Skip to content

Latest commit

 

History

History
62 lines (44 loc) · 3.54 KB

README.md

File metadata and controls

62 lines (44 loc) · 3.54 KB
Raw

Panasonic Comfort Cloud - HomeAssistant Component

GitHub Release License hacs_badge Integration Usage

This is a custom component to allow control of Panasonic Comfort Cloud devices in HomeAssistant.

Example controls Example sensors Example diagnostics

IMPORTANT

Before installing this integration, you must have completed the 2FA process using the Panasonic Comfort Cloud app.

Features

  • Climate component for Panasonic airconditioners and heatpumps
  • Horizontal swing mode selection
  • Sensors for inside and outside temperature (where available)
  • Switch for toggling Nanoe mode (where available)
  • Switch for toggling ECONAVI mode (where available)
  • Switch for toggling AI ECO mode (where available)
  • Daily energy sensor (optional)
  • Current Power sensor (Calculated from energy reading)
  • Zone controls (where available)

Installation

HACS (recommended)

  1. Install HACS, if you did not already
  2. Open your Home Assistant instance and open a repository inside the Home Assistant Community Store.
  3. Press the Download button
  4. Restart Home Assistant
  5. Open your Home Assistant instance and start setting up a new integration.

Install manually

Clone or copy this repository and copy the folder 'custom_components/panasonic_cc' into '/custom_components/panasonic_cc'

Configuration

Once installed, the Panasonic Comfort Cloud integration can be configured via the Home Assistant integration interface where it will let you enter your Panasonic ID and Password.

Setup

After inital setup, the following options are available:

Setup

Known issues

  • The authentication process can be fiddly and may require resetting the MFA by logging in / out from the Panasonic app.

Support Development