title | description |
---|---|
Konke 2AJZ4KPFT control via MQTT |
Integrate your Konke 2AJZ4KPFT via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendors bridge or gateway. |
To contribute to this page, edit the following file
| Model | 2AJZ4KPFT |
| Vendor | Konke |
| Description | Temperature and humidity sensor |
| Supports | temperature and humidity |
| Picture | |
How to use device type specific configuration
-
temperature_precision
: Controls the precision oftemperature
values, e.g.0
,1
or2
; default2
. To control the precision based on the temperature value set it to e.g.{30: 0, 10: 1}
, when temperature >= 30 precision will be 0, when temperature >= 10 precision will be 1. -
temperature_calibration
: Allows to manually calibrate temperature values, e.g.1
would add 1 degree to the temperature reported by the device; default0
. -
humidity_precision
: Controls the precision ofhumidity
values, e.g.0
,1
or2
; default2
. To control the precision based on the humidity value set it to e.g.{80: 0, 10: 1}
, when humidity >= 80 precision will be 0, when humidity >= 10 precision will be 1.
Konke devices only work on Zigbee channel 15, 20 and 25.
Although Home Assistant integration through MQTT discovery is preferred, manual integration is possible with the following configuration:
{% raw %}
sensor:
- platform: "mqtt"
state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
availability_topic: "zigbee2mqtt/bridge/state"
unit_of_measurement: "°C"
value_template: "{{ value_json.temperature }}"
device_class: "temperature"
sensor:
- platform: "mqtt"
state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
availability_topic: "zigbee2mqtt/bridge/state"
unit_of_measurement: "%"
value_template: "{{ value_json.humidity }}"
device_class: "humidity"
sensor:
- platform: "mqtt"
state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
availability_topic: "zigbee2mqtt/bridge/state"
unit_of_measurement: "%"
value_template: "{{ value_json.battery }}"
device_class: "battery"
sensor:
- platform: "mqtt"
state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
availability_topic: "zigbee2mqtt/bridge/state"
unit_of_measurement: "lqi"
value_template: "{{ value_json.linkquality }}"
icon: "mdi:signal"
{% endraw %}