forked from Arduino-IRremote/Arduino-IRremote
-
Notifications
You must be signed in to change notification settings - Fork 0
/
SendRawDemo.ino
120 lines (105 loc) · 6.43 KB
/
SendRawDemo.ino
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
/*
* SendRawDemo.cpp - demonstrates sending IR codes with sendRaw
*
* This example shows how to send a RAW signal using the IRremote library.
* The example signal is actually a 32 bit NEC signal.
* Remote Control button: LGTV Power On/Off.
* Hex Value: 0x20DF10EF, 32 bits
*
* If it is a supported protocol, it is more efficient to use the protocol send function
* (here sendNEC) to send the signal.
*
* This file is part of Arduino-IRremote https://github.com/Arduino-IRremote/Arduino-IRremote.
*
************************************************************************************
* MIT License
*
* Copyright (c) 2020-2022 Armin Joachimsmeyer
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is furnished
* to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
* INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
* PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
* CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
* OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
************************************************************************************
*/
#include <Arduino.h>
#define DISABLE_CODE_FOR_RECEIVER // Disables restarting receiver after each send. Saves 450 bytes program memory and 269 bytes RAM if receiving functions are not used.
//#define SEND_PWM_BY_TIMER // Disable carrier PWM generation in software and use (restricted) hardware PWM.
//#define USE_NO_SEND_PWM // Use no carrier PWM, just simulate an active low receiver signal. Overrides SEND_PWM_BY_TIMER definition
//#define NO_LED_FEEDBACK_CODE // Saves 566 bytes program memory
//#define USE_OPEN_DRAIN_OUTPUT_FOR_SEND_PIN // Use or simulate open drain output mode at send pin. Attention, active state of open drain is LOW, so connect the send LED between positive supply and send pin!
#include "PinDefinitionsAndMore.h" // Define macros for input and output pin etc.
#include <IRremote.hpp>
void setup() {
pinMode(LED_BUILTIN, OUTPUT);
Serial.begin(115200);
#if defined(__AVR_ATmega32U4__) || defined(SERIAL_PORT_USBVIRTUAL) || defined(SERIAL_USB) /*stm32duino*/|| defined(USBCON) /*STM32_stm32*/|| defined(SERIALUSB_PID) || defined(ARDUINO_attiny3217)
delay(4000); // To be able to connect Serial monitor after reset or power up and before first print out. Do not wait for an attached Serial Monitor!
#endif
// Just to know which program is running on my Arduino
Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_IRREMOTE));
Serial.println(F("Send IR signals at pin " STR(IR_SEND_PIN)));
IrSender.begin(); // Start with IR_SEND_PIN as send pin and enable feedback LED at default feedback LED pin
}
/*
* NEC address=0xFB0C, command=0x18
*
* This is data in byte format.
* The uint8_t/byte elements contain the number of ticks in 50 us.
* The uint16_t format contains the (number of ticks * 50) if generated by IRremote,
* so the uint16_t format has exact the same resolution but requires double space.
* With the uint16_t format, you are able to modify the timings to meet the standards,
* e.g. use 560 (instead of 11 * 50) for NEC or use 432 for Panasonic. But in this cases,
* you better use the timing generation functions e.g. sendNEC() directly.
*/
const uint8_t rawDataP[]
#if defined(__AVR__)
PROGMEM
#endif
= { 180, 90 /*Start bit*/, 11, 11, 11, 11, 11, 34, 11, 34/*0011 0xC of 16 bit address LSB first*/, 11, 11, 11, 11, 11, 11, 11,
11/*0000*/, 11, 34, 11, 34, 11, 11, 11, 34/*1101 0xB*/, 11, 34, 11, 34, 11, 34, 11, 34/*1111*/, 11, 11, 11, 11, 11, 11, 11,
34/*0001 0x08 of command LSB first*/, 11, 34, 11, 11, 11, 11, 11, 11/*1000 0x01*/, 11, 34, 11, 34, 11, 34, 11,
11/*1110 Inverted 8 of command*/, 11, 11, 11, 34, 11, 34, 11, 34/*0111 inverted 1 of command*/, 11 /*stop bit*/};
void loop() {
#if !(defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__))
/*
* Send hand crafted data from RAM
* The values are NOT multiple of 50, but are taken from the NEC timing definitions
*/
Serial.println(F("Send NEC 16 bit address=0xFB04 and command 0x08 with exact timing (16 bit array format)"));
Serial.flush();
const uint16_t rawData[] = { 9000, 4500/*Start bit*/, 560, 560, 560, 560, 560, 1690, 560,
560/*0010 0x4 of 16 bit address LSB first*/, 560, 560, 560, 560, 560, 560, 560, 560/*0000*/, 560, 1690, 560, 1690, 560,
560, 560, 1690/*1101 0xB*/, 560, 1690, 560, 1690, 560, 1690, 560, 1690/*1111*/, 560, 560, 560, 560, 560, 560, 560,
1690/*0001 0x08 of command LSB first*/, 560, 560, 560, 560, 560, 560, 560, 560/*0000 0x00*/, 560, 1690, 560, 1690, 560,
1690, 560, 560/*1110 Inverted 8 of command*/, 560, 1690, 560, 1690, 560, 1690, 560, 1690/*1111 inverted 0 of command*/,
560 /*stop bit*/}; // Using exact NEC timing
IrSender.sendRaw(rawData, sizeof(rawData) / sizeof(rawData[0]), NEC_KHZ); // Note the approach used to automatically calculate the size of the array.
delay(1000); // delay must be greater than 5 ms (RECORD_GAP_MICROS), otherwise the receiver sees it as one long signal
#endif
/*
* Send byte data direct from FLASH
* Note the approach used to automatically calculate the size of the array.
*/
Serial.println(F("Send NEC 16 bit address 0xFB0C and data 0x18 with (50 us) tick resolution timing (8 bit array format) "));
Serial.flush();
IrSender.sendRaw_P(rawDataP, sizeof(rawDataP) / sizeof(rawDataP[0]), NEC_KHZ);
delay(1000); // delay must be greater than 5 ms (RECORD_GAP_MICROS), otherwise the receiver sees it as one long signal
Serial.println(F("Send NEC 16 bit address 0x0102, 8 bit data 0x34 with generated timing"));
Serial.flush();
IrSender.sendNEC(0x0102, 0x34, 0);
delay(3000);
}