Running Telly: Config File
Here's an example configuration file. You will need to create this file. It should be placed in /etc/telly/telly.config.toml or $HOME/.telly/telly.config.toml or telly.config.toml in the directory that telly is running from.
NOTE "the directory telly is running from" is your CURRENT WORKING DIRECTORY. For example, if telly and its config file file are in
/opt/telly/and you run telly from your home directory, telly will not find its config file because it will be looking for it in your home directory. If this makes little sense to you, use one of the other two locations OR cd into the directory where telly is located before running it from the command line.
ATTENTION Windows users: be sure that there isn’t a hidden extension on the file. Telly can't read its config file if it's named something like
telly.config.toml.txt.
# THIS SECTION IS REQUIRED ########################################################################
[Discovery] # most likely you won't need to change anything here
Device-Auth = "telly123" # These settings are all related to how telly identifies
Device-ID = 12345678 # itself to Plex.
Device-UUID = ""
Device-Firmware-Name = "hdhomeruntc_atsc"
Device-Firmware-Version = "20150826"
Device-Friendly-Name = "telly"
Device-Manufacturer = "Silicondust"
Device-Model-Number = "HDTC-2US"
SSDP = true
# Note on running multiple instances of telly
# There are three things that make up a "key" for a given Telly Virtual Tuner:
# Device-ID [required], Device-UUID [optional], and port [required]
# When you configure your additional telly instances, change:
# the Device-ID [above] AND
# the Device-UUID [above, if you're entering one] AND
# the port [below in the "Web" section]
# THIS SECTION IS REQUIRED ########################################################################
[IPTV]
Streams = 1 # number of simultaneous streams that telly virtual tuner will provide
# This is often 1, but is set by your iptv provider; for example,
# Vaders provides 5
Starting-Channel = 10000 # When telly assigns channel numbers it will start here
XMLTV-Channels = true # if true, any channel numbers specified in your M3U file will be used.
# FFMpeg = true # if this is uncommented, streams are buffered through ffmpeg;
# ffmpeg must be installed and on your $PATH
# if you want to use this with Docker, be sure you use the correct docker image
# if you DO NOT WANT TO USE FFMPEG leave this commented; DO NOT SET IT TO FALSE
# THIS SECTION IS REQUIRED ########################################################################
[Log]
Level = "info" # Only log messages at or above the given level. [debug, info, warn, error, fatal]
Requests = true # Log HTTP requests made to telly
# THIS SECTION IS REQUIRED ########################################################################
[Web]
Base-Address = "0.0.0.0:6077" # Set this to the IP address of the machine telly runs on
Listen-Address = "0.0.0.0:6077" # this can stay as-is
# THIS SECTION IS OPTIONAL ========================================================================
#[SchedulesDirect] # If you have a Schedules Direct account, fill in details and then
# UNCOMMENT THIS SECTION
# Username = "" # This is under construction; Vader is the only provider
# Password = "" # that works with it fully at this time
# AT LEAST ONE SOURCE IS REQUIRED #################################################################
# DELETE OR COMMENT OUT SOURCES THAT YOU ARE NOT USING ############################################
# NONE OF THESE EXAMPLES WORK AS-IS; IF YOU DON'T CHANGE IT, DELETE IT ############################
[[Source]]
Name = "" # Name is optional and is used mostly for logging purposes
Provider = "Vaders" # named providers currently supported are "Vaders", "area51", "Iris"
# IF YOUR PROVIDER IS NOT ONE OF THE ABOVE, CONFIGURE IT AS A "Custom" PROVIDER; SEE BELOW
Username = "YOUR_IPTV_USERNAME"
Password = "YOUR_IPTV_PASSWORD"
# THE FOLLOWING KEYS ARE OPTIONAL IN THEORY, REQUIRED IN PRACTICE
Filter = "Sports|Premium Movies|United States.*|USA"
FilterKey = "group-title" # FilterKey normally defaults to whatever the provider file says is best,
# otherwise you must set this.
FilterRaw = false # FilterRaw will run your regex on the entire line instead of just specific keys.
Sort = "group-title" # Sort will alphabetically sort your channels by the M3U key provided
[[Source]]
Name = "" # Name is optional and is used mostly for logging purposes
Provider = "IPTV-EPG" # DO NOT CHANGE THIS IF YOU ARE USING THIS PROVIDER
Username = "M3U-Identifier" # From http://iptv-epg.com/[M3U-Identifier].m3u
Password = "XML-Identifier" # From http://iptv-epg.com/[XML-Identifier].xml
# NOTE: THOSE KEY NAMES DO NOT MAKE SENSE FOR THIS PROVIDER ################
# THIS IS JUST AN IMPLEMENTATION DETAIL. JUST GO WITH IT.
# For this purpose, IPTV-EPG does not have a "username" and "password", HOWEVER,
# telly's scaffolding for a "Named provider" does. Rather than special-casing this provider,
# the username and password are used to hold the two required bits of information.
# THIS IS JUST AN IMPLEMENTATION DETAIL. JUST GO WITH IT.
# NOTE: THOSE KEY NAMES DO NOT MAKE SENSE FOR THIS PROVIDER ################
# THE FOLLOWING KEYS ARE OPTIONAL HERE; IF YOU"RE USING IPTV-EPG YOU'VE PROBABLY DONE YOUR
# FILTERING THERE ALREADY
# Filter = ""
# FilterKey = ""
# FilterRaw = false
# Sort = ""
[[Source]]
Name = "" # Name is optional and is used mostly for logging purposes
Provider = "Custom" # DO NOT CHANGE THIS IF YOU ARE ENTERING URLS OR FILE PATHS
# "Custom" is telly's internal identifier for this 'Provider'
# If you change it to "NAMEOFPROVIDER" telly's reaction will be
# "I don't recognize a provider called 'NAMEOFPROVIDER'."
M3U = "http://myprovider.com/playlist.m3u" # These can be either URLs or fully-qualified paths.
EPG = "http://myprovider.com/epg.xml"
# THE FOLLOWING KEYS ARE OPTIONAL IN THEORY, REQUIRED IN PRACTICE
Filter = "Sports|Premium Movies|United States.*|USA"
FilterKey = "group-title" # FilterKey normally defaults to whatever the provider file says is best,
# otherwise you must set this.
FilterRaw = false # FilterRaw will run your regex on the entire line instead of just specific keys.
Sort = "group-title" # Sort will alphabetically sort your channels by the M3U key provided
# END TELLY CONFIG ############################################################################### You only need one source; the ones you are not using should be commented out or deleted.
The name and filter-related keys can be used with any of the sources.