DM_A60F.md

title	description
CY-LIGHTING DM A60F control via MQTT	Integrate your CY-LIGHTING DM A60F via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendors bridge or gateway.

To contribute to this page, edit the following file

CY-LIGHTING DM A60F

| Model | DM A60F | | Vendor | CY-LIGHTING | | Description | 6W smart dimmable E27 lamp 2700K | | Supports | on/off, brightness | | Picture | |

Notes

Pairing

Factory reset the light bulb by turning the bulb on/off seven times. After resetting the bulb will go into pairing mode for 20 seconds.

While pairing, keep the bulb close to the adapter.

Device type specific configuration

How to use device type specific configuration

• transition: Controls the transition time (in seconds) of on/off, brightness, color temperature (if applicable) and color (if applicable) changes. Defaults to 0 (no transition). Note that this value is overridden if a transition value is present in the MQTT command payload.

Manual Home Assistant configuration

Although Home Assistant integration through MQTT discovery is preferred, manual integration is possible with the following configuration:

{% raw %}

light:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    brightness: true
    color_temp: false
    xy: false
    hs: false
    schema: "json"
    command_topic: "zigbee2mqtt/<FRIENDLY_NAME>/set"
    brightness_scale: 254
    effect: true
    effect_list: 
      - "blink"
      - "breathe"
      - "okay"
      - "channel_change"
      - "finish_effect"
      - "stop_effect"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    unit_of_measurement: "lqi"
    value_template: "{{ value_json.linkquality }}"
    icon: "mdi:signal"

{% endraw %}