KTRW

This fork of KTRW brings support for A11 devices running iOS 14.x, as well as a built-in patchfinder so you do not have to hunt for kernel offsets yourself.

KTRW is an iOS kernel debugger for devices with an A11 SoC, such as the iPhone 8. It demonstrates how to use debug registers present on these devices to bypass KTRR, remap the kernel as writable, and load a kernel extension that implements a GDB stub, allowing full-featured kernel debugging with LLDB or IDA Pro over a standard Lightning to USB cable.

With the release of the checkra1n jailbreak and pongoOS pre-boot environment, it is possible to load KTRW as a kernel extension directly into the iOS kernelcache, so the original KTRR bypass is no longer used.

Changes for iOS 14.x

1. OSKext_init_patch MAX_SEARCH changed to 300 instead of 30 so the patch is actually applied
2. CTRR/KTRR patches from xnuspy were shoved in
3. OSKext::slidePrelinkedExecutable zeroes vmaddr, so it needs to be patched to not do that
4. Need to actually slide all segments' vmaddr inside kext_map (inside the pongo module)

I suspect the last two are a result of me not understanding some changes made to the XNU kext loading code, but as asm patches they work fine so I don't see the need to spend more time on that.

Bypassing KTRR

KTRR was introduced with the A10 as a means of locking down critical kernel data (including all executable code) to prevent it from being modified, even by an attacker with a kernel memory read/write capability. However, on A11 SoCs, the ARMv8 External Debug registers and a proprietary register called DBGWRAP were left enabled. This makes it possible to subvert execution of the reset vector on these devices, skipping the MMU's KTRR initialization and setting a custom page table base that remaps the kernel as writable. Once KTRR has been disabled, it becomes possible to execute dynamically loaded kernel code, i.e., load kernel extensions.

Note that even though the kernel is remapped as writable, the physical pages spanned by the AMCC RoRgn remain protected by the memory controller, and thus writes to these physical pages will be discarded. Bypassing KTRR on the MMU does not defeat KTRR on the AMCC, and thus the only way to remap the kernel as writable is to copy the kernel data in the AMCC RoRgn onto new, writable physical pages. But since the AMCC is still protecting the original physical pages, and since the reset vector executes from a physical address inside the AMCC RoRgn, the reset vector cannot be persistently modified to disable KTRR automatically on reset without a more powerful capability (such as a bootchain vulnerability). Thus, the KTRR bypass will disappear once the core resets normally (that is, without being hijacked using the debug registers from another core). This means that the KTRR bypass is not persistent: it will be lost once the device sleeps.

Using this fork of KTRW

This fork is meant specifically for devices on iOS 14+. If you want to debug iOS 13.x or below, please use the original repository.

KTRW consists of four components: the pongo_kext_loader utility, the kextload.pongo-module pongoOS module, the ktrw_gdb_stub.ikext kernel extension, and the ktrw_usb_proxy USB-to-TCP proxy utility. These can be built individually by running make in each subdirectory or collectively by running make in the top-level directory.

This fork does not support loading of arbitrary kernel extensions. If you need that functionality, please use the original repository.

To use KTRW, we'll run three utilities: checkra1n, pongo_kext_loader, and ktrw_usb_proxy.

pongo_kext_loader will upload the kextload module. That will run a patchfinder, "insert" the KTRW kext into the kernelcache, and boot XNU.

Checkra1n uses the checkm8 SecureROM exploit to establish a pre-boot environment called pongoOS capable of loading arbitrary code modules and patching the kernel. Running the following command causes checkra1n to listen for attached iOS devices in DFU mode and boot pongoOS:

$ /Applications/checkra1n.app/Contents/MacOS/checkra1n -c -p

Run the following command to have pongo_kext_loader load ktrw_gdb_stub.ikext on the iOS device at boot:

$ pongo_kext_loader/pongo_kext_loader \
    -l pongo_kextload/kextload.pongo-module \
    -k ktrw_gdb_stub/ktrw_gdb_stub.ikext

The final utility that needs to run is ktrw_usb_proxy. ktrw_usb_proxy is needed to communicate with the kernel extension over USB and relay the data over TCP so that LLDB can connect to it. It will print the data being exchanged over the connection to stdout. Run ktrw_usb_proxy with the port number LLDB will connect to:

$ ktrw_usb_proxy/ktrw_usb_proxy 39399

Finally, connect an iOS device using a USB cable and enter DFU mode. First checkra1n will boot pongoOS, then pongo_kext_loader will insert the KTRW GDB stub kernel extension, and finally XNU will boot. The GDB stub will start running about 30 seconds after the kernel starts booting to give the system time to initialize. (This delay can be configured during build using the ACTIVATION_DELAY make variable.)

Once the GDB stub runs, it will claim one CPU core for itself and halt the remaining cores. It will also hijack the Synopsys USB 2.0 OTG controller from the kernel so that it can communicate with the host. As a result, the host will not see the iPhone as an iOS device and the phone (once it has been resumed) will not be able to send data over USB as normal.

At this point, you are ready to debug the device.

A few common issues:

• If you're having trouble entering DFU mode using a USB C cable, try using a USB A cable instead.
• If the device immediately panics when the GDB stub starts to run, the issue may be that the USB hardware is not yet powered. This is likely to be the case if the device has a passcode and the "USB Accessories" setting is disabled to prevent USB accessories from connecting when the device is locked. Either disabling the passcode, allowing USB accessories, or unlocking the device before the GDB stub starts should solve the issue. Try changing ACTIVATION_DELAY if you need more time to unlock the device.
• Similarly, do not unplug the device while KTRW is running, as this powers down the USB hardware.
• If LLDB does not automatically detect that the target is an iOS kernelcache, it's possible that the system halted while a CPU core was in userspace. Try continuing and re-interrupting the target until all CPU cores are running in kernel mode, then reattach to the target.
• Sometimes the screen becomes unresponsive right after connecting LLDB. I have been unable to identify/fix the root cause of this issue, but it seems to help if you connect with LLDB as soon as the GDB stub first halts the device, then immediately continue to minimize the amount of time the system is stopped during this initial halt.
• KTRW is incompatible with on-device debugging, e.g. using Xcode or debugserver to debug a process on the device.
• The pongoOS kernel extension loading module currently has several limitations: it will only work on new-style kernelcaches and only one kernel extension can be inserted into the kernelcache.

The method described here has been tested as working on iOS 13.3. Prior versions of KTRW used a KTRR bypass to load kernel extensions rather than relying on checkra1n; ktrw_kext_loader implements this technique, and it should be used instead when debugging iOS 12.

Debugging with LLDB

Use LLDB to connect to ktrw_usb_proxy and communicate with ktrw_gdb_stub.ikext. Here I have connected to an iPhone 8 running iOS 12.1.2:

$ lldb kernelcache.iPhone10,1.16C101
(lldb) target create "kernelcache.iPhone10,1.16C101"
Current executable set to 'kernelcache.iPhone10,1.16C101' (arm64).
(lldb) settings set plugin.dynamic-loader.darwin-kernel.load-kexts false
(lldb) gdb-remote 39399
Kernel UUID: 94463A80-7B38-3176-8872-0B8E344C7138
Load Address: 0xfffffff027e04000
Kernel slid 0x20e00000 in memory.
Loaded kernel file kernelcache.iPhone10,1.16C101
Process 2 stopped
Target 0: (kernelcache.iPhone10,1.16C101) stopped.
(lldb)

You can use thread list to list the code running on each physical CPU core. (Note that one core is reserved for the debugger itself, so it will not show up in the list.)

(lldb) th l
Process 2 stopped
* thread #1: tid = 0x0002, 0xfffffff027ffda18 kernelcache.iPhone10,1.16C101`___lldb_unnamed_symbol1734$$kernelcache.iPhone10,1.16C101 + 272
  thread #2: tid = 0x0003, 0xfffffff027ffda18 kernelcache.iPhone10,1.16C101`___lldb_unnamed_symbol1734$$kernelcache.iPhone10,1.16C101 + 272
  thread #3: tid = 0x0004, 0xfffffff027ffda18 kernelcache.iPhone10,1.16C101`___lldb_unnamed_symbol1734$$kernelcache.iPhone10,1.16C101 + 272
  thread #4: tid = 0x0005, 0xfffffff027ffda18 kernelcache.iPhone10,1.16C101`___lldb_unnamed_symbol1734$$kernelcache.iPhone10,1.16C101 + 272
  thread #5: tid = 0x0006, 0xfffffff027ffda18 kernelcache.iPhone10,1.16C101`___lldb_unnamed_symbol1734$$kernelcache.iPhone10,1.16C101 + 272
(lldb)

Because KTRR has been disabled, it is possible to patch kernel memory:

(lldb) x/12wx 0xfffffff027e04000
0xfffffff027e04000: 0xfeedfacf 0x0100000c 0x00000000 0x00000002
0xfffffff027e04010: 0x00000016 0x00001068 0x00200001 0x00000000
0xfffffff027e04020: 0x00000019 0x00000188 0x45545f5f 0x00005458
(lldb) mem wr -s 4 0xfffffff027e04000 0x11223344 0x55667788
(lldb) x/12wx 0xfffffff027e04000
0xfffffff027e04000: 0x11223344 0x55667788 0x00000000 0x00000002
0xfffffff027e04010: 0x00000016 0x00001068 0x00200001 0x00000000
0xfffffff027e04020: 0x00000019 0x00000188 0x45545f5f 0x00005458

Resume executing the kernel with continue. You can interrupt it at any time with ^C:

(lldb) c
Process 2 resuming
(lldb) ^C
Process 2 stopped
Target 0: (kernelcache.iPhone10,1.16C101) stopped.
(lldb)

You can set breakpoints as usual. KTRW currently only supports hardware breakpoints, but LLDB will automatically detect this and set the appropriate breakpoint type:

(lldb) b 0xfffffff0282753b4
Breakpoint 1: where = kernelcache.iPhone10,1.16C101`___lldb_unnamed_symbol4960$$kernelcache.iPhone10,1.16C101, address = 0xfffffff0282753b4
(lldb) c
Process 2 resuming
Process 2 stopped
* thread #4, stop reason = breakpoint 1.1
    frame #0: 0xfffffff0282753b4 kernelcache.iPhone10,1.16C101`___lldb_unnamed_symbol4960$$kernelcache.iPhone10,1.16C101
kernelcache.iPhone10,1.16C101`___lldb_unnamed_symbol4960$$kernelcache.iPhone10,1.16C101:
->  0xfffffff0282753b4 <+0>:  sub    sp, sp, #0x80             ; =0x80
    0xfffffff0282753b8 <+4>:  stp    x28, x27, [sp, #0x20]
    0xfffffff0282753bc <+8>:  stp    x26, x25, [sp, #0x30]
    0xfffffff0282753c0 <+12>: stp    x24, x23, [sp, #0x40]
Target 0: (kernelcache.iPhone10,1.16C101) stopped.
(lldb)

Single-stepping works as expected:

(lldb) si
Process 2 stopped
* thread #4, stop reason = instruction step into
    frame #0: 0xfffffff0282753b8 kernelcache.iPhone10,1.16C101`___lldb_unnamed_symbol4960$$kernelcache.iPhone10,1.16C101 + 4
kernelcache.iPhone10,1.16C101`___lldb_unnamed_symbol4960$$kernelcache.iPhone10,1.16C101:
->  0xfffffff0282753b8 <+4>:  stp    x28, x27, [sp, #0x20]
    0xfffffff0282753bc <+8>:  stp    x26, x25, [sp, #0x30]
    0xfffffff0282753c0 <+12>: stp    x24, x23, [sp, #0x40]
    0xfffffff0282753c4 <+16>: stp    x22, x21, [sp, #0x50]
Target 0: (kernelcache.iPhone10,1.16C101) stopped.
(lldb) si
Process 2 stopped
* thread #4, stop reason = instruction step into
    frame #0: 0xfffffff0282753bc kernelcache.iPhone10,1.16C101`___lldb_unnamed_symbol4960$$kernelcache.iPhone10,1.16C101 + 8
kernelcache.iPhone10,1.16C101`___lldb_unnamed_symbol4960$$kernelcache.iPhone10,1.16C101:
->  0xfffffff0282753bc <+8>:  stp    x26, x25, [sp, #0x30]
    0xfffffff0282753c0 <+12>: stp    x24, x23, [sp, #0x40]
    0xfffffff0282753c4 <+16>: stp    x22, x21, [sp, #0x50]
    0xfffffff0282753c8 <+20>: stp    x20, x19, [sp, #0x60]
Target 0: (kernelcache.iPhone10,1.16C101) stopped.
(lldb)

Watchpoints are also supported:

(lldb) wa s e -s 8 -w read_write -- 0xfffffff027e04000
Watchpoint created: Watchpoint 1: addr = 0xfffffff027e04000 size = 8 state = enabled type = rw
    new value: 6153737367135073092
(lldb) reg w x1 0xfffffff027e04000
(lldb) c
Process 2 resuming

Watchpoint 1 hit:
old value: 6153737367135073092
new value: 6153737367135073092
Process 2 stopped
* thread #5, stop reason = watchpoint 1
    frame #0: 0xfffffff028275418 kernelcache.iPhone10,1.16C101`___lldb_unnamed_symbol4960$$kernelcache.iPhone10,1.16C101 + 100
kernelcache.iPhone10,1.16C101`___lldb_unnamed_symbol4960$$kernelcache.iPhone10,1.16C101:
->  0xfffffff028275418 <+100>: and    x21, x9, x10
    0xfffffff02827541c <+104>: add    x10, x11, x10
    0xfffffff028275420 <+108>: add    x8, x10, w8, sxtw
    0xfffffff028275424 <+112>: and    x26, x9, x8
Target 0: (kernelcache.iPhone10,1.16C101) stopped.
(lldb) x/4i $pc-8
    0xfffffff028275410: 0x9360fd29   asr    x9, x9, #32
    0xfffffff028275414: 0xa9402eea   ldp    x10, x11, [x23]
->  0xfffffff028275418: 0x8a0a0135   and    x21, x9, x10
    0xfffffff02827541c: 0x8b0a016a   add    x10, x11, x10
(lldb) reg r x23 x10 x11
     x23 = 0xfffffff027e04000
     x10 = 0x5566778811223344
     x11 = 0x0000000200000000
(lldb)

LLDB limits watchpoints to 1, 2, 4, or 8 bytes in size, even though the hardware supports even larger watchpoints.

Debugging with IDA Pro

It is possible to use IDA Pro 7.3 or later for iOS kernel debugging, but there are some notable limitations prior to IDA Pro 7.5.

On IDA Pro 7.3 and 7.4, you will need to modify dbg_xnu.cfg to add support for the KTRW GDB stub's target.xml features. You can find the required changes in misc/dbg_xnu.cfg.patch. I also recommend setting up KDK_PATH to point to a directory containing copies of any kernelcaches you will be debugging to reduce the amount of memory IDA downloads off the device. You will also need to be sure to always use hardware breakpoints rather than software breakpoints, which are currently unsupported.

KTRW should work out of the box with IDA Pro 7.5.

Open the kernelcache corresponding to the device in IDA Pro, select the remote XNU debugger, and connect to the port on which ktrw_usb_proxy is listening. You should see IDA rebase the kernelcache and start downloading data off the device. This may take a long time to complete.

Adding support for new platforms

This fork of KTRW contains a patchfinder for iOS 14.x. You do not have to find any offsets yourself (they will be found when the module runs inside pongoOS)

Breakpoints and watchpoints

KTRW currently uses hardware breakpoints and watchpoints. The hardware supports 6 breakpoints and 4 watchpoints, which should be sufficient for most basic debugging tasks. It is possible to add support for software breakpoints.

Dynamic code generation

Currently, LLDB automatically disables dynamic code generation when debugging Darwin kernels without testing whether or not the feature is supported, which breaks the ability to call kernel functions from within LLDB.

As a workaround, you can build LLDB from source and comment out the line process->SetCanRunCode(false) from DynamicLoaderDarwinKernel.cpp. This will allow you to run call and expression commands in LLDB that are evaluated in the iOS kernel.

Debugging the reset vector

While it is possible to use the CoreSight External Debug registers to debug execution of the reset vector before the MMU has been enabled, this use case is not supported by KTRW. The main reason is that KTRW disables core resets while the device is plugged in and active (i.e. not sleeping) anyway in order to make the KTRR bypass partially persistent.

A note on security and safety

Do not run KTRW on your personal iPhone: only run it on a dedicated research device that you do not mind permanently damaging. KTRW expects the kernel task port to be exposed to unprivileged applications, which critically compromises the system's security. Additionally, KTRW operates by running a debugger on a single core that never sleeps, which consumes a lot of power and generates excessive heat that could permanently damage the device or cause physical burns.

---

Developed and maintained by Brandon Azad of Google Project Zero, [email protected]