CHANGELOG.md

Change Log

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog and this project adheres to Semantic Versioning.

Unreleased - ReleaseDate

Fixed

• Use the right addresses for signature module structs on f7x2, f7x3, and f730 devices

0.8.0 - 2024-08-02

Changed

• Updated stm32f7 dependency 0.14.0 -> 0.15
  • Use PascalCase for generated values of enums (stm32-rs#727)
• Updated synopsys-usb-otg dependency 0.2.3 -> 0.4.0
• Updated stm32-fmc dependency 0.2.0 -> 0.3
• Added Interruptable trait to Alternate mode pins
• Added a "low pin count" variant of the f730 chip to the crate features: packages <144 pins don't include a high speed USB PHY
• Added SPI2_SCK pin for stm32f769i-discovery
• Fix mass-erase triggering in flash on smaller chips
• Remove the need for software u64 division in the clock setup code, shrinking code (#211)
• Updated cortex-m dependency 0.7.4 -> 0.7.7
• Updated nb dependency 1.0 -> 1.1.0
• Updated micromath dependency 2.0 -> 2.1.0
• Updated fugit dependency 0.3.5 -> 0.3.7
• Updated bitflags dependency 1.3.2 -> 2.6.0
• Updated embedded-hal dependency 0.2.3 -> 0.2.7
• Updated display-interface dependency 0.4.1 -> 0.5.0
• Updated cortex-m-semihosting development dependency 0.3.3 -> 0.5.0
  • Removed unwrap from the end of hprintln / hprint for new version of semihosting
• Updated panic-semihosting development dependency 0.5.2 -> 0.6.0
• Updated embedded-graphics development dependency 0.6.1 -> 0.6.2
• Updated usb-device development dependency 0.2.5 -> 0.3.2
• Updated usbd-serial development dependency 0.1.0 -> 0.2.2
  • Updated usb serial example to use new api
• Renamed .cargo/config -> .cargo/config.toml

v0.7.0 - 2022-06-05

Added

• Support for flash on bigger chips (#168)
• Implement IndependentWatchdog for the IWDG peripheral (#180)
• Implement embedded-hal 0.2 features for gpio and timer (#176)
• Support for different number of data and parity bits for UART (#181/#182)
• Support for PWM, counter, monotonic on timers (#179)
• Examples:
  • Basic use of the PWM (#179)
  • Basic use of the RTC (#159)
  • Blinking a LED using a delay from a timer source (#179)
  • Blinking a LED from within a timer interrupt (#179)
  • Blinking a LED from RTIC using a timer as monotonic source (#179)
  • Scanning I2C devices (#155)
  • Generating a sine wave using PWM (#179)
  • Using bit parity on UART (#182)
  • Using a timer using nb::block!() (#179)
  • Using the system timer using nb::block!() (#179)

Changed

• Renamed master branch to main Updating a local clone after a branch name changes
• Split GetBusFreq on BusClock & BusTimerClock, use &Clock everywhere (#178)
• Use fugit-based time types instead of embedded-time (#177)
• Update gpios: add DynamicPin, add default modes, reexport pins, resort generics, etc (#176)
• Improved RCC infrastructure (#152)
• RTC support has been rewritten (#159/#160/162)
• Bump bxcan dependency version (#158)
• Removed rustfmt checks on CI (#184)

Fixed

• Fix RAM address and add ITCM and DTCM sections (#156)
• Fix default mode for debug pins (#166)
• Use BitsPerSeconds instead of BytesPerSecond in the serial baud rate configuration (#175)

v0.6.0 - 2021-11-02

v0.5.0 - 2021-09-22

v0.4.0 - 2021-07-16

v0.3.0 - 2021-04-26

v0.2.0 - 2020-07-01

[v0.1.0] - 2019-11-05