404000_404005_404012.md

title	description
Müller Licht 404000/404005/404012 control via MQTT	Integrate your Müller Licht 404000/404005/404012 via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendors bridge or gateway.

To contribute to this page, edit the following file

Müller Licht 404000/404005/404012

| Model | 404000/404005/404012 | | Vendor | Müller Licht | | Description | Tint LED bulb GU10/E14/E27 350/470/806 lumen, dimmable, color, opal white | | Supports | on/off, brightness, color temperature, color xy | | Picture | |

Notes

Pairing

Turn the light bulb five times on and off. After turning it on the sixth time, it will indicate with colors that the bulb is pairing.

Device type specific configuration

How to use device type specific configuration

• transition: Controls the transition time (in seconds) of on/off, brightness, color temperature (if applicable) and color (if applicable) changes. Defaults to 0 (no transition). Note that this value is overridden if a transition value is present in the MQTT command payload.

• hue_correction: (optional) Corrects hue values based on a correction map for matching color rendition to other lights. Provide a minimum of 2 data sets in the correction map. To build a map:

  • choose one of your other lights to be the color reference
  • send a sample color to both lights (reference and non-reference)
  • modify hue value for non-reference light until it color matches the reference light
  • take note of the in and out values, where
    • in is the hue value you sent to your reference light
    • out is the hue value you had to dial your non-reference light to
  • repeat with a few other sample colors (4-5 should suffice)

  Example correction map:

  hue_correction:
      - in: 28
          out: 45
      - in: 89
          out: 109
      - in: 184
          out: 203
      - in: 334
          out: 318

Manual Home Assistant configuration

Although Home Assistant integration through MQTT discovery is preferred, manual integration is possible with the following configuration:

{% raw %}

light:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    brightness: true
    color_temp: true
    xy: true
    hs: false
    schema: "json"
    command_topic: "zigbee2mqtt/<FRIENDLY_NAME>/set"
    brightness_scale: 254
    effect: true
    effect_list: 
      - "blink"
      - "breathe"
      - "okay"
      - "channel_change"
      - "finish_effect"
      - "stop_effect"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    unit_of_measurement: "lqi"
    value_template: "{{ value_json.linkquality }}"
    icon: "mdi:signal"

{% endraw %}