NCOS SDK and Sample Applications.

---

This software, including any sample applications, and associated documentation (the "Software"), are subject to the Cradlepoint Terms of Service and License Agreement available at https://cradlepoint.com/terms-of-service (“TSLA”).

NOTWITHSTANDING ANY PROVISION CONTAINED IN THE TSLA, CRADLEPOINT DOES NOT WARRANT THAT THE SOFTWARE OR ANY FUNCTION CONTAINED THEREIN WILL MEET CUSTOMER’S REQUIREMENTS, BE UNINTERRUPTED OR ERROR-FREE, THAT DEFECTS WILL BE CORRECTED, OR THAT THE SOFTWARE IS FREE OF VIRUSES OR OTHER HARMFUL COMPONENTS. THE SOFTWARE IS PROVIDED “AS-IS,” WITHOUT ANY WARRANTIES OF ANY KIND. ANY USE OF THE SOFTWARE IS DONE AT CUSTOMER’S SOLE RISK AND CUSTOMER WILL BE SOLELY RESPONSIBLE FOR ANY DAMAGE, LOSS OR EXPENSE INCURRED AS A RESULT OF OR ARISING OUT OF CUSTOMER’S USE OF THE SOFTWARE. CRADLEPOINT MAKES NO OTHER WARRANTY, EITHER EXPRESSED OR IMPLIED, WITH RESPECT TO THE SOFTWARE. CRADLEPOINT SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE OR NON-INFRINGEMENT.

Copyright © 2018 Cradlepoint, Inc. All rights reserved.

---

This directory contains the NCOS SDK tools and sample applications. Below is a description of each. The Router Applications Development Guide is the best document to read first.

Documents

• README.html
  • This README file.
• Router_Application_Development_Guide.html
  • The main document that describes application development.
• Router_APIs_for_Applications.html
  • The router config store API in the router.

Sample Application Directories

• app_template
  • A skeleton template for the creation of a new application.
• Boot1
  • On bootup, this application will select test the connection of each sim in a dual sim modem and enable the best.
• ftp_client
  • Creates a file and uploads it to an FTP server.
• ftp_server
  • Creates an FTP server in the device. A USB memory device is used as the FTP directory.
• gps_probe
  • Probe the GPS hardware and log the results.
• hello_world
  • Outputs a 'Hello World!' log every 10 seconds.
• hspt
  • Sets up a custom Hot Spot landing page.
• ibr1700_gnss
  • Demonstrates how to access the gyroscope and accelerometer data on the IBR1700
• ibr1700_obdII
  • Demonstrates how to access OBD-II PIDs on the IBR1700
• mqtt_app
  • Demonstrated MQTT using the paho library
• ping
  • Ping an address and log the results.
• python_module_list
  • This app will log the python version and modules in the device. It is intended to help with app development to show the python environment within the device.
• send_to_server
  • Gets the '/status' from the device config store and send it to a test server.
• simple_custom_dashboard
  • Creates a simple dashboard using HTML and JS. Note that any 'server function' requires the router firewall to be correctly changed to allow client access to the router.
• simple_web_server
  • A simple web server to receive messages. Note that any 'server function' requires the router firewall to be correctly changed to allow client access to the router.

SDK Directories

• tools
  • Contains support files for the SDK. There is also a simple python syslog server that can be used during application development.

Files

• make.py
  • The main python tool used to build application packages and install, uninstall, start, stop, or purge from a locally connected device that is in DEV mode.
• sdk_settings.ini
  • This is the ini file that contains the settings used by python make.py.