number of metrics within
  ## each message and the size of the output's metric_batch_size.
  ##
  ## For example, if each message from the queue contains 10 metrics and the
  ## output metric_batch_size is 1000, setting this to 100 will ensure that a
  ## full batch is collected and the write is triggered immediately without
  ## waiting until the next flush_interval.
  # max_undelivered_messages = 1000

  ## Topics to subscribe to
  topics = [
    "telegraf/host01/cpu",
    "telegraf/+/mem",
    "sensors/#",
  ]

  # if true, messages that can't be delivered while the subscriber is offline
  # will be delivered when it comes back (such as on service restart).
  # NOTE: if true, client_id MUST be set
  persistent_session = false
  # If empty, a random client ID will be generated.
  client_id = ""

  ## username and password to connect MQTT server.
  # username = "telegraf"
  # password = "metricsmetricsmetricsmetrics"

  ## Optional TLS Config
  # tls_ca = "/etc/telegraf/ca.pem"
  # tls_cert = "/etc/telegraf/cert.pem"
  # tls_key = "/etc/telegraf/key.pem"
  ## Use TLS but skip chain & host verification
  # insecure_skip_verify = false

  ## Data format to consume.
  ## Each data format has its own unique set of configuration options, read
  ## more about them here:
  ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
  data_format = "influx"

Tags:

  • All measurements are tagged with the incoming topic, ie topic=telegraf/host01/cpu