使用 ESP32+传感器 获取阳台环境数据

Smarthome for Caravans and Motor Homes - System for measuring and displaying various values in caravans and motor homes, including climate values, fill levels and leveling data, energy data, propane/butane sensor. incl. display, config website, test routines, etc. Own circuit board created

My Take on a Raspberry Pi Weather station with a local web interface and API for local weather data

Pico W sends the sensor data via a TCP socket at 5-second intervals. - GPIO,ADC(voltage,temperature) and BME280 sensor data

Bosch's BME280_SensorAPI was ported to pi pico.(using C and pico-sdk, I2C)

ESP32 / ESP8266 / LoRa32 / CYD & BME280 / SHT2x / CCS811 / SML sensor with InfluxDB and MQTT support

FreshAir project for IOT exam

ESP32 based desk clock with DS3231, BME280 and BH1750

A Rust-based server for ESP32 that reads temperature, humidity, and pressure from a BME280 sensor using esp-idf-svc and esp-idf-hal

The IoT EcoBoard v3 is microcontroler based on the processor ATSAMD21G18 ARM Cortex M0 at 48Mhz with 3V3 logic, as the Arduino Zero. The chip has 256K of FLASH and 32K of RAM. It's fully compatible with Arduino and Adafruit libraries.

LINE bot for monitoring my rabbit with camera & thermometer.

In this project, the Bosch BMP280 sensor is integrated with an STM32 microcontroller using bare-metal, low-level register-based firmware. Communication is handled via I2C and SPI protocols. The firmware captures sensor data and outputs it to a 16x2 LCD display, demonstrating effective real-time data acquisition and display.

Code for reading various sensors attached to a Raspberry Pi 3 Model B, data is stored in an InfluxDB and visualized via Grafana

Code for reading various sensors attached to a Arduino ESP32, data is uploaded via WiFi to an InfluxDB or displayed.

Flipper Zero application for reading temperature, humidity and pressure sensors like a DHT11/22, DS18B20, BMP280, HTU21 and more

BME280 webserver using Arduino Mega, Ethernet shield and 0.96 OLED screen

Portable instrument for the measurement of indoor particulate matter in the 1-10 micron range

An MagicMirror² module which displays the current temperature and humidity measured by external scripts

Sandbox for experiments with SCD40 CO2 sensor

💧 Kernel space driver for Bosch Sensortec BME280 – combined temperature, pressure, humidity sensor. The driver allows using the sensor over I2C bus on a single-board computer like Raspberry Pi, Orange Pi, Asus Tinker Board, etc.