TH1400ZB.md

title	description
Sinope TH1400ZB control via MQTT	Integrate your Sinope TH1400ZB via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendors bridge or gateway.

To contribute to this page, edit the following file

Sinope TH1400ZB

| Model | TH1400ZB | | Vendor | Sinope | | Description | Zigbee low volt thermostat | | Supports | local temp, units, keypad lockout, mode, state, backlight, outdoor temp, time | | Picture | |

Notes

None

Manual Home Assistant configuration

Although Home Assistant integration through MQTT discovery is preferred, manual integration is possible with the following configuration:

{% raw %}

climate:
  - platform: "mqtt"
    availability_topic: "zigbee2mqtt/bridge/state"
    temperature_unit: "C"
    min_temp: "7"
    max_temp: "30"
    mode_state_topic: true
    mode_state_template: "{{ value_json.system_mode }}"
    mode_command_topic: true
    current_temperature_topic: true
    current_temperature_template: "{{ value_json.local_temperature }}"
    temp_step: 1
    action_topic: true
    action_template: "{% set values = {'idle':'off','heat':'heating','cool':'cooling','fan only':'fan'} %}{{ values[value_json.running_state] }}"
    modes: 
      - "off"
      - "auto"
      - "heat"
    temperature_state_topic: true
    temperature_state_template: "{{ value_json.occupied_heating_setpoint }}"
    temperature_command_topic: "occupied_heating_setpoint"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    icon: "mdi:signal"
    unit_of_measurement: "lqi"
    value_template: "{{ value_json.linkquality }}"

{% endraw %}