The goal of this file is to have a place to easily commit answers to questions in a way that's easily searchable, and can make its way into official documentation later.
You may have been linked to this FAQ because you used the term "CoreOS". This can be a few things.
There's the original Container Linux that started from http://coreos.com/ (also a company RHT acquired)
More recently, there are two successors to Container Linux (original CoreOS)
- Fedora CoreOS
- Red Hat Enterprise Linux CoreOS, a part of OpenShift 4
It's generally preferred that instead of saying "CoreOS", to explicitly use one of the shorter forms "FCOS" (for Fedora CoreOS) or "RHCOS" for RHEL CoreOS.
FCOS and RHCOS share Ignition and rpm-ostree as key technologies.
Fedora CoreOS also acts as one upstream for RHEL CoreOS, although RHEL CoreOS uses RHEL content.
We use these terms because e.g. RHEL CoreOS is Red Hat Enterprise Linux, more than it's not. It inherits most of the content, such as the kernel and a number of the same certifications. However, it differs in how it's managed - RHEL CoreOS is managed by the machine config operator.
Similarly, Fedora CoreOS is an "edition" of Fedora.
OpenShift Container Platform (OCP) and Red Hat CoreOS (RHCOS) are products from Red Hat that customers can receive support for. If you encounter an issue with either OCP or RHCOS, you can use the official support options or file a Bugzilla report about your issue.
OKD is the community distribution of Kubernetes that powers OpenShift. If you have issues with OKD, you should report the issue on the upstream issue tracker. (Please note that using RHCOS with OKD is not supported.)
As of OpenShift 4.2, by default the kernel command line arguments for networking are persisted. See this PR: coreos/ignition-dracut#89
In cases where you want to have the first boot use DHCP, but subsequent boots
use a different static configuration, you can write the traditional Red Hat Linux
/etc/sysconfig/network-scripts files, or NetworkManager configuration files, and
include them in Ignition.
The MCO does not have good support for "per-node" configuration today, but in the future when it does, writing this as a MachineConfig fragment passed to the installer will make sense too.
The biggest is that Fedora CoreOS does not ship the ifcfg (initscripts) plugin to
NetworkManager. In contrast, RHEL is committed to long term support for initscripts
to maximize compatibility.
The other bit is related to the above - RHCOS has code to propagate kernel commandline arguments to ifcfg files, FCOS doesn't have an equivalent of this for NetworkManager config files.
OS upgrades are integrated with cluster upgrades; so you oc adm upgrade, use
the console etc. See also https://github.com/openshift/machine-config-operator/blob/master/docs/OSUpgrades.md
However, if you're a developer/tester and want to try something different; see this document https://github.com/openshift/machine-config-operator/blob/master/docs/HACKING.md#hacking-on-machine-os-content
For example, to directly switch to the machine-os-content from a release image like
https://openshift-release.svc.ci.openshift.org/releasestream/4.2.0-0.nightly/release/4.2.0-0.nightly-2019-11-06-011942
You could do:
$ oc adm release info --image-for=machine-os-content quay.io/openshift-release-dev/ocp-release:4.2.10
quay.io/openshift-release-dev/ocp-v4.0-art-dev@sha256:02d810d3eb284e684bd20d342af3a800e955cccf0bb55e23ee0b434956221bdd
$ pivot quay.io/openshift-release-dev/ocp-v4.0-art-dev@sha256:02d810d3eb284e684bd20d342af3a800e955cccf0bb55e23ee0b434956221bddLike above, but add oc image info:
$ oc image info $(oc adm release info --image-for=machine-os-content quay.io/openshift-release-dev/ocp-release:4.2.10)
...
Labels: com.coreos.ostree-commit=33dd81479490fbb61a58af8525a71934e7545b9ed72d846d3e32a3f33f6fac9d
version=42.81.20191203.0Here the 81 means it's using RHEL 8.1.
Q: How do I know which RHEL will be in the next release? What are the current versions of RHEL being used in RHCOS?
RHEL CoreOS consumes content from RHEL y-stream releases that have an Extended Update Support (EUS) period of their lifecycle. See the RHEL Lifecycle page for more information.
We generally don't make any statements about which version of RHEL will be used in future OCP/RHCOS releases.
The table below describes the versions of RHCOS/OCP and which versions of RHEL being used.
| RHCOS/OCP version | RHEL version |
|---|---|
| 4.6 | 8.2 EUS |
| 4.7 | 8.4 EUS |
| 4.8 | 8.4 EUS |
| 4.9 | 8.4 EUS |
| 4.10 | 8.4 EUS |
Key packages such as the kernel are exposed as metadata properties:
$ oc image info (oc adm release info --image-for=machine-os-content quay.io/openshift-release-dev/ocp-release:4.9.0-rc.1-x86_64) | grep com.coreos.rpm
com.coreos.rpm.cri-o=1.22.0-68.rhaos4.9.git011c10a.el8.x86_64
com.coreos.rpm.ignition=2.12.0-1.rhaos4.9.el8.x86_64
com.coreos.rpm.kernel=4.18.0-305.17.1.el8_4.x86_64
com.coreos.rpm.kernel-rt-core=4.18.0-305.17.1.rt7.89.el8_4.x86_64
com.coreos.rpm.ostree=2020.7-5.el8_4.x86_64
com.coreos.rpm.rpm-ostree=2020.7-3.el8.x86_64
com.coreos.rpm.runc=1.0.0-74.rc95.module+el8.4.0+11822+6cc1e7d7.x86_64
com.coreos.rpm.systemd=239-45.el8_4.3.x86_64
$The full contents of each RHCOS release are visible in the release browser via the "OS contents" link next to each build. It's a known issue (bug) that this web page is only accessible inside the private RHT network.
Alternately, you can query the metadata directly (but note that this URL is subject to change).
$ curl -Ls https://releases-rhcos-art.cloud.privileged.psi.redhat.com/storage/releases/rhcos-4.5/45.82.202007140205-0/x86_64/commitmeta.json | jq '.["rpmostree.rpmdb.pkglist"][] | select(.[0] == "cri-o")'
[
"cri-o",
"0",
"1.18.2",
"18.rhaos4.5.git754d46b.el8",
"x86_64"
]Today, when Ignition fails, it will wait in an "emergency shell" for 5 minutes. The intention is to avoid "partially provisioned" systems. To debug things, here are a few tips and tricks.
In the emergency shell, you can use systemctl --failed to show units which failed.
From there, journalctl -b -u <unit> may help - for example, journalctl -b -u ignition-files.service.
Usually, you'll have networking in the initramfs, so you can also use e.g. curl to extract data.
See for example this StackExchange question.
See also coreos/ignition#585
When a package is replaced in this fashion, it will remain in place through any subsequent upgrades.
While this can be helpful for short-term fixes, it is important to remember that the package replacement is in place, as the cluster currently has no mechanism for reporting that the node has been changed in this fashion. This kind of package replacement can also leave your nodes exposed to potential problems that are fixed in newer versions of the package.
First, a core part of the design is that the OS upgrades are controlled by and integrated with the cluster. See OSUpgrades.md.
A key part of the idea here with OpenShift 4 is that everything around our continuous integration and delivery pipeline revolves around the release image. The state of the installed system can be derived by that checksum; there aren't other external inputs that need to be mirrored or managed.
Further, you only need a regular container pull secret to be able to
download and mirror OpenShift 4, including the operating system updates.
There is no subscription-manager step required.
Conceptually, RPMs are an implementation detail.
For these reasons, RHCOS does not include any rpm-md (yum) repository
configuration in /etc/yum.repos.d.
See the development doc.
Also reference the docs from the machine-config-operator about
hacking on the machine-os-content
which is the container image that houses the OS content that RHCOS nodes upgrade to.
I am using a non-default AWS region such as GovCloud or AWS China, and when I try to import the AMI I see:
EFI partition detected. UEFI booting is not supported in EC2.
As of OpenShift 4.3, RHCOS has a unified BIOS/UEFI partition layout. As such, it is not compatible with the default aws ec2 import-image API (for more information, see discussions in openshift#396).
Instead, you must use aws ec2 import-snapshot combined with aws ec2 register-image. To learn more about these APIs, see the AWS documentation for importing snapshots and creating EBS-backed AMIs.
In the future the OpenShift installer will likely have support for this.
No, there is no supported mechanism for non-default kernel modules at this time, which includes driver disks.
It's possible to write the serial console data directly to the VMFS volume. You can do this by changing the Virtual Hardware settings of the VM to include a serial port that writes to a file (see screenshot). The official documetation from VMware has additional details.
Alternatively, you can try the OpenStack VMWare Virtual Serial Port Concentrator container.
See https://access.redhat.com/solutions/5500131 The FCOS equivalent is https://docs.fedoraproject.org/en-US/fedora-coreos/access-recovery/
Yes. Multipath is turned on at installation time by using:
coreos-installer install --append-karg rd.multipath=default --append-karg root=/dev/disk/by-label/dm-mpath-root ...If your environment permits it, it's also possible to turn on multipath as a day-2 operation using a MachineConfig object which appends the same kernel arguments. Note however that in some setups, any I/O to non-optimized paths will result in I/O errors. And since there is no guarantee which path the host may select prior to turning on multipath, this may break the system. In these cases, you must enable multipathing at installation time.
Currently, non-default multipath configurations cannot be set at installation time. After booting with the default configuration, you may change the settings in /etc/multipath.conf just like on traditional RHEL (see docs here). If you need these customized settings to take effect from the initrd, then you will need to enable initramfs regeneration via rpm-ostree initramfs --enable and remove the rd.multipath=default kernel argument (e.g. rpm-ostree kargs --delete rd.multipath=default).
Q: Does RHCOS support the use of NetworkManager keyfiles? Does RHCOS support the use of ifcfg files?
Starting with RHCOS 4.6, it is possible to use either NetworkManager keyfiles or ifcfg files for configuring host networking. It is strongly preferred to use NetworkManager keyfiles.
RHCOS inherits the majority of its configuration from Fedora CoreOS, so we aim to keep the package manifests between the two as closely aligned as possible. If you wish to have a package added to RHCOS, you should first suggest the inclusion of the package in Fedora CoreOS via a new issue on the fedora-coreos-tracker repo.
If the package makes sense to include in Fedora CoreOS, it will ultimately be included in RHCOS in the future when the fedora-coreos-config submodule is updated in this repo.
If the package is not included in Fedora CoreOS, you may submit a PR to this repo asking for the inclusion of the package with the reasoning for including it.
The process for Kernel and Kernel-RT is almost the same. For Kernel-RT you need to override remove and install, and use
the kernel-rt-kvm package instead of kernel-rt package. As following:
rpm-ostree override remove kernel kernel-core kernel-modules kernel-modules-extra --install kernel-rt-core-4.18.0-305.34.2.rt7.107.el8_4.x86_64.rpm --install kernel-rt-kvm-4.18.0-305.34.2.rt7.107.el8_4.x86_64.rpm --install kernel-rt-modules-4.18.0-305.34.2.rt7.107.el8_4.x86_64.rpm --install kernel-rt-modules-extra-4.18.0-305.34.2.rt7.107.el8_4.x86_64.rpm
For the normal Kernel only override replace is enough:
rpm-ostree override replace kernel-{,modules-,modules-extra-,core-}4.18.0-305.34.2.107.el8_4.x86_64.rpm