title | description |
---|---|
Feibit STH01ZB control via MQTT |
Integrate your Feibit STH01ZB via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendors bridge or gateway. |
To contribute to this page, edit the following file
| Model | STH01ZB |
| Vendor | Feibit |
| Description | Smart temperature & humidity Sensor |
| Supports | temperature, humidity |
| Picture | |
How to use device type specific configuration
-
temperature_precision
: Controls the precision oftemperature
values, e.g.0
,1
or2
; default2
. To control the precision based on the temperature value set it to e.g.{30: 0, 10: 1}
, when temperature >= 30 precision will be 0, when temperature >= 10 precision will be 1. -
temperature_calibration
: Allows to manually calibrate temperature values, e.g.1
would add 1 degree to the temperature reported by the device; default0
. -
humidity_precision
: Controls the precision ofhumidity
values, e.g.0
,1
or2
; default2
. To control the precision based on the humidity value set it to e.g.{80: 0, 10: 1}
, when humidity >= 80 precision will be 0, when humidity >= 10 precision will be 1.
Although Home Assistant integration through MQTT discovery is preferred, manual integration is possible with the following configuration:
{% raw %}
sensor:
- platform: "mqtt"
state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
availability_topic: "zigbee2mqtt/bridge/state"
unit_of_measurement: "°C"
value_template: "{{ value_json.temperature }}"
device_class: "temperature"
sensor:
- platform: "mqtt"
state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
availability_topic: "zigbee2mqtt/bridge/state"
unit_of_measurement: "%"
value_template: "{{ value_json.humidity }}"
device_class: "humidity"
sensor:
- platform: "mqtt"
state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
availability_topic: "zigbee2mqtt/bridge/state"
unit_of_measurement: "%"
value_template: "{{ value_json.battery }}"
device_class: "battery"
sensor:
- platform: "mqtt"
state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
availability_topic: "zigbee2mqtt/bridge/state"
unit_of_measurement: "lqi"
value_template: "{{ value_json.linkquality }}"
icon: "mdi:signal"
{% endraw %}