The configuration is stored in doorbell\config.h. If file doesn't exist copy doorbell\config_template.h and adopt to your needs.
| Define |
Description |
HOSTNAME |
Hostname used for WIFI, OTA and MQTT |
WIFI_SSID |
WIFI ssid to which the ESP should connect |
WIFI_PASS |
WIFI password used to connect to WIFI_SSID |
OTA_PASSWORT |
Password used for over the air updates from Arduino IDE |
| Define |
Description |
MQTT_SERVER |
IP of the MQTT server to which the ESP should connect |
MQTT_PORT |
Port of the MQTT server to which the ESP should connect (typically 1883) |
MQTT_USER |
Username used to connect to the MQTT server |
MQTT_PASSWORD |
Password used to connect to the MQTT server |
BELL_ACTION_CONTENT |
Text which will be published on Button press event |
| Define |
Description |
SIP_IP |
IP of the SIP server to which the ESP should connect |
SIP_PORT |
Port of the SIP server to which the ESP should connect (typically 5060) |
SIP_USER |
Username used to connect to the SIP server |
SIP_PASSWORD |
Password used to connect to the SIP server |
SIP_DIAL_NR1 |
Phone number which should be dialed when button 1 is pressed (typically "11") |
SIP_DIAL_NR2 |
Phone number which should be dialed when button 2 is pressed (typically "12") |
SIP_DIAL_DIGIT |
Digit which, when received, opens the doorlock |
SIP_MAX_DAIL_TIME |
Maximum time after which an unanswered call is terminated |
| Define |
Description |
BUTTON_DEBOUNCE_TIME |
Debounce time for button inputs |
BUTTON_ACTION_TIME |
Time after which the corresponding output, if configured, gets deactivated |
DOOR_UNLOCKED_TIME |
Time for which the door is open after unlocked via MQTT or SIP |
Combine the following defines by ORing to configure your individual setup. The defines can be found in doorbell.ino.
| Define |
Description |
SIP1_ENABLED |
Button 1 dails SIP_DIAL_NR1 |
SIP2_ENABLED |
Button 2 dails SIP_DIAL_NR2 |
CHIME1_ENABLED |
Button 1 activates chime 1 (OUT3) for BUTTON_ACTION_TIME |
CHIME2_ENABLED |
Button 2 activates chime 2 (OUT4) for BUTTON_ACTION_TIME |
SIPLOCK_ENABLED |
Unlock door (OUT3) when SIP_DIAL_DIGIT is received via SIP |
MQTTLOCK_ENABLED |
Unlock door (OUT3) when corresponding command is received via MQTT |
MQTTBELL1_ENABLED |
Button 1 publishes device trigger to corresponding MQTT topic |
MQTTBELL2_ENABLED |
Button 2 publishes device trigger to corresponding MQTT topic |
MQTTBUTTON1_ENABLED |
Button 1 can be enabled/disabled via MQTT |
MQTTBUTTON2_ENABLED |
Button 2 can be enabled/disabled via MQTT |
Example:
#define DEVICE_CONFIG (SIP1_ENABLED|SIPLOCK_ENABLED|MQTTLOCK_ENABLED|MQTTBELL1_ENABLED|MQTTBUTTON1_ENABLED)