-
Notifications
You must be signed in to change notification settings - Fork 20
/
eversolar.ini
74 lines (63 loc) · 4.11 KB
/
eversolar.ini
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
[options]
query_inverter_secs = 50 # how often to request data from the inverter and write to log file
debug = 1 # Debug level , 0 = none, 1 is high priority, 3 is everything, 4 also output packets sent to and received from the inverter
log_file = "/var/log/eversolar" # make sure the user executing the script can write to this file
output_to_log = 1 # 1 = output to the above logfile, 0 do not
clean_log = 0 # Cleanup log file every month, 0 = disable, 1 = enabled (default)
communication_method = "serial" # "eth2ser" or "serial". defines wether you are using an ethernet to serial converter to connect to the inverter, or just a serial port
strings = 1 # number of PV panel strings (panels wired together) connected to your inverter. 1 or 2 supported.
[eth2ser] # communication_method must be set to "eth2ser" above for ethernet to serial devices
ip_address = "192.168.2.1"
port = 23
[serial] # communication_method must be set to "serial" above for serial comms
port = "/dev/ttyUSB0"
[pvlog] # upload generation to pv-log.com
enabled = 1
FTPServeradresse = "ftp.pv-log.com"
interval = 1 # 5 minutes, interval between logs - beware, pv-log is sluggish and only updates once per hour
username = "idxxxx" # taken from pv-log settings
Password = "0hxxxxx"
[pvoutput] # upload generation to pvoutput.org
enabled = 1
api_key = "99ccfxxxxxxxxxxxxxxxxxxxxxxxxxxx2"
status_interval_mins = 5 # 5 or 10 minutes, depending on your pvoutput.org setting
add_status_url = "http://pvoutput.org/service/r2/addstatus.jsp"
# duplicate the next line if you have multiple inverters and replace the serial numbers with your inverter serial numbers and the matching pvoutput system ids
system_id B882000A127D0 = 99999 # system_id inverter_serial_number = pvoutput_system_id
system_id B882000A127D0 = 99998 # system_id inverter_serial_number = pvoutput_system_id
[domoticz] # upload to Domoticz home automation server (more information: https://www.domoticz.com)
enabled = 0
address = "x.x.x.x" # Domoticz server ip. Can be localhost when running this script on the same system as this script.
port = 8080 # Domoticz port (8080 is default)
username = "xx" # Domoticz username
password = "xx" # Domoticz password
IDX = xxx # virtual sensor IDX number. This can be found on the Domoticz hardware page.
[influxdb] # upload data to InfluxDB - a time series database
enabled = 0
address = "x.x.x.x" # InfluxDB server ip of host
port = 8086 # InfluxDB server port
dbname = "solar" # InfluxDB database name to store data
panelname = "panel1" # Name of the panels
[mqtt] # Publish data to Mqtt Broker (Auto Discovery based on Home Assistant)
enabled = 0 # Enable mqtt (0 or 1)
inverter_model = "" # Name of the device (Optional) eg.: ZL2000S
host = "127.0.0.1" # Mqtt Broker Ip (Required, 127.0.0.1 is if Eversolar Monitor is on same computer as Home Assistant)
port = 1883 # Mqtt Broker port (1883 or 8883) (Required)
enable_pass = 1 # Enable password authentication (0 or 1)
user = "username" # Mqtt broker authentication username (Optional)
password = "supersecretpassword" # Mqtt broker authentication password (Optional)
topic_prefix = "eversolar-monitor" # Mqtt topic prefix (Required)
ha_discovery = 1 # Enable home assistant auto discovery mqtt (0 or 1)(Optional)
[seg] # upload generation to smartenergygroups.com
enabled = 0
upload_interval_mins = 1
site_id = "site_1234abcd"
device = "solar" # device name
power_stream = "p" # stream name for power stream
energy_stream = "e" # stream name for energy stream
api_url = "http://api.smartenergygroups.com/api_sites/stream"
[web_server]
enabled = 1
port = 3837
[database]
log = 1 # Enable or disable local SQLite logging. Lots of writes can corrupt SD cards