esp.yaml

sensor:
  - platform: wifi_signal
    name: "Attached Garage Sensor WiFi Signal"
    update_interval: 60s
  - platform: dht
    pin: D7
    temperature:
      name: "Attached Garage Sensor Temperature"
    humidity:
      name: "Attached Garage Sensor Humidity"
    update_interval: 60s
    model: DHT22
  - platform: ultrasonic
    trigger_pin: D1
    echo_pin: D2
    update_interval: 1s
    name: "Attached Garage Ultrasonic"
    id: ultrasonic_id
    filters:
      filter_out: nan
    timeout: 4m
    on_value_range:
      - below: 0.2
        then:
          - light.turn_on:
              id: parkingled
              brightness: 100%
              red: 100%
              green: 0%
              blue: 0%
      - above: 0.2
        below: 0.3
        then:
          - light.turn_on: 
              id: parkingled
              brightness: 100%
              red: 100%
              green: 100%
              blue: 0%
      - above: 0.3
        below: 0.4
        then:
          - light.turn_on:
              id: parkingled
              brightness: 100%
              red: 0%
              green: 100%
              blue: 0%
      - above: 0.5
        then:
          - light.turn_off:
              id: parkingled
      - below: 0.1
        then:
          - light.turn_on:
              id: parkingled
              effect: "Red Strobe"

light:
  - platform: fastled_clockless
    chipset: WS2812B
    pin: GPIO12
    num_leds: 21
    rgb_order: GRB
    name: "Attached Garage Parking LED"
    restore_mode: ALWAYS_OFF
    default_transition_length: 0s
    id: parkingled
    effects:
      - strobe:
      - strobe:
          name: Red Strobe
          colors:
            - state: True
              brightness: 100%
              red: 100%
              green: 0%
              blue: 0%
              duration: 100ms
            - state: False
              duration: 100ms