Skip to content

Latest commit

 

History

History
36 lines (30 loc) · 1.75 KB

SetupShare.md

File metadata and controls

36 lines (30 loc) · 1.75 KB
Raw

Hosting the archive on Windows File Shares, MacOS Sharing, or Samba on Linux

Set up a share to host the archive on a computer on your home network. These instructions assume that you created a share named "SailfishCam" on the server "Nautilus".

It is recommended that you create a new user. Grant the user you'll be using read/write access to the share. These instructions will assume that the user you've created is named "sailfish" and that the password for this user is "pa$$w0rd".

Now, on the Pi:

  1. Enter the root session (if you haven't already):

    sudo -i

  2. Try to ping your archive server from the Pi. In this example the server is named nautilus.

    ping -c 3 nautilus

  3. If the server can't be reached, ping its IP address (These instructions will assume that the IP address of the archive server is 192.168.0.41.):

    ping 192.168.0.41

    To get the IP address of the archive machine:

    • On Windows: Open a PowerShell session and type ipconfig. Get the IP address from the line labeled "IPv4 Address".
    • On MacOS or Linux open a terminal and type ifconfig.

    If you can't ping the archive server by IP address from the Pi, go do whatever you need to on your network to fix that.

    If you can't reach the archive server by name but you can by IP address then use its IP address, below, for the archiveserver variable.

  4. Run these commands, subsituting your values:

    export ARCHIVE_SYSTEM="cifs"
export archiveserver="Nautilus"
export sharename="SailfishCam"
export shareuser="sailfish"
export sharepassword="pa$$w0rd"

Now stay in your sudo -i session and return to the section "Set up the USB storage functionality" in the main instructions.