Skip to content

Latest commit

 

History

History
96 lines (78 loc) · 3.02 KB

GL-FL-005TZ.md

File metadata and controls

96 lines (78 loc) · 3.02 KB
title description
Gledopto GL-FL-005TZ control via MQTT
Integrate your Gledopto GL-FL-005TZ via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendors bridge or gateway.

To contribute to this page, edit the following file

Gledopto GL-FL-005TZ

| Model | GL-FL-005TZ | | Vendor | Gledopto | | Description | Zigbee 30W floodlight RGB CCT | | Supports | on/off, brightness, color temperature, color xy | | Picture | Gledopto GL-FL-005TZ |

Notes

Pairing

  1. Switch on your device.
  2. Now switch off and on within 2 seconds.
  3. Repeat off/on four times.
  4. Reset is done when the device is switched on in the fifth time and the light stays on after blinking 4 times

Device type specific configuration

How to use device type specific configuration

  • transition: Controls the transition time (in seconds) of on/off, brightness, color temperature (if applicable) and color (if applicable) changes. Defaults to 0 (no transition). Note that this value is overridden if a transition value is present in the MQTT command payload.

  • hue_correction: (optional) Corrects hue values based on a correction map for matching color rendition to other lights. Provide a minimum of 2 data sets in the correction map. To build a map:

    • choose one of your other lights to be the color reference
    • send a sample color to both lights (reference and non-reference)
    • modify hue value for non-reference light until it color matches the reference light
    • take note of the in and out values, where
      • in is the hue value you sent to your reference light
      • out is the hue value you had to dial your non-reference light to
    • repeat with a few other sample colors (4-5 should suffice)

    Example correction map:

    hue_correction:
    - in: 28
        out: 45
    - in: 89
        out: 109
    - in: 184
        out: 203
    - in: 334
        out: 318

Manual Home Assistant configuration

Although Home Assistant integration through MQTT discovery is preferred, manual integration is possible with the following configuration:

{% raw %}

light:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    brightness: true
    color_temp: true
    xy: true
    hs: false
    schema: "json"
    command_topic: "zigbee2mqtt/<FRIENDLY_NAME>/set"
    brightness_scale: 254
    effect: true
    effect_list: 
      - "blink"
      - "breathe"
      - "okay"
      - "channel_change"
      - "finish_effect"
      - "stop_effect"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    unit_of_measurement: "lqi"
    value_template: "{{ value_json.linkquality }}"
    icon: "mdi:signal"

{% endraw %}