Skip to content

Latest commit

 

History

History
1003 lines (784 loc) · 35.8 KB

README.md

File metadata and controls

1003 lines (784 loc) · 35.8 KB
Raw

fast_testing packaging publish

A collection of persistent queue implementations for Tarantool

Table of contents

Queue types

fifo - a simple queue

Features:

  • If there is only one consumer, tasks are scheduled in strict FIFO order.
  • If there are many concurrent consumers, FIFO order is preserved on average, but is less strict: concurrent consumers may complete tasks in a different order.

The following options can be specified when creating a fifo queue:

  • temporary - boolean - if true, the contents do not persist on disk (the queue is in-memory only)
  • if_not_exists - boolean - if true, no error will be returned if the tube already exists
  • on_task_change - function name - a callback to be executed on every operation; the expected function syntax is function(task, stats_data), where stats_data is the operation type, and task is normalized task data. NOTE: It's better to use :on_task_change() function.

fifo queue does not support:

  • task priorities (pri)
  • task time to live (ttl)
  • task time to execute (ttr)
  • delayed execution (delay)

Example:

-- add a log record on task completion
local function otc_cb(task, stats_data)
    if stats_data == 'delete' then
        log.info("task %s is done", task[1])
    end
end

queue.create_tube('tube_name', 'fifo', {temporary = true, on_task_change = otc_cb})
queue.tube.tube_name:put('my_task_data_1')
queue.tube.tube_name:put('my_task_data_2')

In the example above, the otc_cb function will be called 2 times, on each task completion. Values for the callback arguments will be taken from the queue.

fifottl - a simple priority queue with support for task time to live

The following options can be specified when creating a fifottl queue:

  • temporary - boolean - if true, the contents of the queue do not persist on disk
  • if_not_exists - boolean - if true, no error will be returned if the tube already exists
  • on_task_change - function name - a callback to be executed on every operation

The following options can be specified when putting a task in a fifottl queue:

  • pri - task priority (0 is the highest priority and is the default)
  • ttl - numeric - time to live for a task put into the queue, in seconds. if ttl is not specified, it is set to infinity (if a task exists in a queue for longer than ttl seconds, it is removed)
  • ttr - numeric - time allotted to the worker to work on a task, in seconds; if ttr is not specified, it is set to the same as ttl (if a task is being worked on for more than ttr seconds, its status is changed to 'ready' so another worker may take it)
  • delay - time to wait before starting to execute the task, in seconds

Example:

queue.create_tube('tube_name', 'fifottl', {temporary = true})
queue.tube.tube_name:put('my_task_data', { ttl = 60.1, delay = 80 })

In the example above, the task has 60.1 seconds to live, but the start of execution is delayed for 80 seconds. Thus the task actually will exist for up to (60.1 + 80) 140.1 seconds.

A smaller priority value indicates a higher priority, so a task with priority 1 will be executed after a task with priority 0, if all other options are equal.

limfifottl - a simple size-limited priority queue with support for task time to live

Works same as fifottl, but has limitied size and put operation timeout.

The following options can be specified when creating a fifottl queue:

  • temporary - boolean - if true, the contents of the queue do not persist on disk
  • if_not_exists - boolean - if true, no error will be returned if the tube already exists
  • on_task_change - function name - a callback to be executed on every operation
  • capacity - number - limit size of the queue

The following options can be specified when putting a task in a fifottl queue:

  • pri - task priority (0 is the highest priority and is the default)
  • ttl - numeric - time to live for a task put into the queue, in seconds. if ttl is not specified, it is set to infinity (if a task exists in a queue for longer than ttl seconds, it is removed)
  • ttr - numeric - time allotted to the worker to work on a task, in seconds; if ttr is not specified, it is set to the same as ttl (if a task is being worked on for more than ttr seconds, its status is changed to 'ready' so another worker may take it)
  • delay - time to wait before starting to execute the task, in seconds
  • timeout - numeric - seconds to wait until queue has free space; if timeout is not specified or time is up, and queue has no space, method return Nil

utube - a queue with sub-queues inside

The main idea of this queue backend is the same as in a fifo queue: the tasks are executed in FIFO order. However, tasks may be grouped into sub-queues.

It is advised not to use utube methods inside transactions with read-confirmed isolation level. It can lead to errors when trying to make parallel tube methods calls with mvcc enabled.

The following options can be specified when creating a utube queue:

  • temporary - boolean - if true, the contents of the queue do not persist on disk

  • if_not_exists - boolean - if true, no error will be returned if the tube already exists

  • on_task_change - function name - a callback to be executed on every operation

  • storage_mode - string - one of

    • queue.driver.utube.STORAGE_MODE_DEFAULT ("default") - default implementation of utube
    • queue.driver.utube.STORAGE_MODE_READY_BUFFER ("ready_buffer") - allows processing take requests faster, but by the cost of put operations speed. Right now this option is supported only for memtx engine. WARNING: this is an experimental storage mode.

    Here is a benchmark comparison of these two modes:

    • Benchmark for simple put and take methods. 30k utubes are created with a single task each. Task creation time is calculated. After that 30k consumers are calling take + ack, each in the separate fiber. Time to ack all tasks is calculated. The results are as follows:

      put (30k) take+ack
      default 180ms 1.6s
      ready 270ms 1.7s

    • Benchmark for the busy utubes. 10 tubes are created. Each contains 1000 tasks. After that, 10 consumers are created (each works on his tube only, one tube — one consumer). Each consumer will take, then yield and then ack every task from their utube (1000 tasks each). After that, we can also run this benchmark with 10k tasks on each utube, 100k tasks and 150k tasks. But all that with 10 utubes and 10 consumers. The results are as follows:

      1k 10k 50k 150k
      default 53s 1.5h 100h 1000h
      ready 450ms 4.7s 26s 72s

The following options can be specified when putting a task in a utube queue:

  • utube - the name of the sub-queue. Sub-queues split the task stream according to the sub-queue name: it is not possible to take two tasks out of a sub-queue concurrently, each sub-queue is executed in strict FIFO order, one task at a time.

utube queue does not support:

  • task priorities (pri)
  • task time to live (ttl)
  • task time to execute (ttr)
  • delayed execution (delay)

Example:

Imagine a web crawler, fetching pages from the Internet and finding URLs to fetch more pages. The web crawler is based on a queue, and each task in the queue refers to a URL which the web crawler must download and process. If the web crawler is split into many worker processes, then the same URL may show up in the queue many times, because a single URL may be referred to by many linking pages. And the worker processes, working in parallel, can cause a denial-of-service on the site of the URL. As a result, the web crawler can end up in the web server's user-agent ban list -- not a desirable outcome.

If the URL's domain name is used as a sub-queue name, this problem can be solved: all the URLs with the same domain name can be fetched and processed in strict FIFO order.

utubettl - extension of utube to support ttl

This queue type is effectively a combination of fifottl and utube.

It is advised not to use utubettl methods inside transactions with read-confirmed isolation level. It can lead to errors when trying to make parallel tube methods calls with mvcc enabled.

The following options can be specified when creating a utubettl queue:

  • temporary - boolean - if true, the contents of the queue do not persist on disk

  • if_not_exists - boolean - if true, no error will be returned if the tube already exists

  • on_task_change - function name - a callback to be executed on every operation

  • storage_mode - string - one of

    • queue.driver.utubettl.STORAGE_MODE_DEFAULT ("default") - default implementation of utubettl
    • queue.driver.utubettl.STORAGE_MODE_READY_BUFFER ("ready_buffer") - allows processing take requests faster, but by the cost of put operations speed. Right now this option is supported only for memtx engine. WARNING: this is an experimental storage mode.

    Here is a benchmark comparison of these two modes:

    • Benchmark for simple put and take methods. 30k utubes are created with a single task each. Task creation time is calculated. After that 30k consumers are calling take + ack, each in the separate fiber. Time to ack all tasks is calculated. The results are as follows:

      put (30k) take+ack
      default 200ms 1.7s
      ready 320ms 1.8s

    • Benchmark for the busy utubes. 10 tubes are created. Each contains 1000 tasks. After that, 10 consumers are created (each works on his tube only, one tube — one consumer). Each consumer will take, then yield and then ack every task from their utube (1000 tasks each). After that, we can also run this benchmark with 10k tasks on each utube, 100k tasks and 140k tasks. But all that with 10 utubes and 10 consumers. The results are as follows:

      1k 10k 50k 140k
      default 80s 1.6h 100h 1000h
      ready 520ms 5.4s 28s 83s

The following options can be specified when putting a task in a utubettl queue:

  • pri - task priority (0 is the highest priority and is the default)
  • utube - the name of the sub-queue
  • ttl - numeric - time to live for a task put into the queue, in seconds. if ttl is not specified, it is set to infinity (if a task exists in a queue for longer than ttl seconds, it is removed)
  • ttr - numeric - time allotted to the worker to work on a task, in seconds; if ttr is not specified, it is set to the same as ttl (if a task is being worked on for more than ttr seconds, its status is changed to 'ready' so another worker may take it)
  • delay - time to wait before starting to execute the task, in seconds

The underlying spaces

The queue system consists of fibers, IPC channels, functions, and spaces. Here is how queues map to spaces in a Tarantool database.

The _queue space contains tuples for each queue and its properties. This space is created automatically when the queue system is initialized for the first time (for example, by "require 'queue'"), and is re-used on later occasions.

Fields of the _queue space

  1. tube - the name of the queue
  2. tube_id - queue ID, numeric
  3. space - the name of a space associated with the queue, which contains one tuple for each queue task
  4. type - the queue type ('fifo', 'fifottl', 'utube', 'utubettl')
  5. opts - additional options supplied when creating the queue, for example 'ttl'

The _queue_consumers temporary space contains tuples for each job which is working on a queue. Consumers may be simply waiting for tasks to be put in the queues.

Fields of the _queue_consumers space

  1. connection_id - connection ID of the client
  2. fid - client fiber ID
  3. tube_id - queue ID, referring to the tube_id field in the _queue space; the client waits for tasks in this queue
  4. timeout - the client wait timeout
  5. time - the time when the client took a task

The _queue_taken_2 (_queue_taken is deprecated) space contains tuples for each job which is processing a task in the queue.

Fields of the _queue_taken_2 space

  1. tube_id - queue ID, to which the task belongs
  2. task_id - task ID (of the task being taken)
  3. connection_id - connection ID of the client, referring to the connection_id field of the _queue_consumers space
  4. session_uuid - session UUID (string)
  5. time - the time when the client began to execute the task

The _queue_session_ids space contains a map: connection id (box session id) to the session UUID. This space is temporary if in_replicaset is set to false.

Fields of the _queue_session_ids space

  1. connection_id - connection id (numeric)
  2. session_uuid - session UUID (string)

Fields of the _queue_shared_sessions space

  1. uuid - session UUID (string)
  2. exp_time - session expiration time (numeric)
  3. active - session state (boolean)

This space is temporary if in_replicaset is set to false.

Also, there is a space which is associated with each queue, which is named in the space field of the _queue space. The associated space contains one tuple for each task.

Fields of the space associated with each queue

  1. task_id - numeric - see below
  2. task_state - 'r' for ready, 't' for taken, etc. - see below
  3. task_data - the contents of the task, usually a long string x. (additional fields if the queue type has options for ttl, priority, or delay)

The task_id value is assigned to a task when it's inserted into a queue. Currently, task_id values are simple integers for fifo and fifottl queues.

The task_state field takes one of the following values (different queue types support different sets of task_state values, so this is a superset):

  • 'r' - the task is ready for execution (the first consumer executing a take request will get it)
  • 't' - the task has been taken by a consumer
  • '-' - the task has been executed (done) (a task is removed from the queue after it has been executed, so this value will rarely be seen)
  • '!' - the task is buried (disabled temporarily until further changes)
  • '~' - the task is delayed for some time.

For details on the state transitions, refer to Task state diagram.

Task state diagram

The following diagram shows possible transitions between the task states. For information on the transition triggers, refer to:

flowchart LR
      INIT((" "))-->  |"put()"| READY
      INIT((" "))--> |"put('my_task_data', {delay = delay})"| DELAYED
      READY--> |"take()"| TAKEN
      READY--> |"delete() / ttl timeout"| DONE
      READY--> |"bury()"| BURIED
      TAKEN--> |"release() / ttr timeout"| READY
      TAKEN--> |"release\n(id, {delay = delay})"| DELAYED
      TAKEN--> |"ack() / delete()"| DONE
      TAKEN--> |"bury()"| BURIED
      BURIED--> |"delete() /\nttl timeout"| DONE
      BURIED--> |"kick()"| READY
      DELAYED--> |"timeout"| READY
      DELAYED--> |"delete()"| DONE
Loading

Queue state diagram

Queue can be used in a master-replica scheme:

There are five states for queue:

  • INIT
  • STARTUP
  • RUNNING
  • ENDING
  • WAITING

When the tarantool is launched for the first time, the state of the queue is always INIT until box.info.ro is false.

States switching scheme:

flowchart LR
      I(("init"))-->S[startup]
      S[startup]-->R[running]
      W[waiting]--> |"(ro ->rw)"| S[startup]
      R[running]--> |"(rw ->ro)"| E[ending]
      E[ending]-->W[waiting]
Loading

Current queue state can be shown by using queue.state() method.

In the STARTUP state, the queue is waiting for possible data synchronization with other cluster members by the time of the largest upstream lag multiplied by two. After that, all taken tasks are released, except for tasks with session uuid matching shared sessions uuids. This makes possible to take a task, switch roles on the cluster, and release the task within the timeout specified by the queue.cfg({ttr = N}) parameter. And the last step in the STARTUP state is starting tube driver using new method called start().

In the RUNNING state, the queue is working as usually. The ENDING state calls stop() method. in the WAITING state, the queue listens for a change in the read_only flag.

All states except INIT is controlled by new fiber called queue_state_fiber.

Installing

There are three alternative ways of installation.

  • Get the tarantool_queue package from a repository. For example, on Ubuntu, say: sudo apt-get install tarantool-queue
  • Take the Lua rock from rocks.tarantool.org.
  • Take the source files from https://github.com/tarantool/queue, then build and install.

Using the queue module

Initialization

queue = require 'queue'

The request "require 'queue'" causes automatic creation of the _queue space, unless it already exists. The same request also sets the necessary space triggers and other objects associated with queues.
If the instance hasn't been configured yet (box.cfg() hasn't been called), the initialization of the queue module will be deferred until the instance will be configured ("lazy start"). For a good work of the queue, it's necessary to run the instance in rw mode. If the instance run in ro mode, the initialization of the queue will be deferred until the instance will be configured in rw mode. After the instance has been started in rw mode and the queue has been initialized, it's a bad idea to switch it to ro mode. In the case, an attempt to do something with a persistent ("temporary" option set to false) queue will fail (a temporary queue will work fine). In addition, in the case of mode has been switched, triggers may fail (_on_consumer_disconnect for example), which may cause an inconsistent state of the queue. As for the core drivers that use background fibers (fifottl, limfifottl, utubettl) - they check the instance mode on each iteration and will wait until the instance will be switched to rw mode.

Get the module version

queue._VERSION

Returns the current version of the module.

Creating a new queue

queue.create_tube(queue name, queue type [, {options} ])

Creates a queue.

The queue name must be alphanumeric and be up to 32 characters long.

The queue type must be 'fifo', 'fifottl', 'utube', or 'utubettl'.

The options, if specified, must be one or more of the options described above (temporary and/or ttl and/or ttr and/or pri, depending on the queue type). The ttr and ttl options can be regarded as defaults, which may be overridden when a task is put in a queue.

Effect: a tuple is added in the _queue space, and a new associated space is created.

Example: queue.create_tube('list_of_sites', 'fifo', {temporary = true})

Set queue settings

queue.cfg({options})

Set queue settings.
If an invalid value or an unknown option is used, an error will be thrown.
Available options:

  • ttr - time to release in seconds. The time after which, if there is no active connection in the session, it will be released with all its tasks.
  • in_replicaset - enable replication mode. Must be true if the queue is used in master and replica mode. With replication mode enabled, the potential loss of performance can be ~20% compared to single mode. Default value is false.

Session identify

queue.identify(session_uuid)

In the queue the session has a unique UUID and many connections may share one logical session. Also, the consumer can reconnect to the existing session during thettr time.
To get the UUID of the current session, call the queue.identify() without parameters.
To connect to the existing session, call the queue.identify(session_uuid) with the UUID of the session.
In case of attempt to use an invalid format UUID or expired UUID, an error will be thrown.

Be careful, UUID here is a 16-bit string generated by uuid.bin(), not an object of type UUID.

Usage example:
Sometimes we need an ability to acknowledge a task after reconnect (because retrying it is undesirable) or even acknowlegde using another connection.

Example of code for connecting to the old session in case of reconnection:

local netbox = require('net.box')

local conn = netbox.connect('localhost:1918', { reconnect_after = 5 })
local session_uuid = conn:call('queue.identify')
conn:on_connect(function()
    conn:call('queue.identify', {session_uuid})
end)

Putting a task in a queue

To insert a new task into a queue, use:

queue.tube.tube_name:put(task_data [, {options} ])

The tube_name must be the name which was specified by queue.create_tube.

The task_data contents are the user-defined description of the task, usually a long string.

The options, if specified, must be one or more of the options described above (ttl and/or ttr and/or pri and/or delay and/or utube, depending on the queue type). If an option is not specified, the default is what was specified during queue.create_tube, and if that was not specified, then the default is what was described above for the queue type. Note: if the delay option is specified, the delay time is added to the ttl time.

Effect: a new tuple is created in the queue's associated space, with task_id = a number which is equal to the largest task_id so far, plus 1 task_state = 'r' (ready) task_data = whatever the user put in the task_data parameter

Returns: the value of the new tuple in the queue's associated space, also called the "created task".

Example: queue.tube.list_of_sites:put('Your task is to do something', {pri=2})

After a task has been put in a queue, one of these things may happen: it may be removed from the queue because its ttl (time to live) expires, or it may be acted on by a worker (usually with a take request).

Taking a task from the queue ("consuming")

queue.tube.tube_name:take([timeout])

Take a queue task.

The take request searches for a task in the queue or sub-queue (that is, a tuple in the queue's associated space) which has task_state = 'r' (ready), and task_id = a value lower than any other tuple which also has task_state = 'r'.

If there is no such task, and timeout was specified, then the job waits until a task becomes ready or the timeout expires.

Effect: the value of task_state changes to 't' (taken). The take request tells the system that the task is being worked on. It should be followed by an ack request when the work is finished. Additional effect: a tuple is added to the _queue_taken_2 space.

Returns: the value of the taken tuple, or nil if none was found. The value of the first field in the tuple (task_id) is important for further requests. The value of the second field in the tuple (task_data) is important as it presumably contains user-defined instructions for what to do with the task.

Example: t_value = queue.tube.list_of_sites:take(15)

Increasing TTR and/or TTL for tasks

queue.tube.tube_name:touch(task_id, increment)

Increase ttr of running task. Useful if you can't predict in advance time needed to work on task.

Effect: the value of ttr and ttl increased by increment seconds. If queue does not support ttr, error will be thrown. If increment is lower than zero, error will be thrown. If increment is zero or nil effect is noop. If current ttr of task is 500 years or greater then operation is noop.

Example: t_value = queue.tube.list_of_sites:touch(15, 60)

Acknowledging the completion of a task

queue.tube.tube_name:ack(task_id)

The worker which has used 'take' to take the task should use 'ack' to signal that the task has been completed. The current task_state of the tuple should be 't' (taken), and the worker issuing the ack request must have the same ID as the worker which issued the take request.

Effect: the value of task_state changes to '-' (acknowledged). Shortly after this, it may be removed from the queue automatically.

If 'take' occurs but is not soon followed by 'ack' -- that is, if ttr (time to run) expires, or if the worker disconnects -- the effect is: task_state is changed from 't' (taken) back to 'r' (ready). This effect is the same as what would happen with a release request.

Example: queue.tube.list_of_sites:ack(15)

Releasing a task

queue.tube.tube_name:release(task_id, opts)

Put the task back in the queue. A worker which has used 'take' to take a task, but cannot complete it, may make a release request instead of an ack request. Effectively, 'ack' implies successful completion of a taken task, and 'release' implies unsuccessful completion of a taken task.

Effect: the value of task_state changes to 'r' (ready). After this, another worker may take it. This is an example of a situation where, due to user intervention, a task may not be successfully completed in strict FIFO order.

Example: queue.tube.list_of_sites:release(15, {delay=10})

Note: in the above example, the delay option means "the task cannot be executed again for 10 seconds".

Peeking at a task

queue.tube.tube_name:peek(task_id)

Look at a task without changing its state.

Effect: this is the same as getting a tuple from the space associated with the queue: box.space.tube_name:select(task_id).

Returns: the tuple of the task.

Example: queue.tube.list_of_sites:peek(15)

Burying a task

queue.tube.tube_name:bury(task_id)

If it becomes clear that a task cannot be executed in the current circumstances, you can "bury" the task -- that is, disable it until the circumstances change.

Effect: the value of task_state changes to '!' (buried). Since '!' is not equal to 'r' (ready), the task can no longer be taken. Since '!' is not equal to '-' (complete), the task will not be deleted. The only thing that can affect a buried task is a kick request.

Returns: the tuple value.

Example: queue.tube.list_of_sites:bury(15)

Kicking a number of tasks

queue.tube.tube_name:kick(count)

Reverse the effect of a bury request on one or more tasks.

Effect: the value of task_state changes from '!' (buried) to 'r' (ready), for one or more tasks.

Returns: number of tasks actually kicked.

Example: queue.tube.list_of_sites:kick(99) (this will change up to 99 buried tasks)

Deleting a task

queue.tube.tube_name:delete(task_id)

Delete the task identified by task_id.

Effect: the current state of task_state is not checked. The task is removed from the queue.

Example: queue.tube.list_of_sites:delete(15)

Dropping a queue

queue.tube.tube_name:drop()

Reverse the effect of a create request.

Effect: remove the tuple from the _queue space, and drop the space associated with the queue.

Releasing all taken tasks

queue.tube.tube_name:release_all()

Forcibly returns all taken tasks to a ready state.

Getting statistics

queue.statistics( [queue name] )

Show the number of tasks in a queue broken down by task_state, and the number of requests broken down by the type of request. If the queue name is not specified, show these numbers for all queues. Statistics are temporary, they are reset whenever the Tarantool server restarts.

Example:

queue.tube.tube_name:on_task_change(callback)

Replace old on_task_change callback or set the new one. Previously set callback is returned.

Get statistics for given tube:

queue.statistics('list_of_sites')
---
- tasks:
     taken: 0
     buried: 0
     ready: 0
     done: 2
     delayed: 0
     total: 0
   calls:
     ack: 1
     take: 1
     kick: 1
     bury: 1
     put: 2
     delete: 1
...

Queue and replication

Usage example:

-- Instance file for the master.
queue = require("queue")
-- Queue is in replicaset.
-- Clean up session after 5 minutes after disconnect.
queue.cfg({ttr = 300, in_replicaset = true})

box.cfg{
  listen = 3301,
  replication = {'replicator:[email protected]:3301',  -- Master URI.
                 'replicator:[email protected]:3302'}, -- Replica URI.
  read_only = false,
}

box.once("schema", function()
   box.schema.user.create('replicator', {password = 'password'})
   box.schema.user.grant('replicator', 'replication') -- grant replication role
end)

require('console').start()
os.exit()
-- Instance file for the replica.
queue = require("queue")
-- Queue is in replicaset.
-- Clean up session after 5 minutes after disconnect.
queue.cfg({ttr = 300, in_replicaset = true})
box.cfg{
  listen = 3302,
  replication = {'replicator:[email protected]:3301',  -- Master URI.
                 'replicator:[email protected]:3302'}, -- Replica URI.
  read_only = true
}

require('console').start()
os.exit()

Start master and replica instances and check queue state:

Master:

tarantool> queue.state()
---
- RUNNING
...

Replica:

tarantool> queue.state()
---
- INIT
...

Now reverse the read_only setting of the master and replica and check the status of the queue again.

Master:

tarantool> box.cfg({read_only = true})
tarantool> queue.state()
---
- WAITING
...

Replica:

tarantool> box.cfg({read_only = false})
tarantool> queue.state()
---
- RUNNING
...

Implementation details

The implementation is based on the common functions for all queues:

  1. controlling the consumers (watching connection state/wakeup)
  2. similarities of the API
  3. spaces to support each tube
  4. etc

Each new queue has a "driver" to support it.

Queue drivers

Mandatory requirements

  1. The driver works with tuples. The only thing the driver needs to know about the tuples is their first two fields: id and state.
  2. Whenever the driver notices that a task state has changed, it must notify the framework about the change.
  3. The driver must not throw exceptions, unless the driver API is misused. I.e. for normal operation, even errors during normal operation, there should be no exceptions.

Registering a custom driver

register_driver(driver_name, tube_ctr) - queue method is used to register a custom driver. The arguments are:

  • driver_name: unique driver name. Must be different from the core drivers names.
  • tube_ctr: implementation of tube control methods("create_space" and "new").

Driver API

Driver class must implement the following API:

  1. new (constructs an instance of a driver), takes:
    • the space object, in which the driver must store its tasks
    • a callback to notify the main queue framework on a task state change (on_task_change)
    • options of the queue (a Lua table)
  2. create_space - creates the supporting space. The arguments are:
    • space name
    • space options
  3. start - initialize internal resources if any, e.g. start fibers.
  4. stop - clean up internal resources if any, e.g. stop fibers.

To sum up, when the user creates a new queue, the queue framework passes the request to the driver, asking it to create a space to support this queue, and then creates a driver instance, passing to it the created space object.

The same call sequence is used when the queue is "restarted" after Tarantool server restart.

The driver instance returned by the new method must provide the following API:

  • tube:normalize_task(task) - converts the task tuple to the object which is passed on to the user (removes the administrative fields)
  • tube:put(data[, opts]) - puts a task into the queue. Returns a normalized task which represents a tuple in the space
  • tube:take() - sets the task state to 'in progress' and returns the task. If there are no 'ready' tasks in the queue, returns nil.
  • tube:delete(task_id) - deletes a task from the queue. Returns the original task with a state changed to 'done'
  • tube:release(task_id, opts) - puts a task back to the queue (in the 'ready' state)
  • tube:bury(task_id) - buries a task
  • tube:kick(count) - digs out count tasks
  • tube:peek(task_id) - return the task state by ID
  • tube:touch(task_id, delta) - increases ttr and ttl of the task by delta seconds. If queue does not support ttr, error will be thrown. Returns the task
  • tube:tasks_by_state(task_state) - return the iterator to tasks in a certain state
  • tube:truncate() - delete all tasks from the tube. Note that tube:truncate must be called only by the user who created this tube (has space ownership) OR under a setuid function. Read more about setuid functions here.