Skip to content

Latest commit

 

History

History
260 lines (182 loc) · 9.32 KB

Caching.rst

File metadata and controls

260 lines (182 loc) · 9.32 KB

The uWSGI caching framework

Note

This page is about "new-generation" cache introduced in uWSGI 1.9. For old-style cache (now simply named "web caching") check :doc:`WebCaching`

uWSGI includes a very fast, all-in-memory, zero-IPC, SMP-safe, constantly-optimizing, highly-tunable, key-value store simply called "the caching framework". A single uWSGI instance can create an unlimited number of "caches" each one with different setup and purpose.

Creating a "cache"

To create a cache you use the --cache2 option. It takes a dictionary of arguments specifying the cache configuration. To have a valid cache you need to specify its name and the maximum number of items it can contains.

uwsgi --cache2 name=mycache,items=100 --socket :3031

this will create a cache named "mycache" with a maximum of 100 items. Each item can be at most 64k.

A sad/weird/strange/bad note about "the maximum number of items"

If you start with a 100 item cache you will suddenly note that the true maximum number of items you can use is indeed 99.

This is because the first item of the cache is always internally used as "NULL/None/undef" item.

Remember this when you start planning your cache configuration.

Configuring the cache (how it works)

The uWSGI cache works like a file system. You have an area for storing keys (metadata) followed by a series of fixed size blocks in which to store the content of each key. Another memory area, the hash table is allocated for fast search of keys. When you request a key, it is first hashed over the hash table. Each hash points to a key in the metadata area. Keys can be linked to manage hash collisions. Each key has a reference to the block containing its value.

Single block (faster) vs. bitmaps (slower)

Warning

Bitmap mode is considered production ready only from uWSGI 2.0.2! (That is, it was buggy before that.)

In the standard ("single block") configuration a key can only map to a single block. Thus if you have a cache block size of 64k your items can be at most 65,535 bytes long. Conversely items smaller than that will still consume 64k of memory. The advantage of this approach is its simplicity and speed. The system does not need to scan the memory for free blocks every time you insert an object in the cache.

If you need a more versatile (but relatively slower) approach, you can enable the "bitmap" mode. Another memory area will be created containing a map of all of the used and free blocks of the cache. When you insert an item the bitmap is scanned for contiguous free blocks. Blocks must be contiguous, this could lead to a bit of fragmentation but it is not as big a problem as with disk storage, and you can always tune the block size to reduce fragmentation.

Persistent storage

You can store cache data in a backing store file to implement persistence. As this is managed by mmap() it is almost transparent to the user. You should not rely on this for data safety (disk syncing is managed asynchronously); use it only for performance purposes.

Network access

All of your caches can be accessed over the network. A request plugin named "cache" (modifier1 111) manages requests from external nodes. On a standard monolithic build of uWSGI the cache plugin is always enabled. The cache plugin works in a fully non-blocking way, and it is greenthreads/coroutine friendly so you can use technologies like gevent or Coro::AnyEvent with it safely.

UDP sync

This technique has been inspired by the STUD project, which uses something like this for SSL session scaling (and coincidentally the same approach can be used with uWSGI SSL/HTTPS routers). Basically whenever you set/update/delete an item from the cache, the operation is propagated to remote nodes via simple UDP packets. There are no built-in guarantees with UDP syncing so use it only for very specific purposes, like :doc:`SSLScaling`.

--cache2 options

This is the list of all of the options (and their aliases) of --cache2.

name

Set the name of the cache. Must be unique in an instance.

max-items || maxitems || items

Set the maximum number of cache items.

blocksize

Set the size (in bytes) of a single block.

blocks

Set the number of blocks in the cache. Useful only in bitmap mode, otherwise the number of blocks is equal to the maximum number of items.

hash

Set the hash algorithm used in the hash table. Currentl options are "djb33x" (default) and "murmur2".

hashsize || hash_size

this is the size of the hash table in bytes. Generally 65536 (the default) is a good value. Change it only if you know what you are doing or if you have a lot of collisions in your cache.

keysize || key_size

Set the maximum size of a key, in bytes (default 2048)

store

Set the filename for the persistent storage. If it doesn't exist, the system assumes an empty cache and the file will be created.

store_sync || storesync

Set the number of seconds after which msync() is called to flush memory cache on disk when in persistent mode. By default it is disabled leaving the decision-making to the kernel.

store_delete || storedelete

uWSGI, by default, will not start if a cache file exists and the store file does not match the configured items/blocksize. Setting this option will make uWSGI delete the existing file upon mismatch and create a new one.

node || nodes

A semicolon separated list of UDP servers which will receive UDP cache updates.

sync

A semicolon separated list of uwsgi addresses which the cache subsystem will connect to for getting a full dump of the cache. It can be used for initial cache synchronization. The first node sending a valid dump will stop the procedure.

udp || udp_servers || udp_server || udpserver

A semicolon separated list of UDP addresses on which to bind the cache to wait for UDP updates.

bitmap

Set to 1 to enable bitmap mode.

lastmod

Setting lastmod to 1 will update last_modified_at timestamp of each cache on every cache item modification. Enable it if you want to track this value or if other features depend on it. This value will then be accessible via the stats socket.

ignore_full

By default uWSGI will print warning message on every cache set operation if the cache is full. To disable this warning set this option. Available since 2.0.4

purge_lru

This option allows the caching framework to evict Least Recently Used (LRU) item when you try to add new item to cache storage that is full. The expires argument described below will be ignored. An item is considered used when it's accessed, added and updated by cache_get(), cache_set() and cache_update(); whereas the existence check by cache_exists() is not.

Accessing the cache from your applications using the cache api

You can access the various cache in your instance or on remote instances by using the cache API. Currently the following functions are exposed (each language might name them a bit differently from the standard):

  • cache_get(key[,cache])
  • cache_set(key,value[,expires,cache])
  • cache_update(key,value[,expires,cache])
  • cache_exists(key[,cache])
  • cache_del(key[,cache])
  • cache_clear([cache])

If the language/platform calling the cache API differentiates between strings and bytes (like Python 3 and Java) you have to assume that keys are strings and values are bytes (or bytearray in the java way). Otherwise keys and values are both strings in no specific encoding, as internally the cache values and keys are simple binary blobs.

The expires argument (default to 0 for disabled) is the number of seconds after the object is no more valid (and will be removed by the cache sweeper when purge_lru is not set, see below)

The cache argument is the so called "magic identifier". Its syntax is cache[@node].

To operate on the local cache "mycache" you set it as "mycache", while to operate on "yourcache" on the uWSGI server at 192.168.173.22 port 4040 the value will be [email protected]:4040.

An empty cache value means the default cache which is generally the first initialized. The default value is empty.

All of the network operations are transparent, fully non-blocking, and threads/greenthreads friendly.

The Cache sweeper thread

When at least one cache is configured without purge_lru and the master is enabled a thread named "the cache sweeper" is started. Its main purpose is deleting expired keys from the cache. So, if you want auto-expiring you need to enable the master.

Web caching

In its first incarnation the uWSGI caching framework was meant only for caching of web pages. The old system has been rebuilt. It is now named :doc:`WebCaching`. Enabling the old-style --cache option will create a cache named "default".

Monitoring caches

The stats server exposes cache information. An ncurses based tool (https://pypi.python.org/pypi/uwsgicachetop) exists that uses that information for real-time monitoring.