Skip to content

Latest commit

 

History

History
103 lines (83 loc) · 3.28 KB

NCZ-3043-HA.md

File metadata and controls

103 lines (83 loc) · 3.28 KB
title description
Nyce NCZ-3043-HA control via MQTT
Integrate your Nyce NCZ-3043-HA via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendors bridge or gateway.

To contribute to this page, edit the following file

Nyce NCZ-3043-HA

| Model | NCZ-3043-HA | | Vendor | Nyce | | Description | Ceiling motion sensor | | Supports | motion, humidity and temperature | | Picture | Nyce NCZ-3043-HA |

Notes

Device type specific configuration

How to use device type specific configuration

  • temperature_precision: Controls the precision of temperature values, e.g. 0, 1 or 2; default 2. To control the precision based on the temperature value set it to e.g. {30: 0, 10: 1}, when temperature >= 30 precision will be 0, when temperature >= 10 precision will be 1.

  • temperature_calibration: Allows to manually calibrate temperature values, e.g. 1 would add 1 degree to the temperature reported by the device; default 0.

  • humidity_precision: Controls the precision of humidity values, e.g. 0, 1 or 2; default 2. To control the precision based on the humidity value set it to e.g. {80: 0, 10: 1}, when humidity >= 80 precision will be 0, when humidity >= 10 precision will be 1.

Manual Home Assistant configuration

Although Home Assistant integration through MQTT discovery is preferred, manual integration is possible with the following configuration:

{% raw %}

binary_sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    value_template: "{{ value_json.occupancy }}"
    payload_on: true
    payload_off: false
    device_class: "motion"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    unit_of_measurement: "%"
    value_template: "{{ value_json.humidity }}"
    device_class: "humidity"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    unit_of_measurement: "°C"
    value_template: "{{ value_json.temperature }}"
    device_class: "temperature"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    unit_of_measurement: "%"
    value_template: "{{ value_json.battery }}"
    device_class: "battery"

binary_sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    value_template: "{{ value_json.battery_low }}"
    payload_on: true
    payload_off: false
    device_class: "battery"

binary_sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    value_template: "{{ value_json.tamper }}"
    payload_on: true
    payload_off: false

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    unit_of_measurement: "lqi"
    value_template: "{{ value_json.linkquality }}"
    icon: "mdi:signal"

{% endraw %}