diff --git a/.github/workflows/test-rook-build.yml b/.github/workflows/test-rook-build.yml new file mode 100644 index 0000000000000..b4411f01d92a8 --- /dev/null +++ b/.github/workflows/test-rook-build.yml @@ -0,0 +1,46 @@ +# +# test-rook-build.yml +# Do test build to catch compile errors +# + +name: Rook CI + +on: + pull_request: + paths-ignore: + - config/** + - data/** + - docs/** + - '**/*.md' + push: + paths-ignore: + - config/** + - data/** + - docs/** + - '**/*.md' + +jobs: + test_builds: + name: Test Build + if: github.repository == 'thisiskeithb/Marlin' + + runs-on: ubuntu-latest + + steps: + - name: Check Out Commit + uses: actions/checkout@v3 + + - name: Select Python 3.7 + uses: actions/setup-python@v3 + with: + python-version: '3.7' # Version range or exact version of a Python version to use, using semvers version range syntax. + architecture: 'x64' # optional x64 or x86. Defaults to x64 if not specified + + - name: Install PlatformIO + run: | + pip install -U platformio + pio upgrade --dev + pio pkg update --global + + - name: Build Marlin + run: pio run diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index ad659f70e256a..4552bfb900171 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -61,14 +61,14 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Rolohaun Rook MK1.1)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) // @section machine // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V3_0 #endif /** @@ -79,7 +79,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 2 // TFT /** * Serial Port Baud Rate @@ -92,7 +92,7 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 //#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate @@ -101,7 +101,7 @@ * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 // USB //#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE /** @@ -116,7 +116,7 @@ //#define BLUETOOTH // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Rook MK1.1" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -139,9 +139,9 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 @@ -153,7 +153,7 @@ //#define U_DRIVER_TYPE A4988 //#define V_DRIVER_TYPE A4988 //#define W_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -393,7 +393,7 @@ * Specify whether the power supply is active HIGH or active LOW. */ //#define PSU_CONTROL -//#define PSU_NAME "Power Supply" +#define PSU_NAME "24V 200W" #if ENABLED(PSU_CONTROL) //#define MKS_PWC // Using the MKS PWC add-on @@ -552,7 +552,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -579,8 +579,8 @@ #endif #if HAS_E_TEMP_SENSOR - #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 - #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer + #define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 + #define TEMP_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #endif @@ -628,7 +628,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 265 // 250 + 15 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -636,7 +636,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 60 // 50 + 10 #define CHAMBER_MAXTEMP 60 /** @@ -662,8 +662,8 @@ * PIDTEMP : PID temperature control (~4.1K) * MPCTEMP : Predictive Model temperature control. (~1.8K without auto-tune) */ -#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning -//#define MPCTEMP // ** EXPERIMENTAL ** See https://marlinfw.org/docs/features/model_predictive_control.html +//#define PIDTEMP // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning +#define MPCTEMP // ** EXPERIMENTAL ** See https://marlinfw.org/docs/features/model_predictive_control.html #define PID_MAX 255 // Limit hotend current while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current #define PID_K1 0.95 // Smoothing factor within any PID loop @@ -676,13 +676,14 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify up to one value per hotend here, according to your setup. // If there are fewer values, the last one applies to the remaining hotends. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 13.49, 13.49 } + #define DEFAULT_Ki_LIST { 1.87, 1.08 } + #define DEFAULT_Kd_LIST { 24.27, 24.27 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // Rook MK1.1 + #define DEFAULT_Kp 13.49 + #define DEFAULT_Ki 1.87 + #define DEFAULT_Kd 24.27 #endif #else #define BANG_MAX 255 // Limit hotend current while in bang-bang mode; 255=full current @@ -698,20 +699,20 @@ */ #if ENABLED(MPCTEMP) #define MPC_AUTOTUNE // Include a method to do MPC auto-tuning (~6.3K bytes of flash) - //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1.3K bytes of flash) - //#define MPC_AUTOTUNE_MENU // Add MPC auto-tuning to the "Advanced Settings" menu. (~350 bytes of flash) + #define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1.3K bytes of flash) + #define MPC_AUTOTUNE_MENU // Add MPC auto-tuning to the "Advanced Settings" menu. (~350 bytes of flash) #define MPC_MAX 255 // (0..255) Current to nozzle while MPC is active. - #define MPC_HEATER_POWER { 40.0f } // (W) Heat cartridge powers. + #define MPC_HEATER_POWER { 50.0f } // (W) Heat cartridge powers. #define MPC_INCLUDE_FAN // Model the fan speed? // Measured physical constants from M306 - #define MPC_BLOCK_HEAT_CAPACITY { 16.7f } // (J/K) Heat block heat capacities. - #define MPC_SENSOR_RESPONSIVENESS { 0.22f } // (K/s per ∆K) Rate of change of sensor temperature from heat block. - #define MPC_AMBIENT_XFER_COEFF { 0.068f } // (W/K) Heat transfer coefficients from heat block to room air with fan off. + #define MPC_BLOCK_HEAT_CAPACITY { 6.52f } // (J/K) Heat block heat capacities. + #define MPC_SENSOR_RESPONSIVENESS { 0.3518f } // (K/s per ∆K) Rate of change of sensor temperature from heat block. + #define MPC_AMBIENT_XFER_COEFF { 0.0664f } // (W/K) Heat transfer coefficients from heat block to room air with fan off. #if ENABLED(MPC_INCLUDE_FAN) - #define MPC_AMBIENT_XFER_COEFF_FAN255 { 0.097f } // (W/K) Heat transfer coefficients from heat block to room air with fan on full. + #define MPC_AMBIENT_XFER_COEFF_FAN255 { 0.0774f } // (W/K) Heat transfer coefficients from heat block to room air with fan on full. #endif // For one fan and multiple hotends MPC needs to know how to apply the fan cooling effect. @@ -762,17 +763,16 @@ * * With this option disabled, bang-bang will be used. BED_LIMIT_SWITCHING enables hysteresis. */ -//#define PIDTEMPBED +#define PIDTEMPBED #if ENABLED(PIDTEMPBED) //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Print Bed PID debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Rook MK1.1 + #define DEFAULT_bedKp 45.47 + #define DEFAULT_bedKi 8.48 + #define DEFAULT_bedKd 162.49 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #else @@ -833,8 +833,8 @@ #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash) #endif // @section safety @@ -854,7 +854,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 650 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -886,7 +886,7 @@ // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics, // either in the usual order or reversed -//#define COREXY +#define COREXY //#define COREXZ //#define COREYZ //#define COREYX @@ -1190,7 +1190,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -1207,7 +1207,7 @@ //#define ENDSTOP_NOISE_THRESHOLD 2 // Check for stuck or disconnected endstops during homing moves. -//#define DETECT_BROKEN_ENDSTOP +#define DETECT_BROKEN_ENDSTOP //============================================================================= //============================== Movement Settings ============================ @@ -1234,14 +1234,14 @@ * Override with M92 * X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 80, 415 } /** * Default Max Feed Rate (linear=mm/s, rotational=°/s) * Override with M203 * X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 10, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -1254,7 +1254,7 @@ * Override with M201 * X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -1301,7 +1301,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 10.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -1574,7 +1574,7 @@ // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 0 // X and Y axis travel speed (mm/min) between probes #define XY_PROBE_FEEDRATE (133*60) @@ -1733,7 +1733,7 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false //#define INVERT_I_DIR false //#define INVERT_J_DIR false @@ -1745,7 +1745,7 @@ // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true // BMG mounted upside down so lever is accessible #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1776,9 +1776,9 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 +#define Z_HOME_DIR 1 //#define I_HOME_DIR -1 //#define J_HOME_DIR -1 //#define K_HOME_DIR -1 @@ -1804,16 +1804,16 @@ // @section geometry // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 110 +#define Y_BED_SIZE 110 // Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions. #define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE +#define X_MAX_POS X_BED_SIZE + 1 #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 115 // 110 //#define I_MIN_POS 0 //#define I_MAX_POS 50 //#define J_MIN_POS 0 @@ -1865,7 +1865,7 @@ #endif #if ANY(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -2026,7 +2026,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Commands to execute at the end of G29 probing. @@ -2187,12 +2187,12 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment @@ -2263,7 +2263,7 @@ #endif // Homing speeds (linear=mm/min, rotational=°/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (10*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -2341,13 +2341,13 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. - //#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build. #endif // @section host @@ -2380,17 +2380,11 @@ // Preheat Constants - Up to 10 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_TEMP_CHAMBER 35 +#define PREHEAT_1_TEMP_HOTEND 210 +#define PREHEAT_1_TEMP_BED 50 +#define PREHEAT_1_TEMP_CHAMBER 0 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - // @section motion /** @@ -2404,11 +2398,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MAX_POS - 10), (Y_MIN_POS + 10), 20 } #define NOZZLE_PARK_MOVE 0 // Park motion: 0 = XY Move, 1 = X Only, 2 = Y Only, 3 = X before Y, 4 = Y before X #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) @@ -2538,9 +2532,9 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) - #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print. A value of 0 will save stats at end of print. + #define PRINTCOUNTER_SAVE_INTERVAL 0 // (minutes) EEPROM save interval during print. A value of 0 will save stats at end of print. #endif // @section security @@ -2631,14 +2625,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2655,7 +2649,7 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 5 // // Use this option to override the number of step signals required to @@ -2711,8 +2705,8 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU -//#define INDIVIDUAL_AXIS_HOMING_SUBMENU +#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_SUBMENU // // SPEAKER/BUZZER @@ -2720,7 +2714,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -3026,7 +3020,7 @@ // // Connect to EXP1 on RAMPS and compatible boards. // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // BigTreeTech TFT35 // // Ender-2 OEM display, a variant of the MKS_MINI_12864 @@ -3443,20 +3437,20 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. // However, control resolution will be halved for each increment; // at zero value, there are 128 effective control positions. // :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 +#define SOFT_PWM_SCALE 1 // If SOFT_PWM_SCALE is set to a value higher than 0, dithering can // be used to mitigate the associated resolution loss. If enabled, // some of the PWM cycles are stretched so on average the desired // duty cycle is attained. -//#define SOFT_PWM_DITHER +#define SOFT_PWM_DITHER // @section extras diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 3208364c3c2e2..86b3131d8790a 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -575,7 +575,7 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLER_FAN_PIN FAN2_PIN // Set a custom pin for the controller fan //#define CONTROLLER_FAN2_PIN -1 // Set a custom pin for second controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled. @@ -602,7 +602,7 @@ * gets it spinning reliably for a short time before setting the requested speed. * (Does not work on Sanguinololu with FAN_SOFT_PWM.) */ -//#define FAN_KICKSTART_TIME 100 // (ms) +#define FAN_KICKSTART_TIME 700 // (ms) //#define FAN_KICKSTART_POWER 180 // 64-255 // Some coolers may require a non-zero "off" state. @@ -620,7 +620,7 @@ * * Define one or both of these to override the default 0-255 range. */ -//#define FAN_MIN_PWM 50 +#define FAN_MIN_PWM 39 //#define FAN_MAX_PWM 128 /** @@ -664,7 +664,7 @@ /** * Assign more PWM fans for part cooling, synchronized with Fan 0 */ -//#define REDUNDANT_PART_COOLING_FAN 1 // Index of the first fan to synchronize with Fan 0 +#define REDUNDANT_PART_COOLING_FAN 2 // Index of the first fan to synchronize with Fan 0 #ifdef REDUNDANT_PART_COOLING_FAN //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif @@ -681,7 +681,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN FAN1_PIN #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -923,17 +923,17 @@ * the position of the toolhead relative to the workspace. */ -//#define SENSORLESS_BACKOFF_MM { 2, 2, 0 } // (linear=mm, rotational=°) Backoff from endstops before sensorless homing +#define SENSORLESS_BACKOFF_MM { 5, 5, 2 } // (linear=mm, rotational=°) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (linear=mm, rotational=°) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 0, 0, 2 } // (linear=mm, rotational=°) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (linear=mm, rotational=°) Backoff from endstops after homing +#define HOMING_BACKOFF_POST_MM { 2, 2, 1 } // (linear=mm, rotational=°) Backoff from endstops after homing //#define XY_COUNTERPART_BACKOFF_MM 0 // (mm) Backoff X after homing Y, and vice-versa //#define QUICK_HOME // If G28 contains XY do a diagonal move first -//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X -//#define HOME_Z_FIRST // Home Z first. Requires a real endstop (not a probe). +#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X +#define HOME_Z_FIRST // Home Z first. Requires a real endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first // @section bltouch @@ -1200,20 +1200,20 @@ * X<1> Set the given parameters only for the X axis. * Y<1> Set the given parameters only for the Y axis. */ -//#define INPUT_SHAPING_X -//#define INPUT_SHAPING_Y +#define INPUT_SHAPING_X +#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.0f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.0f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + #define SHAPING_MIN_FREQ 5 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. - //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. + #define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif // @section motion @@ -1243,7 +1243,7 @@ #define DEFAULT_STEPPER_TIMEOUT_SEC 120 #define DISABLE_IDLE_X #define DISABLE_IDLE_Y -#define DISABLE_IDLE_Z // Disable if the nozzle could fall onto your printed part! +//#define DISABLE_IDLE_Z // Disable if the nozzle could fall onto your printed part! //#define DISABLE_IDLE_I //#define DISABLE_IDLE_J //#define DISABLE_IDLE_K @@ -1263,7 +1263,7 @@ // Increase the slowdown divisor for larger buffer sizes. #define SLOWDOWN #if ENABLED(SLOWDOWN) - #define SLOWDOWN_DIVISOR 2 + #define SLOWDOWN_DIVISOR 4 #endif /** @@ -1469,7 +1469,7 @@ // @section lcd #if HAS_MANUAL_MOVE_MENU - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel + #define MANUAL_FEEDRATE { 50*60, 50*60, 10*60, 6*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" @@ -1528,7 +1528,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1552,7 +1552,7 @@ #define MANUAL_MOVE_DISTANCE_DEG 90, 45, 22.5, 5, 1 // (°) // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM + #define TURBO_BACK_MENU_ITEM // Insert a menu for preheating at the top level to allow for quick access //#define PREHEAT_SHORTCUT_MENU_ITEM @@ -1577,21 +1577,21 @@ #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 3000 // (ms) Total Duration to display the boot screen(s) #if ANY(HAS_MARLINUI_U8GLIB, TFT_COLOR_UI) - #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving lots of flash) + //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving lots of flash) #endif #if HAS_MARLINUI_U8GLIB - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~3260 (or ~940) bytes of flash. + #define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~3260 (or ~940) bytes of flash. #endif #if ANY(HAS_MARLINUI_U8GLIB, TOUCH_UI_FTDI_EVE) - //#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. + #define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. #endif #endif #if HAS_MARLINUI_U8GLIB - //#define CUSTOM_STATUS_SCREEN_IMAGE // Show the bitmap in Marlin/_Statusscreen.h on the status screen. + #define CUSTOM_STATUS_SCREEN_IMAGE // Show the bitmap in Marlin/_Statusscreen.h on the status screen. #endif - //#define SOUND_MENU_ITEM // Add a mute option to the LCD menu + #define SOUND_MENU_ITEM // Add a mute option to the LCD menu #define SOUND_ON_DEFAULT // Buzzer/speaker default enabled state #if HAS_WIRED_LCD @@ -1602,7 +1602,7 @@ //#define LCD_TIMEOUT_TO_STATUS 15000 // (ms) // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // Apply a timeout to low-priority status messages //#define STATUS_MESSAGE_TIMEOUT_SEC 30 // (seconds) @@ -1654,12 +1654,12 @@ #endif // Add 'M73' to set print job progress, overrides Marlin's built-in estimate -//#define SET_PROGRESS_MANUALLY +#define SET_PROGRESS_MANUALLY #if ENABLED(SET_PROGRESS_MANUALLY) #define SET_PROGRESS_PERCENT // Add 'P' parameter to set percentage done #define SET_REMAINING_TIME // Add 'R' parameter to set remaining time - //#define SET_INTERACTION_TIME // Add 'C' parameter to set time until next filament change or other user interaction - //#define M73_REPORT // Report M73 values to host + #define SET_INTERACTION_TIME // Add 'C' parameter to set time until next filament change or other user interaction + #define M73_REPORT // Report M73 values to host #if ALL(M73_REPORT, HAS_MEDIA) #define M73_REPORT_SD_ONLY // Report only when printing from SD #endif @@ -1669,7 +1669,7 @@ #if HAS_DISPLAY && ANY(HAS_MEDIA, SET_PROGRESS_MANUALLY) #define SHOW_PROGRESS_PERCENT // Show print progress percentage (doesn't affect progress bar) #define SHOW_ELAPSED_TIME // Display elapsed printing time (prefix 'E') - //#define SHOW_REMAINING_TIME // Display estimated time to completion (prefix 'R') + #define SHOW_REMAINING_TIME // Display estimated time to completion (prefix 'R') #if ENABLED(SET_INTERACTION_TIME) #define SHOW_INTERACTION_TIME // Display time until next user interaction ('C' = filament change) #endif @@ -1710,8 +1710,8 @@ #define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place + #define SD_FINISHED_STEPPERRELEASE false // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84XYE" // Use "M84XYE" to keep Z enabled so your bed stays in place // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. @@ -1727,7 +1727,7 @@ //#define MEDIA_MENU_AT_TOP // Force the media menu to be listed on the top of the main menu - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G28XYZ\nM84XYE" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1807,11 +1807,11 @@ // LCD's font must contain the characters. Check your selected LCD language. //#define UTF_FILENAME_SUPPORT - //#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' + #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 ' and list long filenames with 'M20 L' //#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol //#define M20_TIMESTAMP_SUPPORT // Include timestamps by adding the 'T' flag to M20 commands - //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu + #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu //#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!) @@ -1827,7 +1827,7 @@ //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file - //#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' + #define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S' /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1912,7 +1912,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1956,7 +1956,7 @@ // A bigger font is available for edit items. Costs 3120 bytes of flash. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT + #define USE_BIG_EDIT_FONT // A smaller font may be used on the Info Screen. Costs 2434 bytes of flash. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. @@ -2262,9 +2262,9 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - //#define EP_BABYSTEPPING // M293/M294 babystepping with EMERGENCY_PARSER support + #define EP_BABYSTEPPING // M293/M294 babystepping with EMERGENCY_PARSER support //#define BABYSTEP_WITHOUT_HOMING //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement) //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! @@ -2273,11 +2273,11 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. + #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. #endif @@ -2309,12 +2309,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) #if ENABLED(DISTINCT_E_FACTORS) #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder #else - #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders + #define ADVANCE_K 0 // (mm) Compression length applying to all extruders #endif //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L. //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. @@ -2595,7 +2595,7 @@ #if ALL(HAS_MEDIA, DIRECT_STEPPING) #define BLOCK_BUFFER_SIZE 8 #elif HAS_MEDIA - #define BLOCK_BUFFER_SIZE 16 + #define BLOCK_BUFFER_SIZE 32 #else #define BLOCK_BUFFER_SIZE 16 #endif @@ -2604,7 +2604,7 @@ // The ASCII buffer for serial input #define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define BUFSIZE 32 // Transmission to Host Buffer Size // To save 386 bytes of flash (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -2613,7 +2613,7 @@ // For debug-echo: 128 bytes for the optimal speed. // Other output doesn't need to be that speedy. // :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 +#define TX_BUFFER_SIZE 32 // Host Receive Buffer Size // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. @@ -2651,7 +2651,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2682,14 +2682,14 @@ //#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. #define SERIAL_OVERRUN_PROTECTION // For serial echo, the number of digits after the decimal point -//#define SERIAL_FLOAT_PRECISION 4 +#define SERIAL_FLOAT_PRECISION 4 /** * This feature is EXPERIMENTAL so use with caution and test thoroughly. @@ -2884,27 +2884,27 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 100 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 50 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 600 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 50 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 560 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 4 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu @@ -2913,10 +2913,10 @@ //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_RETRACT 5 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload + #define FILAMENT_UNLOAD_PURGE_LENGTH 10 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_FEEDRATE 5 // (mm/s) feedrate to purge before unload #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. @@ -2924,10 +2924,10 @@ //#define FILAMENT_CHANGE_RESUME_ON_INSERT // Automatically continue / load filament when runout sensor is triggered again. //#define PAUSE_REHEAT_FAST_RESUME // Reduce number of waits by not prompting again post-timeout before continuing. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash. #endif @@ -2969,8 +2969,8 @@ #define INTERPOLATE true #if AXIS_IS_TMC_CONFIG(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing + #define X_CURRENT 1200 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT_HOME 960 // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... @@ -2989,8 +2989,8 @@ #endif #if AXIS_IS_TMC_CONFIG(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT + #define Y_CURRENT 1200 + #define Y_CURRENT_HOME 960 #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 #define Y_CHAIN_POS -1 @@ -3009,7 +3009,7 @@ #endif #if AXIS_IS_TMC_CONFIG(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 850 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -3109,7 +3109,7 @@ #endif #if AXIS_IS_TMC_CONFIG(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 550 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -3300,12 +3300,12 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) - //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) + //#define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING_X CHOPPER_09STEP_24V // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X - //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) + #define CHOPPER_TIMING_Y CHOPPER_09STEP_24V // For Y Axes (override below) //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y - //#define CHOPPER_TIMING_Z CHOPPER_TIMING // For Z Axes (override below) + #define CHOPPER_TIMING_Z CHOPPER_DEFAULT_24V // For Z Axes (override below) //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z //#define CHOPPER_TIMING_Z4 CHOPPER_TIMING_Z @@ -3315,7 +3315,7 @@ //#define CHOPPER_TIMING_U CHOPPER_TIMING // For U Axis //#define CHOPPER_TIMING_V CHOPPER_TIMING // For V Axis //#define CHOPPER_TIMING_W CHOPPER_TIMING // For W Axis - //#define CHOPPER_TIMING_E CHOPPER_TIMING // For Extruders (override below) + #define CHOPPER_TIMING_E CHOPPER_DEFAULT_24V // For Extruders (override below) //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E @@ -3354,11 +3354,11 @@ * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. * M913 X/Y/Z/E to live tune the setting */ - //#define HYBRID_THRESHOLD + #define HYBRID_THRESHOLD - #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X_HYBRID_THRESHOLD 120 // [mm/s] #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 120 #define Y2_HYBRID_THRESHOLD 100 #define Z_HYBRID_THRESHOLD 3 #define Z2_HYBRID_THRESHOLD 3 @@ -3405,13 +3405,13 @@ * Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis. * @section tmc/stallguard */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only + #define SENSORLESS_HOMING // StallGuard capable drivers only #if ANY(SENSORLESS_HOMING, SENSORLESS_PROBING) // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 + #define X_STALL_SENSITIVITY 108 // 100 #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 + #define Y_STALL_SENSITIVITY 130 // 100 #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY //#define Z_STALL_SENSITIVITY 8 //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY @@ -3444,7 +3444,7 @@ /** * Step on both rising and falling edge signals (as with a square wave). */ - //#define EDGE_STEPPING + #define EDGE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. @@ -3881,7 +3881,7 @@ /** * Extra options for the M114 "Current Position" report */ -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. @@ -3891,7 +3891,7 @@ */ //#define AUTO_REPORT_FANS -//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others) +#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others) /** * Auto-report temperatures with M155 S @@ -3904,7 +3904,7 @@ /** * Auto-report position with M154 S */ -//#define AUTO_REPORT_POSITION +#define AUTO_REPORT_POSITION #if ENABLED(AUTO_REPORT_POSITION) //#define AUTO_REPORT_REAL_POSITION // Auto-report the real position #endif @@ -3918,7 +3918,7 @@ // Include capabilities in M115 output #define EXTENDED_CAPABILITIES_REPORT #if ENABLED(EXTENDED_CAPABILITIES_REPORT) - //#define M115_GEOMETRY_REPORT + #define M115_GEOMETRY_REPORT #endif #endif @@ -3981,7 +3981,7 @@ * * Execute certain G-code commands immediately after power-on. */ -//#define STARTUP_COMMANDS "M17 Z" +#define STARTUP_COMMANDS "G28 Z" /** * G-code Macros @@ -4113,12 +4113,12 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) //#define HOST_PAUSE_M76 // Tell the host to pause in response to M76 - //#define HOST_PROMPT_SUPPORT // Initiate host prompts to get user feedback + #define HOST_PROMPT_SUPPORT // Initiate host prompts to get user feedback #if ENABLED(HOST_PROMPT_SUPPORT) - //#define HOST_STATUS_NOTIFICATIONS // Send some status messages to the host as notifications + #define HOST_STATUS_NOTIFICATIONS // Send some status messages to the host as notifications #endif //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start //#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down diff --git a/Marlin/_Bootscreen.h b/Marlin/_Bootscreen.h new file mode 100644 index 0000000000000..95f1035c14429 --- /dev/null +++ b/Marlin/_Bootscreen.h @@ -0,0 +1,88 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +/** + * Made with Marlin Bitmap Converter + * https://marlinfw.org/tools/u8glib/converter.html + * + * This bitmap from the file 'rook_boot_screen.png' + */ + +#define CUSTOM_BOOTSCREEN_BMPWIDTH 95 + +const unsigned char custom_start_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B11111111,B11000000,B00011111,B11111000,B00000011,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B11111111,B11000000,B00011111,B11111000,B00000011,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B11111111,B11000000,B00011111,B11111000,B00000011,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B11111111,B11000000,B00011111,B11111000,B00000011,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B11111111,B11000000,B00011111,B11111000,B00000011,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B11111111,B11000000,B00011111,B11111000,B00000011,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B11111111,B11000000,B00011111,B11111000,B00000011,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B11111111,B11000000,B00011111,B11111000,B00000011,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B11111111,B11000000,B00011111,B11111000,B00000011,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B11111111,B11000000,B00011111,B11111000,B00000011,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B01111111,B11111111,B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00011111,B11111111,B11111111,B11111111,B11111111,B11111000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00001111,B11111111,B11111111,B11111111,B11111111,B11110000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100111,B11110000, + B00000000,B00000000,B00000111,B00000000,B00011100,B00000000,B00000000,B00000000,B00000000,B00011111,B11100111,B11111000, + B11111111,B00000000,B00000111,B00000000,B00011100,B00000000,B00000000,B00000000,B00000000,B00011111,B11100111,B11111100, + B11111111,B10000000,B00000111,B00000000,B00011100,B00000000,B00000000,B00000000,B00000000,B00000001,B11000111,B00011110, + B11100001,B11000011,B10000111,B00001110,B00011101,B11000011,B11000011,B10001110,B11101110,B00000011,B10000111,B00001110, + B11100001,B11001111,B11100111,B00111111,B10011111,B11100111,B11110011,B10001110,B11111111,B00000011,B10000111,B00001110, + B11100001,B11011100,B11100111,B01110011,B10011110,B11110110,B00111011,B10001110,B11110111,B10000111,B11100111,B00001110, + B11100001,B11011000,B01110111,B01100001,B11011100,B01110000,B00111011,B10001110,B11100011,B10000111,B11110111,B00001110, + B11111111,B10011000,B01110111,B01100001,B11011100,B01110011,B11111011,B10001110,B11100011,B10000000,B01110111,B00001110, + B11111111,B00011000,B01110111,B01100001,B11011100,B01110111,B11111011,B10001110,B11100011,B10000000,B01110111,B00011110, + B11100011,B10011100,B01110111,B01110001,B11011100,B01110110,B00111011,B10001110,B11100011,B10111000,B11110111,B11111100, + B11100011,B11001111,B11100111,B00111111,B10011100,B01110111,B11111001,B11111110,B11100011,B10111111,B11100111,B11111000, + B11100001,B11000111,B11000111,B00011111,B00011100,B01110011,B11111000,B11111110,B11100011,B10011111,B11000111,B11110000 +}; diff --git a/Marlin/_Statusscreen.h b/Marlin/_Statusscreen.h new file mode 100644 index 0000000000000..0311bc09b06a4 --- /dev/null +++ b/Marlin/_Statusscreen.h @@ -0,0 +1,57 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +/** + * Made with Marlin Bitmap Converter + * https://marlinfw.org/tools/u8glib/converter.html + * + * This bitmap from the file 'rook_status_screen.png' + */ + +#define STATUS_LOGO_WIDTH 32 + +const unsigned char status_logo_bmp[] PROGMEM = { + B11111100,B00001111,B11000000,B11111100, + B11111100,B00001111,B11000000,B11111100, + B11111100,B00001111,B11000000,B11111100, + B11111100,B00001111,B11000000,B11111100, + B11111100,B00001111,B11000000,B11111100, + B11111100,B00001111,B11000000,B11111100, + B11111111,B11111111,B11111111,B11111100, + B11111111,B11111111,B11111111,B11111100, + B11111111,B11111111,B11111111,B11111100, + B11111111,B11111111,B11111111,B11111100, + B11111111,B11111111,B11111111,B11111100, + B11111111,B11111111,B11111111,B11111100, + B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000, + B11111111,B11111111,B11111111,B11111100, + B01111111,B11111111,B11111111,B11111000, + B00111111,B11111111,B11111111,B11110000, + B00011111,B11111111,B11111111,B11100000, + B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000, + B00011111,B11111111,B11111111,B11100000, + B00011111,B11111111,B11111111,B11100000, + B00011111,B11111111,B11111111,B11100000, + B00011111,B11111111,B11111111,B11100000 +}; diff --git a/README.md b/README.md index ac496aac21cd5..9489c81ed107c 100644 --- a/README.md +++ b/README.md @@ -1,154 +1,51 @@ -

MarlinFirmware's logo

+

Rook Model

-

Marlin 3D Printer Firmware

+

Marlin Firmware for Rolohaun Rook by LDO Motors
BigTreeTech SKR Mini E3 V3.0 / TFT35 / TL DDB (BMG)

- GPL-V3.0 License - Contributors - Last Release Date - CI Status - GitHub Sponsors + GPL-V3.0 License + Contributors + Last Commit Date + Rook CI Status + GitHub Sponsors
- Follow MarlinFirmware on Mastodon + Follow thisiskeithb on Twitter + Follow thisiskeithb on Mastodon

-Additional documentation can be found at the [Marlin Home Page](https://marlinfw.org/). -Please test this firmware and let us know if it misbehaves in any way. Volunteers are standing by! +> [!IMPORTANT] +> Hardware and parts list is incomplete and may change. -## Marlin 2.1 Bugfix Branch +## Specs -__Not for production use. Use with caution!__ +This firmware is configured for a [Rolohaun Rook](https://www.printables.com/model/387431-rook-mk1-3d-printer) by LDO Motors: -Marlin 2.1 takes this popular RepRap firmware to the next level by adding support for much faster 32-bit and ARM-based boards while improving support for 8-bit AVR boards. Read about Marlin's decision to use a "Hardware Abstraction Layer" below. +### Motherboard +* [BigTreeTech SKR Mini E3 V3.0](https://biqu.equipment/collections/control-board/products/bigtreetech-skr-mini-e3-v2-0-32-bit-control-board-for-ender-3) -This branch is for patches to the latest 2.1.x release version. Periodically this branch will form the basis for the next minor 2.1.x release. +### Motors +* LDO-42STH48-2504MAC(F) 0.9° for A & B +* LDO-42STH40-1684AC 1.8° for Z +* LDO-42STH25-1004AC 1.8° for E -Download earlier versions of Marlin on the [Releases page](https://github.com/MarlinFirmware/Marlin/releases). +> [!NOTE] +> Final motor list TBD -## Example Configurations +### Frame +* Kanrog's TBD bottom frame with reversible Z motor mount -Before you can build Marlin for your machine you'll need a configuration for your specific hardware. Upon request, your vendor will be happy to provide you with the complete source code and configurations for your machine, but you'll need to get updated configuration files if you want to install a newer version of Marlin. Fortunately, Marlin users have contributed dozens of tested configurations to get you started. Visit the [MarlinFirmware/Configurations](https://github.com/MarlinFirmware/Configurations) repository to find the right configuration for your hardware. +### Skirts +* Kanrog's TBD rear skirt with barrel jack power connector mount -## Building Marlin 2.1 +### Hotend + * [Trianglelab TCHC TR6 Hotend](https://trianglelab.net/products/trianglelab-tchc-tr6-hotend?VariantsId=10298) with TBD Rookery key & TBD spacer -To build and upload Marlin you will use one of these tools: +### Extruder + * [Trianglelab DDB Extruder (BMG)](https://trianglelab.net/products/trianglelab-tchc-tr6-hotend?VariantsId=10298) mounted with [Gulsifer's BMG mount](https://www.printables.com/model/536457-rook-bmg-mount) -- The free [Visual Studio Code](https://code.visualstudio.com/download) using the [Auto Build Marlin](https://marlinfw.org/docs/basics/auto_build_marlin.html) extension. -- The free [Arduino IDE](https://www.arduino.cc/en/main/software) : See [Building Marlin with Arduino](https://marlinfw.org/docs/basics/install_arduino.html) -- You can also use VSCode with devcontainer : See [Installing Marlin (VSCode devcontainer)](http://marlinfw.org/docs/basics/install_devcontainer_vscode.html). +### LCD +* [BigTreeTech TFT35](https://biqu.equipment/products/bigtreetech-tft35-v3-0-display-two-working-modes?_pos=2&_psq=tft35&_ss=e&_v=1.0) housed in [thisiskeithb's TFT35 case](https://www.printables.com/model/590965-bigtreetech-tft35-v3-rook-case) -Marlin is optimized to build with the **PlatformIO IDE** extension for **Visual Studio Code**. You can still build Marlin with **Arduino IDE**, and we hope to improve the Arduino build experience, but at this time PlatformIO is the better choice. - -## Hardware Abstraction Layer (HAL) - -Marlin includes an abstraction layer to provide a common API for all the platforms it targets. This allows Marlin code to address the details of motion and user interface tasks at the lowest and highest levels with no system overhead, tying all events directly to the hardware clock. - -Every new HAL opens up a world of hardware. At this time we need HALs for RP2040 and the Duet3D family of boards. A HAL that wraps an RTOS is an interesting concept that could be explored. Did you know that Marlin includes a Simulator that can run on Windows, macOS, and Linux? Join the Discord to help move these sub-projects forward! - -## 8-Bit AVR Boards - -A core tenet of this project is to keep supporting 8-bit AVR boards while also maintaining a single codebase that applies equally to all machines. We want casual hobbyists to benefit from the community's innovations as much as possible just as much as those with fancier machines. Plus, those old AVR-based machines are often the best for your testing and feedback! - -### Supported Platforms - - Platform|MCU|Example Boards - --------|---|------- - [Arduino AVR](https://www.arduino.cc/)|ATmega|RAMPS, Melzi, RAMBo - [Teensy++ 2.0](https://www.microchip.com/en-us/product/AT90USB1286)|AT90USB1286|Printrboard - [Arduino Due](https://www.arduino.cc/en/Guide/ArduinoDue)|SAM3X8E|RAMPS-FD, RADDS, RAMPS4DUE - [ESP32](https://github.com/espressif/arduino-esp32)|ESP32|FYSETC E4, E4d@BOX, MRR - [LPC1768](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc1700-cortex-m3/512-kb-flash-64-kb-sram-ethernet-usb-lqfp100-package:LPC1768FBD100)|ARM® Cortex-M3|MKS SBASE, Re-ARM, Selena Compact - [LPC1769](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc1700-cortex-m3/512-kb-flash-64-kb-sram-ethernet-usb-lqfp100-package:LPC1769FBD100)|ARM® Cortex-M3|Smoothieboard, Azteeg X5 mini, TH3D EZBoard - [STM32F103](https://www.st.com/en/microcontrollers-microprocessors/stm32f103.html)|ARM® Cortex-M3|Malyan M200, GTM32 Pro, MKS Robin, BTT SKR Mini - [STM32F401](https://www.st.com/en/microcontrollers-microprocessors/stm32f401.html)|ARM® Cortex-M4|ARMED, Rumba32, SKR Pro, Lerdge, FYSETC S6, Artillery Ruby - [STM32F7x6](https://www.st.com/en/microcontrollers-microprocessors/stm32f7x6.html)|ARM® Cortex-M7|The Borg, RemRam V1 - [STM32G0B1RET6](https://www.st.com/en/microcontrollers-microprocessors/stm32g0x1.html)|ARM® Cortex-M0+|BigTreeTech SKR mini E3 V3.0 - [STM32H743xIT6](https://www.st.com/en/microcontrollers-microprocessors/stm32h743-753.html)|ARM® Cortex-M7|BigTreeTech SKR V3.0, SKR EZ V3.0, SKR SE BX V2.0/V3.0 - [SAMD51P20A](https://www.adafruit.com/product/4064)|ARM® Cortex-M4|Adafruit Grand Central M4 - [Teensy 3.5](https://www.pjrc.com/store/teensy35.html)|ARM® Cortex-M4| - [Teensy 3.6](https://www.pjrc.com/store/teensy36.html)|ARM® Cortex-M4| - [Teensy 4.0](https://www.pjrc.com/store/teensy40.html)|ARM® Cortex-M7| - [Teensy 4.1](https://www.pjrc.com/store/teensy41.html)|ARM® Cortex-M7| - Linux Native|x86/ARM/etc.|Raspberry Pi - -## Submitting Patches - -Proposed patches should be submitted as a Pull Request against the ([bugfix-2.1.x](https://github.com/MarlinFirmware/Marlin/tree/bugfix-2.1.x)) branch. - -- This branch is for fixing bugs and integrating any new features for the duration of the Marlin 2.1.x life-cycle. -- Follow the [Coding Standards](https://marlinfw.org/docs/development/coding_standards.html) to gain points with the maintainers. -- Please submit Feature Requests and Bug Reports to the [Issue Queue](https://github.com/MarlinFirmware/Marlin/issues/new/choose). Support resources are also listed there. -- Whenever you add new features, be sure to add tests to `buildroot/tests` and then run your tests locally, if possible. - - It's optional: Running all the tests on Windows might take a long time, and they will run anyway on GitHub. - - If you're running the tests on Linux (or on WSL with the code on a Linux volume) the speed is much faster. - - You can use `make tests-all-local` or `make tests-single-local TEST_TARGET=...`. - - If you prefer Docker you can use `make tests-all-local-docker` or `make tests-all-local-docker TEST_TARGET=...`. - -## Marlin Support - -The Issue Queue is reserved for Bug Reports and Feature Requests. To get help with configuration and troubleshooting, please use the following resources: - -- [Marlin Documentation](https://marlinfw.org) - Official Marlin documentation -- [Marlin Discord](https://discord.gg/n5NJ59y) - Discuss issues with Marlin users and developers -- Facebook Group ["Marlin Firmware"](https://www.facebook.com/groups/1049718498464482/) -- RepRap.org [Marlin Forum](https://forums.reprap.org/list.php?415) -- Facebook Group ["Marlin Firmware for 3D Printers"](https://www.facebook.com/groups/3Dtechtalk/) -- [Marlin Configuration](https://www.youtube.com/results?search_query=marlin+configuration) on YouTube - -## Contributors - -Marlin is constantly improving thanks to a huge number of contributors from all over the world bringing their specialties and talents. Huge thanks are due to [all the contributors](https://github.com/MarlinFirmware/Marlin/graphs/contributors) who regularly patch up bugs, help direct traffic, and basically keep Marlin from falling apart. Marlin's continued existence would not be possible without them. - -## Administration - -Regular users can open and close their own issues, but only the administrators can do project-related things like add labels, merge changes, set milestones, and kick trolls. The current Marlin admin team consists of: - - - - -
Project Maintainer
- - 🇺🇸  **Scott Lahteine** -       [@thinkyhead](https://github.com/thinkyhead) -       [  Donate 💸  ](https://www.thinkyhead.com/donate-to-marlin) - - - - 🇺🇸  **Roxanne Neufeld** -       [@Roxy-3D](https://github.com/Roxy-3D) - - 🇺🇸  **Keith Bennett** -       [@thisiskeithb](https://github.com/thisiskeithb) -       [  Donate 💸  ](https://github.com/sponsors/thisiskeithb) - - 🇺🇸  **Jason Smith** -       [@sjasonsmith](https://github.com/sjasonsmith) - - - - 🇧🇷  **Victor Oliveira** -       [@rhapsodyv](https://github.com/rhapsodyv) - - 🇬🇧  **Chris Pepper** -       [@p3p](https://github.com/p3p) - -🇳🇿  **Peter Ellens** -       [@ellensp](https://github.com/ellensp) -       [  Donate 💸  ](https://ko-fi.com/ellensp) - - - - 🇺🇸  **Bob Kuhn** -       [@Bob-the-Kuhn](https://github.com/Bob-the-Kuhn) - - 🇳🇱  **Erik van der Zalm** -       [@ErikZalm](https://github.com/ErikZalm) -       [  Donate 💸  ](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software) - -
- -## License - -Marlin is published under the [GPL license](/LICENSE) because we believe in open development. The GPL comes with both rights and obligations. Whether you use Marlin firmware as the driver for your open or closed-source product, you must keep Marlin open, and you must provide your compatible Marlin source code to end users upon request. The most straightforward way to comply with the Marlin license is to make a fork of Marlin on Github, perform your modifications, and direct users to your modified fork. - -While we can't prevent the use of this code in products (3D printers, CNC, etc.) that are closed source or crippled by a patent, we would prefer that you choose another firmware or, better yet, make your own. +### Fans +* Hotend cooling fan is connected to `PC7` (`FAN1`) +* Part cooling fans are connected to `PC6` (`FAN0`) and `PB15` (`FAN2`) pins so no Y-splitter cable is needed. Marlin's `REDUNDANT_PART_COOLING_FAN` feature is used to run fans off separately controlled mosfets. diff --git a/buildroot/share/pixmaps/logo/rook.png b/buildroot/share/pixmaps/logo/rook.png new file mode 100644 index 0000000000000..9c607aa02c310 Binary files /dev/null and b/buildroot/share/pixmaps/logo/rook.png differ diff --git a/config/README.md b/config/README.md deleted file mode 100644 index b19527ccc30a8..0000000000000 --- a/config/README.md +++ /dev/null @@ -1,9 +0,0 @@ -# Where have all the configurations gone? - -Marlin configurations for specific machines are now maintained in their own repository at: - -## https://github.com/MarlinFirmware/Configurations/tree/bugfix-2.1.x - -Configuration files for use with the nightly `bugfix-2.1.x` branch can be downloaded from: - -## https://github.com/MarlinFirmware/Configurations/archive/bugfix-2.1.x.zip diff --git a/platformio.ini b/platformio.ini index e6adfe2b6be5b..aa3f9c9b5f075 100644 --- a/platformio.ini +++ b/platformio.ini @@ -13,7 +13,7 @@ [platformio] src_dir = Marlin boards_dir = buildroot/share/PlatformIO/boards -default_envs = mega2560 +default_envs = STM32G0B1RE_btt include_dir = Marlin extra_configs = Marlin/config.ini