I do no more own such a machine and can't test/debug/etc. you should move to this repo who's got lot of improvement: https://github.com/bulldog5046/ha_nespresso_ingetration/
Simple Nespresso Ble coffee machine integrations It's based on pygatt and need a bluetooth device ble compatible to read Nespresso information.
Note that you need to find your auth code from the officials apps.
It's much easy with reading thoses tutorials and example:
https://gist.github.com/farminf/94f681eaca2760212f457ac59da99f23
https://medium.com/@urish/reverse-engineering-a-bluetooth-lightbulb-56580fcb7546
Pygattl required bluez to be installed on the host
sudo apt install bluez
- Supports make a lungo coffee via service
- Supports reading lots of states
- Even more incoming
This conponent use the reversed one here: https://github.com/petergullberg/brewbutton .
It is completelly based on this integrations https://github.com/custom-components/sensor.airthings_wave . Thank's to Marty for is creation.
- platform: nespresso
mac: d2:12:f1:7b:cd:6d
resource: 8287ee82593d3c4e
scan_interval: 30
Where:
<mac>must be replace by the bluetooth mac address of the machine<resource>is the auth code that you must have catch with bluetooth sniffing the apps<scan_interval>Optionnal scant interval in seconds (default=300)
It could look looks like this:
