Skip to content

Latest commit

 

History

History
207 lines (177 loc) · 8.18 KB

CHANGELOG.rst

File metadata and controls

207 lines (177 loc) · 8.18 KB
Raw
Version explained:
  • major : codebase increase on incompatible changes
  • minor : increase on risk of code breakage during a major release
  • bug : increase on bug or incremental changes
Version 4.2.22
  • Fix: route reload for offline neighbors #1126 patch: Malcolm Dodds
  • Fix: make sure we compare next-hop self and next-hop IP correctly (#1153) reported: gitneep
  • Compatibility: remove "not-a-fragment" "!is-fragment" should be used instead
  • Upgrade six to the latest version
Version 4.2.21
  • Fix: regressing on announcing routes from the API #1108
Version 4.2.20
  • Fix: correctly filter routes announced by the API to the right peer #1005
  • Feature: healthcheck neighbor filtering and path-information backport of #1098 and #1099
  • Fix: backport #1101 fix parsing of FlowSpec TCPFlags with NS
  • Fix: backport #1102 fix parsing of Fragment with IPv6 destinations/sources
  • Fix: bug in CLI when failing to read data
Version 4.2.19
  • Feature: force PGP signing of tags
  • Feature: backport ICMP types
  • Fix: backport healthcheck setup_ips requiring a label backport by: Steven Honson
Version 4.2.18
  • Feature: add ICMP experimental codes reported: enag11
  • Feature: PGP signing releases
Version 4.2.17
  • Feature: add flags ECE, CW and NS to TCP, (not sure if any flowspec implementation uses them) #1053 reported by: enag11
  • Fix: bug with IGP Metric #1056 patch by: hkml2000
Version 4.2.16
  • Fix: bacckport of fix for #1051 tcp-flag operators != and &!= return syntax error reported by: enag11
Version 4.2.15
  • Fix: #1035 Socket remains in CLOSED state after the interface goes down patch: borjam
  • Fix: #1041 backport
Version 4.2.14
  • Fix: issue reading data from the peer reported by: isjerryxiao
  • Feature: allow IPv6 redirect patch by: rzalamena
  • Fix: fix decoding of path information (inbound vs outbound) reported by: isjerryxiao
Version 4.2.13
  • Fix: issue when there is no route to the peer and the connection looked like it established with the API reported by: iddq
  • Fix: healthcheck was not ending if/when exabgp did reported by: mzealey
  • Fix: issue with poller reported by: emilstahl97
Version 4.2.12
  • Fix: issue with flow fragment (issue #1027)
Version 4.2.11
  • Feature: new release code allowing the creation of zipapp

Version 4.2.10: * Fix: cache invalidation on clear command patch by: Boris Murashov

Version 4.2.9
  • Fix: healthcheck --sudo, --debug and --no-ack are not exclusive reported by: sincerywaing
Version 4.2.8:
  • Fix: restore python -m exabgp
Version 4.2.7:
  • Feature: logging parsing in debug mode will now print the JSON of updates
  • Fix: issue during restart
  • Fix: add ipv6 mpls to add-path patch by: adrian62
  • Fix: aggregator parsing when no space are used around () reported by: thomas955
  • Fix: high CPU load to do sleeptime in second and not ms reported by: Gary Buhrmaster
  • Change: BGP-LS TE-RIDs are now reported as a list (as Arista reports more than one) patch: tomjshine
  • reported: the RIB code so withdraw message before any announce are sent
    this does change the RIB behaviour sending withdrawal when it was not previously
  • Fix: bad parsing in some case when capability next-hop was used reported: alexejli
Version 4.2.6:
  • Fix: prevent the deletion of IP addresses not added by the healthchecker
Version 4.2.5:
  • Fix: Fix loopback detection without label issue patch by: Ruben Herold
Version 4.2.4:
  • Change: display next-hop in flow redirect (fixes a bug with route generation too) reported by: Cathal Mooney
Version 4.2.3:
  • Fix: issue with sending data toward API reported by: jkldgoefgkljefogeg
  • Fix: bug in spin prevention (true vs True)
  • Fix: peer and local ID for show neighbor commands
Version 4.2.2:
  • Fix: issue with new respawn feature breaking the API
Version 4.2.1:
  • Feature: use vendored ip_address module for healthcheck
  • Feature: respawn option under the process (disable re-starting the api program on failure)
  • Feature: support for single announcement for the healthcheck
Version 4.2.0:
  • Feature: Support additional sub-type of BGP-Prefix-SID for SRv6-VPN patch by: Hiroki SHIROKURA
  • Fix: issue with pypi release (can not pip install) reported by: Thomas Faivre
  • Fix: on 'restart' config could improperly interference with current config which leads to inconsystent state and crash patch by: Alexander Petrovsky
  • Feature: "rate-limit" (per neighbor) limit the number of BGP message(s) handled per second
  • Feature: support draft-ietf-idr-flowspec-redirect-02 (previously only simpson was supported) patch by: Eli Lindsey
  • Feature: BGP LS IPv6 parsing support patch by: Tinus Flagstad
  • Feature: healthcheck handle loopback for non-Linux machines
  • Fix: use local IP for router-id when the peer is auto-deteted (and not the remote IP)
  • Fix: potential python3/python2 bytes vs string issues when generating updates
  • Fix: label is mandatory when using RD, force it, and perform better checks on the configuration
  • Fix: sending route-refresh message via the API was broken reported by: Konrad Zemek
  • Fix: make sure exabgpcli does not hang when exabgp.api.ack is set to False patch by: basyron
  • Fix: not correctly recording AFI for next-hop self use
  • Fix: removal of ip address by healthcheck patch by: wavezhang
  • Fix: healthcheck on ^C during time.sleep, exit gracefully
  • Fix: healthcheck do not fail if the IP address exist when we are trying to add it
  • Fix: healthcheck correctly remove the IP address on going down if it was added
  • Fix: bug when parsing passive keyword alone (was false not true)
  • Fix: was not always terminating with error code 0 when all was good patch by: badrabubker
  • CHANGE: large change to the configuration code (should not have any effect but the devil is in the details)
  • CHANGE: using next-hop self could lead to route generated with a IPv6 next-hop in the IPv4 next-hop This COULD have been accepted by peers. This version does prevent such generation.
  • CHANGE: resolve symlink when reading the file and not when parsing the configuration reported by: juise (with alternative patch - thank you)
  • CHANGE: the reactor was changed from using select to poll (removing the 1024 limit on connections)
  • CHANGE: rewrote setup.py, moving release code into another file
Version 4.1.5:
  • Deleted: could not install via pip install
Version 4.1.4:
  • Deleted: could not install via pip install
Version 4.1.3:
  • Deleted: could not install via pip install
Version 4.1.2
  • Feature: exabgpcli autocomplete
  • Fix: exabgpcli was not correctly removing data on the pipe in case of issues
Version 4.1.1
  • CHANGE: some message are now printed using the log routes option and not parser anymore
  • Fix: bug with functional testing code when using python3 patch by: Cooper Lees
  • Fix: bug with ExaBGP cli not working reported by: jlixfeld (thank you to Cooper Lees for providing time and a test env. to reproduce)
Version 4.1.0
  • CHANGE: when redifining a single parameter option using inheritence the value will be replaced
  • CHANGE: FlowSpec TRUE and FALSE value have been updated to use the latest RFC and are therefore inverted from previous versions
  • CHANGE: an invalid netmask for a network will now cause ExaBGP to fail the parsing of the route (it can stop ExaBGP from starting with bad routes)
  • Feature: support for extended next-hop (RFC 5549)
  • Feature: implemented API for "clear adj-rib out" and "flush adj-rib out"
  • Fix: regression pointed in #873 patch: Malcolm Dodds
  • Fix: do not crash when trying to be helpful in presenting notification message reported by: Adam Jacob Muller
  • Fix: issue while handling ranged neighbors patch: Wenxin Wang
  • Fix: accumulating families when using multiple peers patch: Martin Topholm (reviewed)
  • Fix: could not reload configuration reported by: gbock
  • Feature: better RFC5575bis support, better treat as withdraw patch: Christoph Loibl
  • Fix: Fix issue when using peer ASN discovery patch: Zac Medico
  • Fix: MD5 encoding reported by: Adam Jacob Muller (with an initial idea for a patch)
  • Fix: ignore unknown BGP-LS SID reported by: MosesN
  • Fix: badly deciding when to send or not AddPath from parsing the Capability reported by: ivan-balan