Running Telly: Config File

Configuration

Here's an example configuration file. You will need to create this file. It should be placed in /etc/telly/telly.config.toml or $HOME/.telly/telly.config.toml or telly.config.toml in the directory that telly is running from.

ATTENTION Windows users: be sure that there isn’t a hidden extension on the file. Telly can't read its config file if it's named something like telly.config.toml.txt.

# THIS SECTION IS REQUIRED ########################################################################
[Discovery]                                    # most likely you won't need to change anything here
  Device-Auth = "telly123"                     # These settings are all related to how telly identifies
  Device-ID = 12345678                         # itself to Plex.
  Device-UUID = ""
  Device-Firmware-Name = "hdhomeruntc_atsc"
  Device-Firmware-Version = "20150826"
  Device-Friendly-Name = "telly"
  Device-Manufacturer = "Silicondust"
  Device-Model-Number = "HDTC-2US"
  SSDP = true

# THIS SECTION IS REQUIRED ########################################################################
[IPTV]
  Streams = 1               # number of simultaneous streams that the telly virtual DVR will provide
                            # This is often 1, but is set by your iptv provider; for example, 
                            # Vaders provides 5
  Starting-Channel = 10000  # When telly assigns channel numbers it will start here
  XMLTV-Channels = true     # if true, any channel numbers specified in your M3U file will be used.
# FFMpeg = true             # if this is uncommented, streams are buffered through ffmpeg; 
                            # ffmpeg must be installed and on your $PATH
                            # if you want to use this with Docker, be sure you use the correct docker image
# if you DO NOT WANT TO USE FFMPEG leave this commented; DO NOT SET IT TO FALSE
  
# THIS SECTION IS REQUIRED ########################################################################
[Log]
  Level = "info"            # Only log messages at or above the given level. [debug, info, warn, error, fatal]
  Requests = true           # Log HTTP requests made to telly

# THIS SECTION IS REQUIRED ########################################################################
[Web]
  Base-Address = "0.0.0.0:6077"   # Set this to the IP address of the machine telly runs on
  Listen-Address = "0.0.0.0:6077" # this can stay as-is

# THIS SECTION IS OPTIONAL ========================================================================
#[SchedulesDirect]           # If you have a Schedules Direct account, fill in details and then
                             # UNCOMMENT THIS SECTION
#  Username = ""             # This is under construction; Vader is the only provider
#  Password = ""             # that works with it fully at this time

# AT LEAST ONE SOURCE IS REQUIRED #################################################################
# DELETE OR COMMENT OUT SOURCES THAT YOU ARE NOT USING ############################################
# NONE OF THESE EXAMPLES WORK AS-IS; IF YOU DON'T CHANGE IT, DELETE IT ############################
[[Source]]
  Name = ""                 # Name is optional and is used mostly for logging purposes
  Provider = "Vaders"       # named providers currently supported are "Vaders", "area51", "Iris"
# IF YOUR PROVIDER IS NOT ONE OF THE ABOVE, CONFIGURE IT AS A "Custom" PROVIDER; SEE BELOW
  Username = "YOUR_IPTV_USERNAME"
  Password = "YOUR_IPTV_PASSWORD"
  # THE FOLLOWING KEYS ARE OPTIONAL IN THEORY, REQUIRED IN PRACTICE
  Filter = "Sports|Premium Movies|United States.*|USA"
  FilterKey = "group-title" # FilterKey normally defaults to whatever the provider file says is best, 
                            # otherwise you must set this.
  FilterRaw = false         # FilterRaw will run your regex on the entire line instead of just specific keys.
  Sort = "group-title"      # Sort will alphabetically sort your channels by the M3U key provided

[[Source]]
  Name = ""
  Provider = "IPTV-EPG"
  Username = "M3U-Identifier"  # From http://iptv-epg.com/[M3U-Identifier].m3u
  Password = "XML-Identifier"  # From http://iptv-epg.com/[XML-Identifier].xml
  # THE FOLLOWING KEYS ARE OPTIONAL HERE; IF YOU"RE USING IPTV-EPG YOU'FE PROBABLY DONE YOUR
  # FILTERING THERE ALREADY
  # Filter = ""
  # FilterKey = ""
  # FilterRaw = false
  # Sort = ""

[[Source]]
  Provider = "Custom"
  M3U = "http://myprovider.com/playlist.m3u"  # These can be either URLs or fully-qualified paths.
  EPG = "http://myprovider.com/epg.xml"
  # THE FOLLOWING KEYS ARE OPTIONAL IN THEORY, REQUIRED IN PRACTICE
  Filter = "Sports|Premium Movies|United States.*|USA"
  FilterKey = "group-title" # FilterKey normally defaults to whatever the provider file says is best, 
                            # otherwise you must set this.
  FilterRaw = false         # FilterRaw will run your regex on the entire line instead of just specific keys.
  Sort = "group-title"      # Sort will alphabetically sort your channels by the M3U key provided
# END TELLY CONFIG  ###############################################################################