CHANGELOG.md

Changelog

Older changelog entries (v1...v8)

9.5.0 (2022-06-28)

Features

• Add methods to check if an OTA firmware update is in progress (#4742)

Bugfixes

• Export SerialAPISetupCommand enum (#4754)

Config file changes

• Correct param 3 unit and option labels for Dome Wireless Siren (#4751)

9.4.1 (2022-06-27)

Bugfixes

• Use predictable filename for log rotation, prevent collision with other applications (#4728)
• Mark Node Naming And Location CC commands NameSet and LocationSet as supported (#4735)
• Add missing enum member ZWavePlusRoleType.NetworkAwareSlave (#4723)
• Accept SceneActivationCCSet commands which are missing the mandatory dimming duration field (#4748)
• Soft-reset controller after NVM backup, preventing strange controller behavior (#4750)

Config file changes

• Work around Configuration Info reporting bug in Zooz ZEN34 (#4731)
• Add wake time and dimming duration params to Zooz ZEN34 (#4708)
• Add param 6 to HomeSeer HS-WS200+, FW 5.12+ (#4720)
• Add AIBase HA-ZW-5SABC (#4143)
• Add AIBase HA-ZW-5PAB (#4142)
• Add Fakro ARF Solar, template Fakro configs (#4740)

9.4.0 (2022-06-10)

Features

• Added "node found" event to notify about included nodes before they are bootstrapped, made it possible to delay the automatic interview of newly added nodes (#4692)

Bugfixes

• During NVM migration, try to preserve the RF config of the target stick (#4636)
• During bootstrapping, remember which security classes were not granted (#4637)

Config file changes

• Add fingerprints to Fibaro FGS-2x4 series (#4648)
• Preserve endpoints for RTC CT101 (#4647)
• Work around Configuration Info reporting bug in ZEN71/72/76/77 (#4666)
• Add Namron Z-Wave Touch Thermostat 16A (#3890)
• Refactor Zooz config files to use templates where possible (#4619)
• Rework Nortek config params to templates (#4640)
• Rework Leviton config params to templates (#4642)
• Update CT100 device config file (#4686)
• Add fingerprint 0x0003:0x0436 to "Kwikset 912" (#4667)
• Correct Zooz ZAC36 param numbers for Auto Test Mode (#4658)

Changes under the hood

• Migrated a lot of tests to the new testing setup (#4638, #4649)

9.3.0 (2022-05-19)

Features

• Align GetSerialApiInitData with new Host API specs, parse chip info (#4591)
• Add sendAndReceiveData method to ManufacturerProprietaryCCAPI (#4586)
• Implement sending Z-Wave+ CC Reports, respond to Get requests (#4605)
• Before a hard reset, the controller NIF will now be updated to contain the correct device type and supported/controlled CCs (#4599)

Bugfixes

• Throw meaningful errors when invokeCCAPI gets called with invalid args (#4613)
• Only enable Smart Start listening mode when there are active provisioning entries (#4598)
• In the Meter CC reset API call, the options parameter is now optional (#4624)
• Fixed an issue where Smart Start Provisioning entries would get corrupted during JSONL migration of the network cache. A manual workaround to restore lost entries from the old .json cache file is available (#4635)

Config file changes

• Add a warning about broken firmware to August Smart Lock Pro 3rd Gen (#4597)
• Minor fixes to Zooz ZEN26 configuration (#4608)
• Work around broken firmware of Intermatic PE653 (#4607)
• Updates for Illumino Dimmer Switch firmware 1.07 and Illumino Switch firmware 1.05 (#4574)

Changes under the hood

• Parsing and serializing Serial API messages and Command Classes was decoupled from the driver instance to make it easier to use these implementations independently (#4614, #4618)
• Implement MockController and MockNode for end-to-end testing of the driver with simulated networks (#4628)

9.2.2 (2022-05-09)

Bugfixes

• Check that the argument of provisionSmartStartNode is valid (#4581)
• Parse incoming MultilevelSwitchCC::StartLevelChange correctly (#4594)

Config file changes

• Add Motion Sensor Timeout param to Ring Keypad v2, FW 1.18+ (#4587)
• Warn about NAS-SC03ZE spontaneously resetting (#4593)
• Work around Configuration Info reporting bug in ZEN17/ZEN32 (#4595)

9.2.1 (2022-05-05)

Bugfixes

• The scheduled verification poll for value changes now only gets canceled for unsolicited reports when the expected value is received (#4569)
• Export missing controller-related types/enums from "zwave-js/safe" entrypoint (#4577)
• Correctly convert SmartStartProvisioningEntry from/to cache (#4580)

Config file changes

• Add Leviton VRPD3 parameters (#4572)

9.2.0 (2022-05-05)

Features

• When reading a SmartStart QR code, the requested security classes are now remembered. Add support for inactive provisioning entries (#4565)
• Log discarded bytes when reading invalid/unexpected data from the serial port (#4059)

Bugfixes

• When attempting to heal single nodes during an ongoing heal, the logs now mention this as the reason why the heal is skipped (#4567)
• When attempting to heal a single dead node, the node gets pinged first to check if it is really dead (#4567)
• During driver.destroy(), all event handlers for the controller and nodes now get removed and the driver.controller and driver.controller.nodes properties get reset/cleared (#4570)

Config file changes

• Add compat flag to disable strict meter/sensor/scale validation (#4568)
• Force multi channel lifeline association and preserve endpoints for PS9EP (#4563)
• Correct blade/curtain trip time unit for Aeotec Nano Shutter ZW141 (#4562)

9.1.0 (2022-05-03)

Features

• All CC APIs using durations now allow duration strings (like 1m12s) as an alternative to Duration class instances (#4558)
• CC values for the remaining duration until target are now readonly (#4558)

Bugfixes

• Hide value added/changed/deleted logs for user codes (#4527)
• Type ConfigValue is exported from "zwave-js" again (#4550)
• Leave SmartStart listening mode before adding/removing/replacing nodes (#4559)
• Remove all information about a node from the network cache when it is replaced or removed. This fixes an issue where sleeping nodes would be sent to sleep during S2 bootstrapping if they replaced another sleeping node (#4561)

Config file changes

• Add separate config for MP22ZD, restore MP22Z (#4536)
• Add undocumented param to Eaton RF9501 & RF9540 (#4556)
• Add RaZberry 7 Pro (#4556)

Changes under the hood

• Restructured the Serial API commands so they more closely resemble the structure of the Host API specification. Separated enums and types from the implementation of Serial API commands (#4528)
• Updated several dependencies

9.0.7 (2022-04-29)

Bugfixes

• Fixed an issue where Color Switch CC Set V2 could contain a random duration value (#4526)

Config file changes

• Add KP-SW-07 and KP-SW-08 Keemple Wall Switches (#4503)
• Add missing parameters to Zooz ZEN30 (#4510)
• Add config for Zooz ZEN51 and ZEN52 Smart Relays (#4262)
• Add conditional warnings to devices with known buggy firmware ranges, fix x.y.z version support (#4515)
• Add temp and humidity calibration params to Aeotec aërQ ZWA039 (#4516)
• Convert ADC-T2000 temperature values to partial parameters (#4522)

Changes under the hood

• Improved some auto-generated argument checks (#4519)
• All CC specific enums and types were moved into a single file, so they can be imported from non-Node.js contexts (#4525)

9.0.6 (2022-04-27)

Bugfixes

• Convert some exports from type-only to value (#4512)

9.0.5 (2022-04-26)

Bugfixes

• When converting an NVM, missing routing information is now ignored instead of throwing an error (#4509)
• Fixed serial disconnect detection during usage (#4505)

Config file changes

• Add ABUS SHLM10000 (#4498)
• Enable Basic Set mapping for Eaton RF9542-Z (#4507)
• Force scene count of Leviton VRCS2 to 4 (#4504)

Changes under the hood

• More device config file properties now support conditionals (#4501)

9.0.4 (2022-04-22)

Bugfixes

• Route health checks now approach the minimum power level linearly from the normal power to avoid nodes with a suboptimal implementation getting stuck in test mode and causing a wrong test result (#4494)
• For Door Lock CC V3 and below, the lock/bolt/latch sensors are now created again, since support cannot be tested in these versions (#4490)
• The initial connection to a TCP socket is now retried if the connection cannot be established immediately (#4492)

Changes under the hood

• Expose "safe" entrypoint in each package which can be used from non-Node.js contexts (#4469)

9.0.3 (2022-04-20)

Bugfixes

• Fixed an issue where version based feature testing of 500 series controllers with support for the GetProtocolVersion API would fail
• Fixed an issue causing certain unsolicited messages like Notification CC Reports not to be processed while an API command was ongoing

Config file changes

• Treat Basic Set as event for Philio PSR03-B (#4487)
• Treat Basic Set as event for Philio PSR03-A (#4488)
• Add metadata to Shenzhen Heiman HS1SA-Z (#4244)
• Add Nexia One Touch NX1000 (#4231)
• Add Minoston Outdoor Plug Dimmer MP22ZD (#4342)
• Add Cherubini Ora ZRX (#4463)
• Add param 92 (Battery Calibration Check) to aërQ v2.01 (#4472)

9.0.2 (2022-04-14)

Bugfixes

• The door/latch/bolt status sensors are no longer created if unsupported by the door lock (#4448)
• Fixed an issue where securityClasses in provisioning entries were returned as strings instead of their enum values (#4462)

Config file changes

• Add metadata to ZooZ ZEN26 (#4348)
• Add metadata to ZooZ ZEN21 (#4349)
• Add metadata to ZooZ ZEN27 (#4347)
• Remove option 4 of LED Indicator Mode for Zooz ZSE40, FW 32.32+ (#4451)
• Extend Heatit TF016 config to include TF021 (#4452)
• Correct valueSize for param 15 on GE/Jasco 26931 / ZW4006 (#4441)
• Add manual to GE/Jasco 26932 / 26933 / ZW3008 (#4446)
• Correct reporting groups for Aeotec ZW132 Dual Nano Switch (#4447)
• Removed the optional min/maxValue from many config files where the values were unnecessary or incorrect (#4455)

Changes under the hood

• Added documentation for the Multilevel Switch CC notifications (#4444)

9.0.1 (2022-04-03)

Bugfixes

• The auto-generated argument validation now considers { prop1: undefined } and {} to be equivalent.

9.0.0 (2022-04-03) · „You had my curiosity. But now you have my attention.”

Roughly nine months after the last major release, we've reached a new milestone. Z-Wave JS is now 4 years old, its usage has more than doubled over the course of the v8.x release line and it is still growing steadily. There are many exciting things yet to come, so stay tuned!

Breaking changes · Migration guide

• The route parameter in SendDataBridgeRequest has been removed, since it isn't supported in any known SDK version (#3741)
• Faster timeout while waiting for a response to a GET request (#3756)
• Renamed properties and methods of the Controller class and related message classes (#3761)
• Converted the isControllerNode method on the ZWaveNode class to a readonly property (#3972)
• (possibly breaking) Upgraded serialport library to version 10.x (#4225)
• The legacy network cache file <homeid>.json was converted to an appendonly .jsonl file in order to prevent data loss (#4263)
• Almost all CC API methods now validate their arguments and will throw if they don't match the expected type (#4405)

Features

• The node statistics now include RSSI and the actual routes taken (LWR, NLWR) for communication (#4022)
• A utility method rssiToString was added to convert RSSI values to a human readable string
• Export some commonly used string formatting utilities (#4318)
• Add support for Irrigation CC (#4270)
• The controller's sdkVersion property now includes the build number (or minor version) if supported (#4355, #4398)
• Also expose sdkVersion on the controller node (#4388)
• Added a compat flag to expose received MultilevelSwitchCCSet commands via the event property (#4282)
• Received MultilevelSwitchCC Start/StopLevelChange commands are now emitted as notifications (#4282)
• Added an sdkVersion property for nodes (#4371)
• LogContext and related types are now exported (#4378)
• Map Basic CC Set to appropriate CCs for devices with Remote Switch device class (#4382)
• User codes and network keys are no longer logged (#4383)

Bugfixes

• Error reporting is now opt-in (#4279) and should no longer force-exit the application when an unhandled rejection occurs (#4291)
• Increase the default controller response timeout to 10s to work around an issue where some 500 series controllers take too long to confirm execution of a SendData command when the target node is unresponsive (#4259)
• Fix parsing of BridgeApplicationCommandRequest that do not contain an RSSI reading (#4337)
• Fixed an issue with automatic clock correction where rounding the time up could lead to the clock being 1 hour late (#4346)
• Notification event parameters containing a UserCodeCC report now correctly indicate the user ID again (#4356)
• Fixed an issue in the NVM migration routine that could lead to nonsensical radio settings which can only be changed by editing the NVM file manually (#4368)
• Prevent infinite loop in health check when the node responds but there is no progress (#4372)
• Route health checks can no longer have sleeping nodes as the target (#4373)
• Lifeline health checks now wait for sleeping nodes to wake up instead of considering the wait time latency (#4376)
• Route health check rounds now indicate when there were zero failed pings (#4377)
• Multi Channel encapsulation now correctly uses V1 commands if this is the highest supported version of a node (#4387)
• The versions of CCs that are not supported by the root device but only endpoints are now correctly queried (#4419)

Config file changes

• Correct device description for Leviton DZMX1 (#4317)
• Add metadata to Zooz ZSE18 (#4338)
• Add metadata to AEON Labs DSB29 (#4334)
• Add metadata to Vision Security GZ8101 (#4350)
• Add metadata to AEON Labs DSC26 (#4343)
• Add metadata to Ecolink DWZWAVE25 (#4339)
• Merge redundant config files for Fibaro Walli Double Switch (#4370)
• Add value 2 to Aeotec ZW100 param 81, FW 1.10-1.12 (#4361)
• Add parameters and correct default values for Fibaro Smart Module FGS214 and Double Smart Module FGS224 (#4345)
• Correct value size for Zooz ZEN20 v2 (#4358)
• Preserve all endpoints for Qubino ZMNKAD1 Luxy Smart Switch (#4366)
• Enable Multilevel Switch event value for Aeotec ZW111 (#4380)
• Add metadata to AEON Labs DSB09 (#4391)
• Correct value for Brightness After Power Failure for LZW31-SN (#4409)
• Add value 3 to param 4 for Zooz Zen16 (#4404)
• Add values for Alarm and Doorbell Sound Selection to Shenzhen Neo Siren Alarm (#4400)

Changes under the hood

• Lots of dependency updates
• We no longer use lerna for monorepo management. It is largely unmaintained and doesn't support yarn's workspace: protocol (#4071)
• The bot now considers zip a valid extension for Z-Wave JS logfiles
• Added missing toLogEntry implementations (#4389)
• Implemented a transformer-based codegen to auto-implement method argument checks based on types (#4394, #4396)
• In VSCode, the project now gets precompiled before running the test script (#4397)