We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
盒子s905x,p212.dts 原电视系统,安卓3.14内核心中显示正常,设置如下: internal_eth_pins { amlogic,setmask = <0x4 0x3000000>; amlogic,clrmask = <0x3 0x300000>; amlogic,pins = "GPIOZ_14", "GPIOZ_15"; linux,phandle = <0x2e>; phandle = <0x2e>; };
armbian dts设置如下:
&internal_phy { pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; pinctrl-names = "default"; };
刷armbian 选p212.dtb启动后,没有插网线时,网络连接指示灯亮起,插上网线指示灯熄灭,请怎么更改dts中的设置,使其显示正常?
The text was updated successfully, but these errors were encountered:
No branches or pull requests
盒子s905x,p212.dts
原电视系统,安卓3.14内核心中显示正常,设置如下:
internal_eth_pins {
amlogic,setmask = <0x4 0x3000000>;
amlogic,clrmask = <0x3 0x300000>;
amlogic,pins = "GPIOZ_14", "GPIOZ_15";
linux,phandle = <0x2e>;
phandle = <0x2e>;
};
armbian dts设置如下:
&internal_phy {
pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>;
pinctrl-names = "default";
};
刷armbian 选p212.dtb启动后,没有插网线时,网络连接指示灯亮起,插上网线指示灯熄灭,请怎么更改dts中的设置,使其显示正常?
The text was updated successfully, but these errors were encountered: