Skip to content

Latest commit

 

History

History
65 lines (52 loc) · 2.01 KB

DNCKATSD001.md

File metadata and controls

65 lines (52 loc) · 2.01 KB
title description
Custom devices (DiY) DNCKATSD001 control via MQTT
Integrate your Custom devices (DiY) DNCKATSD001 via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendors bridge or gateway.

To contribute to this page, edit the following file

Custom devices (DiY) DNCKATSD001

| Model | DNCKATSD001 | | Vendor | Custom devices (DiY) | | Description | DNCKAT single key wired wall dimmable light switch | | Supports | on/off, brightness | | Picture | Custom devices (DiY) DNCKATSD001 |

Notes

Device type specific configuration

How to use device type specific configuration

  • transition: Controls the transition time (in seconds) of on/off, brightness, color temperature (if applicable) and color (if applicable) changes. Defaults to 0 (no transition). Note that this value is overridden if a transition value is present in the MQTT command payload.

Manual Home Assistant configuration

Although Home Assistant integration through MQTT discovery is preferred, manual integration is possible with the following configuration:

{% raw %}

light:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    brightness: true
    color_temp: false
    xy: false
    hs: false
    schema: "json"
    command_topic: "zigbee2mqtt/<FRIENDLY_NAME>/set"
    brightness_scale: 254
    effect: true
    effect_list: 
      - "blink"
      - "breathe"
      - "okay"
      - "channel_change"
      - "finish_effect"
      - "stop_effect"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    unit_of_measurement: "lqi"
    value_template: "{{ value_json.linkquality }}"
    icon: "mdi:signal"

{% endraw %}