STS-WTR-250.md

title	description
SmartThings STS-WTR-250 control via MQTT	Integrate your SmartThings STS-WTR-250 via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendors bridge or gateway.

To contribute to this page, edit the following file

SmartThings STS-WTR-250

| Model | STS-WTR-250 | | Vendor | SmartThings | | Description | Water leak sensor (2016 model) | | Supports | water leak | | Picture | |

Notes

None

Manual Home Assistant configuration

Although Home Assistant integration through MQTT discovery is preferred, manual integration is possible with the following configuration:

{% raw %}

binary_sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    value_template: "{{ value_json.water_leak }}"
    payload_on: true
    payload_off: false
    device_class: "moisture"

binary_sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    value_template: "{{ value_json.battery_low }}"
    payload_on: true
    payload_off: false
    device_class: "battery"

binary_sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    value_template: "{{ value_json.tamper }}"
    payload_on: true
    payload_off: false

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    unit_of_measurement: "%"
    value_template: "{{ value_json.battery }}"
    device_class: "battery"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    unit_of_measurement: "°C"
    value_template: "{{ value_json.temperature }}"
    device_class: "temperature"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    unit_of_measurement: "lqi"
    value_template: "{{ value_json.linkquality }}"
    icon: "mdi:signal"

{% endraw %}