From 84d6d7393f6b55295690eac4376e86b3206cbebb Mon Sep 17 00:00:00 2001 From: Nick Winans Date: Fri, 4 Oct 2024 15:14:05 -0700 Subject: [PATCH] Update nice-nano.mdx --- docs/build-guides/lily58-wireless/nice-nano.mdx | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/build-guides/lily58-wireless/nice-nano.mdx b/docs/build-guides/lily58-wireless/nice-nano.mdx index e167ff7..33a8308 100644 --- a/docs/build-guides/lily58-wireless/nice-nano.mdx +++ b/docs/build-guides/lily58-wireless/nice-nano.mdx @@ -48,7 +48,7 @@ If you're using the included headers, you'll need to install your battery **befo ``` Since these are ***no***-solder headers, you won't need to solder anything. Just follow the steps below to install your header to the PCB. - 1. Take your headers (the part with the holes) and insert them into the top of the PCB (the side with the JST, power switch, and reset button) + 1. Take your headers and insert them into the top of the PCB (the side with the JST, power switch, and reset button) 2. Use the plastic part of the header to push the pins into the PCB. The plastic should be flush with the PCB when fully inserted ```mdx-code-block