From 5a33ea5ff2131e1d028e8811d8f85c5da355195d Mon Sep 17 00:00:00 2001 From: trexminer <44735836+trexminer@users.noreply.github.com> Date: Thu, 11 Nov 2021 18:14:07 +1100 Subject: [PATCH] Update README.md --- README.md | 33 ++++++++++++++++++++++++++++----- 1 file changed, 28 insertions(+), 5 deletions(-) diff --git a/README.md b/README.md index 6c24e88..d7e43ec 100644 --- a/README.md +++ b/README.md @@ -52,19 +52,26 @@ Full list of command line options: --lhr-coin Set coin name for --lhr-algo. --lhr-tune [Ethash, Autolykos2] LHR tuning value that indicates the percentage of the full speed the miner tries to achieve for LHR cards (default: -1). Range from 10 to 95. - -1 - auto-mode (LHR tune is set to 71 (or 68 in low power mode) for LHR cards and 0 for non-LHR) + -1 - auto-mode (LHR tune is set to 74 (or 68 in low power mode) for LHR cards and 0 for non-LHR) 0 - disabled (use for non-LHR cards) 30 - recommended starting value for most LHR cards in LHR unlock dual mining mode (see --lhr-algo) 68 - recommended starting value for most LHR cards in low power mode (see --lhr-low-power) - 71 - recommended starting value for most LHR cards + 74 - recommended starting value for most LHR cards Can be set for each GPU separately, e.g. - "lhr-tune": "0,0,71.5,0" - this will set LHR tuning value to 71.5 for the third GPU. + "lhr-tune": "0,0,74.5,0" - this will set LHR tuning value to 74.5 for the third GPU. --lhr-autotune-mode [Ethash, Autolykos2] LHR auto-tune mode (default: full). Valid values: off - auto-tune is disabled. LHR tune value is fixed during mining, and will not change no matter how often LHR lock is detected down - LHR tune value will decrease if the miner detects LHR lock full - same as "down" but additionally miner will be trying to increase LHR tune value if it's stable on the current LHR tune level + --lhr-autotune-step-size LHR auto-tune step size (default: 0.5). + Indicates by how much LHR tune value is changed by the LHR auto-tuner. + --lhr-autotune-interval LHR auto-tune time interval in minutes (default: 20). + Amount of time the GPU must be mining without hitting LHR locks before the miner + increases LHR tune value. + Also, if the GPU has triggered an LHR lock, LHR tune value will not decrease if + the previous LHR lock was detected more than "--lhr-autotune-interval" minutes ago. --lhr-low-power [Ethash, Autolykos2] Reduces power consumption in LHR mode at a cost of a slightly lower hashrate. --kernel [Ethash] Choose CUDA kernel (default: 0). Range from 0 to 5. Set to 0 to enable auto-tuning: the miner will benchmark each kernel and select the fastest. @@ -82,6 +89,15 @@ Full list of command line options: 2 - recommended for 30xx cards to prevent invalid shares Can be set to a comma separated list to apply different values to different cards. (eg: --dag-build-mode 1,1,2,1) + --dataset-mode [Autolykos2] Dataset mode. (default: 2). Valid values: + 0 - auto (defaults to 2) + 1 - single (each ERGO block the GPU stops hashing until it generates the dataset) + 2 - double (the miner generates the dataset for the next ERGO block before it arrives + with a small penalty to reported hashrate, and when the next block does arrive, it + immediately starts hashing without losing 1-4 seconds on creating the dataset). + Memory requirements are doubled in this mode as the GPU has to hold two memory buffers. + If there is not enough memory on the GPU for two datasets, the miner will fall back + to single buffer mode. --keep-gpu-busy Continue mining even in case of pool connection loss. Useful when a GPU crashes during start/stop cycle that occurs when internet connection goes down. @@ -103,16 +119,18 @@ Full list of command line options: --pass2 Password for mining server used for second algo in dual mining mode. -w, --worker Worker name. --worker2 Worker name for mining server used for second algo in dual mining mode. + --proxy IP:port for connection via SOCKS5 proxy server. -r, --retries Number of times to retry if a network call fails. -R, --retry-pause Pause in seconds between retries. -T, --timeout Network timeout, in seconds (default: 300) --time-limit Miner shutdown interval in seconds. (default: 0 - disabled) - --temperature-color Set temperature color for GPUs stat. Example: 55,65 - it means that + --temperature-color Set core temperature color for GPUs stat. Example: 55,65 - it means that temperatures above 55 will have yellow color, above 65 - red color. (default: 67,77) --temperature-limit GPU shutdown temperature. (default: 0 - disabled) --temperature-start GPU temperature to enable card after disable. (default: 0 - disabled) + --temperature-color-mem Set memory temperature color for GPUs stat. (default: 80,100) --api-bind-http IP:port for the miner API via HTTP (default: 127.0.0.1:4067). Set to 0 to disable. For external access set IP to 0.0.0.0, in which case setting "--api-read-only" is @@ -127,7 +145,7 @@ Full list of command line options: --api-webserver-cert Full path to API web server certificate file. --api-webserver-pkey Full path to API web server private key file. - -N, --hashrate-avr Sliding window length in seconds used to compute average hashrate (default: 60). + -N, --hashrate-avr Sliding window length in seconds used to compute average hashrate (default: 60, max: 86400). --sharerate-avr Sliding window length in seconds used to compute sharerate (default: 600). --gpu-report-interval GPU stats report frequency. Minimum is 5 sec. (default: 30 sec) --gpu-report-interval-s GPU stats report frequency in shares. 0 by default (disabled). @@ -262,6 +280,11 @@ Full list of command line options: t-rex -a ethash --lhr-algo autolykos2 -o stratum+tcp://eu1.ethermine.org:4444 -u 0x1f75eccd8fbddf057495b96669ac15f8e296c2cd -p x -w rig0 --url2 stratum+tcp://pool.woolypooly.com:3100 --user2 9gpNWA3LVic14cMmWHmKGZyiGqrxPaSEvGsdyt7jt2DDAWDQyc9.rig0 --pass2 x ``` +* **LHR-unlock-dual-ETH+FIRO**
+``` +t-rex -a ethash --lhr-algo firopow -o stratum+tcp://pool.woolypooly.com:3096 -u 0x1f75eccd8fbddf057495b96669ac15f8e296c2cd -p x -w rig0 --url2 stratum+tcp://firo.2miners.com:8181 --user2 aBR3GY8eBKvEwjrVgNgSWZsteJPpFDqm6U.rig0 --pass2 x +``` + * **LHR-unlock-dual-ETH+RVN**
``` t-rex -a ethash --lhr-algo kawpow -o stratum+tcp://eth.2miners.com:2020 -u 0x1f75eccd8fbddf057495b96669ac15f8e296c2cd -p x -w rig0 --url2 stratum+tcp://rvn.2miners.com:6060 --user2 RBX1G6nYDMHVtyaZiQWySMZw1Bb2DEDpT8.rig0 --pass2 x